Manual do usuário Aube Technologies TH115 A/F/AF

Resumo do conteúdo contido na página número 1

TH115 Description Switch Selection Control Module Installation
TH115 A/F/AF
Owner’s Guide Align the bracket tabs on the control module with the
This thermostat is factory-set to the following values:
Buttons and symbols
holes located on top of the power base.
On/Stand By Switch
#Function UPDN
Thank you for choosing the AubeTH115, a
Use this switch to put the thermostat in sleep mode Control module
a
SW1 °F °C
Temperature format
programmable thermostat that provides both energy
when its use is

Resumo do conteúdo contido na página número 2

Custom Grid Pre-programmed Schedule Modify the Schedule Remote Input Use this blank grid to record your new schedule. The TH115 programmable thermostat is pre-programmed Notes: The TH115 is equipped with a remote input which allows Prog Setpoint MO TU WE TH FR SA SU with the following schedule: connection of a telephone controller (accessory You can program up to 4 different programs per day. Aube CT240) or any other remote control system. Each day can have different programs. When a signal is

Resumo do conteúdo contido na página número 3

PB112-024T-15S Installation Instructions 24 V Low-Voltage Power Base 1. Install the control module onto the base. Applications Apply power to the heating system. The PB112-024T-15S power base can be used on any TH11x series Verify the installation by checking that the heating system can be thermostat (with the exception of the TH110 model). This low-voltage turned on or off using the thermostat. power base operates on 15-second cycles and can be connected to a line-voltage load using a soli