Resumo do conteúdo contido na página número 1
KDC-W6027
KDC-WV6027
CD-RECEIVER
INSTRUCTION MANUAL
© B64-2704-00/00 (EN/E2N/EW/E2W)
Resumo do conteúdo contido na página número 2
Contents Safety precautions 3 Menu system 22 Menu System Notes 5 Security Code Touch Sensor Tone Notes on playing MP3/WMA 6 Manual Clock Adjustment Synchronize Clock About CDs 8 DSI (Disabled System Indicator) Selectable Illumination General features 9 Switching Display Type Power Illumination Color Setting Selecting the Source Contrast Adjustment Volume Dimmer System Q Switching preout Audio Control News Bulletin with Timeout Setting Speaker Setting Local Seek Subwoofer Output Tuning Mode TEL M
Resumo do conteúdo contido na página número 3
Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the To prevent damage to the machine, take following precautions: the following precautions: • Insert the unit all the way in until it is fully locked • Make sure to ground the unit to a negative 12V in place. Otherwise it may fall out of place when DC power supply. jolted. • Do not open the top or bottom covers of the unit. • When extending the ignition, battery, or ground • Do not install the unit in a spot exposed to dire
Resumo do conteúdo contido na página número 4
Safety precautions About CD players/disc changers NOTE connected to this unit • If you experience problems during installation, KENWOOD disc changers/ CD players released in consult your Kenwood dealer. 1998 or later can be connected to this unit. • If the unit fails to operate properly, press the Reset Refer to the catalog or consult your Kenwood button. The unit returns to factory settings when dealer for connectable models of disc changers/ the Reset button is pressed. If the unit stil
Resumo do conteúdo contido na página número 5
Notes Cleaning the Unit About GSM Hands Free Unit If the faceplate of this unit is stained, wipe it with a Refer to the instruction manual of GSM Hands dry soft cloth such as a silicon cloth. Free Unit KCA-HF521 (optional accessory), when If the faceplate is stained badly, wipe the stain off connected, for the operation method. with a cloth moistened with neutral cleaner, then The locations of the buttons to be pressed are wipe neutral detergent off. shown below. SRC MENU • Applying spray cle
Resumo do conteúdo contido na página número 6
Notes on playing MP3/WMA Note, however, that the MP3/WMA recording media and formats acceptable are limited. When • Play mode may not be possible when portions of the writing MP3/WMA, pay attention to the following functions of Windows Media Player 9 or higher are used. restrictions. Entering ID3 tag Acceptable media The Displayable ID3 tag is ID3 version 1.x. The MP3/WMA recording media acceptable to this For the character code, refer to the List of Codes. unit are CD-ROM, CD-R, and CD-RW.
Resumo do conteúdo contido na página número 7
MP3/WMA playing order When selected for play, Folder Search, File Search, When a File Search is executed with file ¡$ or for Folder Select, files and folders are accessed being played ... in the order in which they were written by the CD Operation of writer. (Current file: ¡$) the button Because of this, the order in which they are expected to be played may not match the order in 4 Button Beginning of file ¡$ ➜ ¡# which they are actually played. You may be able to ¢ Button ¡% ➜ ¡& set t
Resumo do conteúdo contido na página número 8
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use
Resumo do conteúdo contido na página número 9
General features Q/ Release button SRC AUD FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM FM AM/ VOL DISP 4/¢ SW Power • This unit automatically turns full power OFF after 20 Turning ON the Power minutes lapses in Standby mode in order to save the Press the [SRC] button. vehicles battery. The time until full power OFF can be set in 'Power OFF Timer' (page 26). • When the power is ON, the 'Security Code' (page 22) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC]
Resumo do conteúdo contido na página número 10
General features System Q Front/Rear High Pass "HPF" THRU/100/125/170 Hz Filter You can recall the best sound setting preset for Sub woofer Low Pass "LPF SW" 50/80/120/THRU Hz different types of music. Filter* Volume offset "V-offset" –8 — ±0 1 Select the source to set Loudness "LOUD" ON/OFF Press the [SRC] button. 2 Select the Sound type Press the [Q] button. • Volume offset: Each source’s volume can be set as a Each time the button is pressed the sound difference from the basic volume. set
Resumo do conteúdo contido na página número 11
