Manual do usuário Aube Technologies TH111GFCI-NP

Resumo do conteúdo contido na página número 1

This thermostat should be installed by an electrician or experienced technician.
MODEL TH111GFCI-NP 120 VAC
The thermostat must be used with a circuit breaker or fuse.
SUMMARY
This thermostat was designed to control floor electric heating systems. The
resistive load must not exceed 2000 watts @ 120 VAC (16.7 A). The
OPTIONS SELECTION
thermostat is equipped with a ground fault circuit interrupter (GFCI) and
At the back of the thermostat, there is one selection switches to set at
therefore the iso

Resumo do conteúdo contido na página número 2

POWER UP • Recording a setpoint temperature for the (ECONOMIC) setting To power up thermostat: Select chosen setpoint temperature by using and buttons. Keep pressing on the button (2 to 3 seconds) until icon appears on display. • Recording a setpoint temperature for the (VACATION) setting To program the Vacation temperature, select the desired degree using the When power is applied for the first time, buttons and press on the and buttons simultaneously until the the d