Manual do usuário La Crosse Technology WS-9228U-IT

Resumo do conteúdo contido na página número 1

TABLE OF CONTENTS
WS-9228U-IT
Topic Page
Wireless 915 MHz
Inventory of Contents/Additional Equipment
About WWVB
Radio-controlled Weather Station
Quick Set-Up Guide

Detailed Set-Up Guide
Instruction Manual
Battery installation
Program Mode

Program Sequence and Default Settings

Function Keys

Setting the LCD Contrast

Setting the Time Zone

Daylight Saving Time Setting
Radio-controlled Time Setting
12/24-hour Time Setting

Setting the

Resumo do conteúdo contido na página número 2

To complete the set up of your Wireless Weather Station after the 15 minutes have passed * When the signal is successfully received by the Weather Station, the icon will be please follow the steps that follow in the Detailed Set-Up Guide. switched on. (If not successful, the icon will not be shown in LCD) So the user can easily see whether the last reception was successful (icon on) or not (icon off). On the DETAILED SET-UP GUIDE other hand, the short blinking of the icon shows that a recept

Resumo do conteúdo contido na página número 3

Note: When in the 12-hour format “P.M.” will appear to the left of the hour 6. Press and release the SET button to confirm and advance to the day/month in the time LCD between the hours of noon and midnight. setting. 7. The day and month will flash in the date LCD. 6. Press and release the SET button to confirm and advance to the time setting. VIII. TIME SETTING There are two methods by which the time and date can be set: A) Automatically via WWVB reception, or 8. Press and rel

Resumo do conteúdo contido na página número 4

IV. MINIMUM AND MAXIMUM TEMPERATURE RECORDS V. ALARM FUNCTION The WS-9228U-IT keeps a record of the MINIMUM and MAXIMUM temperature, and the time and date of their occurrence—for both the indoor and outdoor modes. A. SETTING THE ALARM (alarms 1 and 2) A. VIEWING THE INDOOR TEMPERATURE AND HUMIDITY RECORDS Note: There are two alarms that can set. Each alarm will sound for a complete 1. Press the IN button once. “MIN” appears above the indoor duration of 2 minutes. temperature an

Resumo do conteúdo contido na página número 5

the case can act as a heat sink to absorb and store heat from external sources (i.e. handling of the case or radiant heat). Also, the much greater range of the outdoor temperature sensor requires a different calibration curve than the indoor range. Error is usually greater at the extreme ends of a range, making it harder to compare B. WALL MOUNTING different ranges with different curves. Under non-laboratory conditions, it is difficult to 1) Remove the table-stand. To do this, pull do