Resumo do conteúdo contido na página número 1
POM31V20611 FRC800 Cover.ai 11/2/2011 11:12:53 AM
Owner ’s Manual
PUMP
WB20XT/WB30XT
00X31YG36100 © 2011 Honda Motor Co., Ltd.—All Rights Reserved
Resumo do conteúdo contido na página número 2
11/08/01 15:03:19 31YG3610_001 The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Keep this owner’s manual handy so you can refer to it at any time. This owner’s manual is considered a permanent part of the water pump and should remain with the water pump if resold. The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Lt
Resumo do conteúdo contido na página número 3
11/08/01 15:03:26 31YG3610_002 INTRODUCTION Congratulations on your selection of a Honda water pump. We are certain you will be pleased with your purchase of one of the finest water pumps on the market. We want to help you get the best results from your new water pump and to operate it safely. This manual contains the information on how to do that; please read it carefully. As you read this manual, you will find information preceded by a symbol. That information is intended to help you avoid dam
Resumo do conteúdo contido na página número 4
11/08/01 15:03:38 31YG3610_003 INTRODUCTION A FEW WORDS ABOUT SAFETY Your safety and the safety of others are very important. And using this water pump safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others. Of course, it is not practical or possible to warn you about all the hazards associated w
Resumo do conteúdo contido na página número 5
11/08/01 15:03:42 31YG3610_004 CONTENTS PUMP SAFETY ........................................................................................... 5 IMPORTANT SAFETY INFORMATION ................................................. 5 SAFETY LABEL LOCATIONS ................................................................. 7 CONTROLS ................................................................................................. 8 COMPONENT & CONTROL LOCATIONS ...........................................
Resumo do conteúdo contido na página número 6
11/08/01 16:11:30 31YG3610_005 CONTENTS SERVICING YOUR PUMP (continued) AIR FILTER INSPECTION ..................................................................... 34 AIR FILTER CLEANING ........................................................................ 35 SEDIMENT CUP CLEANING ................................................................ 36 SPARK PLUG SERVICE ........................................................................ 37 SPARK ARRESTER SERVICE (optional equipment) ........
Resumo do conteúdo contido na página número 7
11/08/01 15:03:56 31YG3610_006 PUMP SAFETY IMPORTANT SAFETY INFORMATION Honda WB20XT and WB30XT pumps are designed to pump only water that is not intended for human consumption, and other uses can result in injury to the operator or damage to the pump and other property. Most injuries or property damage can be prevented if you follow all instructions in this manual and on the pump. The most common hazards are discussed below, along with the best way to protect yourself and others. Operator Respo
Resumo do conteúdo contido na página número 8
11/08/01 15:04:03 31YG3610_007 PUMP SAFETY Hot Exhaust The muffler becomes very hot during operation and remains hot for a while after stopping the engine. Be careful not to touch the muffler while it is hot. Let the engine cool before transporting the pump or storing it indoors. To prevent fire hazards, keep the pump at least 3 feet (1 meter) away from building walls and other equipment during operation. Do not place flammable objects close to the engine. Carbon Monoxide Hazard Exhaust contains
Resumo do conteúdo contido na página número 9
11/08/01 15:04:21 31YG3610_008 PUMP SAFETY SAFETY LABEL LOCATIONS The labels shown here contain important safety information. Please read them carefully. These labels are considered permanent parts of your pump. If a label comes off or becomes hard to read, contact an authorized Honda servicing dealer for a replacement. 7
Resumo do conteúdo contido na página número 10
11/08/01 15:04:29 31YG3610_009 CONTROLS COMPONENT & CONTROL LOCATIONS WB20XT THROTTLE LEVER DISCHARGE PORT CHOKE FUEL FILLER CAP LEVER FUEL VALVE LEVER OIL FILLER CAP/DIPSTICK RECOIL STARTER GRIP IGNITION SWITCH STRAINER PRIMING WATER MUFFLER FRAME FILLER CAP AIR CLEANER SUCTION PORT PUMP DRAIN CAP OIL DRAIN PLUG 8
Resumo do conteúdo contido na página número 11
