Manual do usuário Tamarack Technologies HV1000

Resumo do conteúdo contido na página número 1

HV1000 Remote Control Installation Instructions
HVRC.3

It is strongly recommended that this kit be installed by a qualified professional. Some state and local codes require
electrical wiring be performed by a licensed electrician. Check with your local code officials before installation.


Part Number: TTi-HVRC
The HVRC includes the following items:

Qty Description
1 Black box with cover and hardware
1 Romex Clamp
1 2” Lg. Velcro Strip
1 3/4" Lg. Protective Sleeve
3 Yellow Wire

Resumo do conteúdo contido na página número 2

For installations without a wall switch: Twist the two Red wires from the HV1000 and the remote receiver (inside the black box) together with the incoming line HOT and secure with a yellow wire nut. Twist the three White wires from the HV1000, the remote receiver and the incoming line NEUTRAL together and secure with a wire nut. Twist the two Black wires from the HV1000 and the remote receiver together and secure with a wire nut. (Figure 4) Figure 4 For installations with a wall