displayed for 5 seconds instead of the Program Subwoofer Output Service name. Turning the Subwoofer output ON or OFF. In CD & External disc source Press the [SW] button for at least 1 second. Each time the button is pressed Subwoofer Information Display output switches ON or OFF. Disc title "D-TITLE" When it’s ON, "Sub-W ON" is displayed. Track title "T-TITLE" Track number & Play time "P-Time" Disc name "DNPS" • You can control this function when 'Switching preout' Clock (page 25) is set to "S
Resumo do conteúdo contido na página número 12
General features Auxiliary Input Display Setting Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX EXT" display. 2 Enter Auxiliary input display setting mode Press the [DISP] button for at least 2 seconds. The presently selected AUX Name is blinks. • The faceplat e is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, 3 Select the Auxiliary input display keep
Resumo do conteúdo contido na página número 13
Tuner features SRC MENU FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM AM 4/¢ 1–6 FM ST indicator Preset station number Band display Frequency display Tuning Station Preset Memory Selecting the station. Putting the station in the memory. 1 Select tuner source 1 Select the band Press the [SRC] button. Press the [FM] or [AM] button. Select the "TUNER" display. 2 Select the frequency to put in the memory 2 Select the band Press the [4] or [¢] button. Press the [FM] or [AM] button. 3 Put the frequen
Resumo do conteúdo contido na página número 14
Tuner features Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select the Auto Memory Entry mode Press the [FM] or [AM] button. Select the "Auto-Memory" display. 4 Open Auto Memory Entry Press the [4] or [¢] button for at least 2 seconds. When 6 stations that can be received are put in the memory Aut
Resumo do conteúdo contido na página número 15
RDS features SRC PTY FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM 4/¢ FM AM 1–6 DISP TI TI indicator RDS indicator PTY indicator NEWS indicator Traffic Information Radio Text Scroll Switching to traffic information automatically Scrolling the displayed radio text. when a traffic bulletin starts even when you aren’t Press the [DISP] button for at least 1 second. listening to the radio. Press the [TI] button. Each time the button is pressed the Traffic Information function turns ON or OFF. Whe
Resumo do conteúdo contido na página número 16
RDS features PTY (Program Type) Selecting the Program Type and searching for a • Speech and Music include the Program type shown station. below. Music: No.12 — 17, 26 — 30 1 Enter PTY mode Speech: No.3 — 11, 18 — 25, 31 Press the [PTY] button. • The Program Type can be put in the [1] — [6] button During PTY mode the "PTY" indicator is ON. memory and called up quickly. Refer to the 'Program Type preset' (page 16). • The display language can be changed. Refer to • This function can’t be used
Resumo do conteúdo contido na página número 17
Changing Language for PTY Function Selecting the Program Type display language. 1 Enter PTY mode Refer to 'PTY (Program Type)' (page 16). 2 Enter Changing Language mode Press the [DISP] button. 3 Select the language Press the [FM] or [AM] button. Each time the button is pressed the language switches as shown below. Language Display English "English" French "French" Swedish "Swedish" German "German" 4 Exit Changing Language mode Press the [DISP] button. | English 17
Resumo do conteúdo contido na página número 18
CD/MP3/WMA/External disc control features Release button SRC 38 FM AUD SRC 38 AM MENU SCAN RDM REP F.SEL M.RDM 4/¢ DISC+/ DISC–/ SCAN RDM/ REP F.SEL M.RDM DISP/ NAME.S/ FM AM 3 SCRL Disc number IN indicator Pause and play Playing CD & MP3/WMA Press the [38] button. Each time the button is pressed it pauses and When there is no disc inserted plays. 1 Drop open the faceplate Press the Release button. Eject the disc 2 Insert a disc. 1 Drop open the faceplate Press the Release button. 3 Press the f
Resumo do conteúdo contido na página número 19
Track/File Search Searching for a song on the disc or in the MP3/ • The MP3/WMA media that this unit can play are CD- WMA folder. ROM, CD-R, and CD-RW. The medium formats must be ISO 9660 Level 1, Level Press the [4] or [¢] button. 2, Joliet, or Romeo. The methods and precautions to be followed for writing MP3/WMA data are covered in 'Notes on playing MP3/WMA' (page 6). • If the remote with number buttons is used as optional Check that section before creating your MP3/WMA accessories, a so
Resumo do conteúdo contido na página número 20
CD/MP3/WMA/External disc control features "Select Mode" is displayed. Scan Play During Select mode the folder information is Playing the first part of each song on the disc displayed as shown below. or MP3/WMA folder you are listening to and Folder name display searching for the song you want to listen to. Displays the current folder name. 1 Start Scan Play Press the [SCAN] button. "Scan ON" is displayed. 2 Release it when the song you want to listen to is played 2 Select the folder level Pr