11/08/01 15:04:35 31YG3610_010 CONTROLS WB30XT THROTTLE LEVER DISCHARGE PORT CHOKE FUEL FILLER CAP LEVER FUEL VALVE LEVER OIL FILLER CAP/DIPSTICK RECOIL STARTER GRIP IGNITION SWITCH STRAINER PRIMING WATER MUFFLER FRAME FILLER CAP AIR CLEANER SUCTION PORT PUMP DRAIN CAP OIL DRAIN PLUG 9
Resumo do conteúdo contido na página número 12
11/08/01 15:04:46 31YG3610_011 CONTROLS CONTROLS Fuel Valve Lever FUEL VALVE LEVER The fuel valve opens and closes the passage between the fuel tank and the carburetor. The fuel valve lever must be in the ON position for the engine to run. When the engine is not in use, leave the fuel valve lever in the ON OFF position to prevent carburetor flooding and to reduce OFF the possibility of fuel leakage. Ignition Switch IGNITION SWITCH The ignition switch controls the ignition system. ON The ignition
Resumo do conteúdo contido na página número 13
11/08/01 15:04:56 31YG3610_012 CONTROLS Choke Lever CHOKE LEVER The choke lever opens and closes the choke valve in the carburetor. The CLOSED position enriches the fuel mixture for starting a cold engine. OPEN The OPEN position provides the C CL LO OS SE ED D correct fuel mixture for operation after starting, and for restarting a warm engine. Throttle Lever The throttle lever controls engine THROTTLE LEVER speed. Moving the throttle lever in the directions shown makes the engine run faster or s
Resumo do conteúdo contido na página número 14
11/08/01 15:05:01 31YG3610_013 CONTROLS Recoil Starter Grip Pulling the recoil starter grip operates the recoil starter to crank the engine. RECOIL STARTER GRIP 12
Resumo do conteúdo contido na página número 15
11/08/01 15:05:08 31YG3610_014 BEFORE OPERATION ARE YOU READY TO GET STARTED? Your safety is your responsibility. A little time spent in preparation will significantly reduce your risk of injury. Knowledge Read and understand this manual. Know what the controls do and how to operate them. Familiarize yourself with the pump and its operation before you begin pumping. Know what to do in case of emergencies. Be sure of what you are pumping. This pump is designed to pump only fresh water that is not
Resumo do conteúdo contido na página número 16
11/08/01 15:05:17 31YG3610_015 BEFORE OPERATION IS YOUR PUMP READY TO GO? For your safety, and to maximize the service life of your equipment, it is very important to take a few moments before you operate the pump to check its condition. Be sure to take care of any problem you find, or have your servicing dealer correct it, before you operate the pump. Improperly maintaining this pump, or failing to correct a problem before operation, could cause a malfunction in which you could be seriously inj
Resumo do conteúdo contido na página número 17
11/08/01 15:05:27 31YG3610_016 BEFORE OPERATION Check the Suction and Discharge Hoses Check the general condition of the hoses. Be sure the hoses are in serviceable condition before connecting them to the pump. Remember that the suction hose must be reinforced construction to prevent hose collapse. Check that the sealing washer in the suction hose connector is in good condition (see page 18 ). Check that the hose connectors and clamps are securely installed (see pages 18 and 19 ). Check that the
Resumo do conteúdo contido na página número 18
11/08/01 15:05:35 31YG3610_017 OPERATION SAFE OPERATING PRECAUTIONS To safely realize the full potential of this pump, you need a complete understanding of its operation and a certain amount of practice with its controls. Before operating the pump for the first time, please review the IMPORTANT SAFETY INFORMATION on page 5 and the chapter titled BEFORE OPERATION. For your safety, avoid starting or operating the engine in an enclosed area, such as a garage. Your engine’s exhaust contains poisonou
Resumo do conteúdo contido na página número 19
11/08/01 15:05:42 31YG3610_018 OPERATION PUMP PLACEMENT For best pump performance, place the pump near the water level, and use hoses that are no longer than necessary. That will enable the pump to produce the greatest output with the least self-priming time. As head (pumping height) increases, pump output decreases. The length, type, and size of the suction and discharge hoses can also significantly affect pump output. Discharge head capability is always greater than suction head capability, so
Resumo do conteúdo contido na página número 20
11/08/01 15:05:53 31YG3610_019 OPERATION SUCTION HOSE INSTALLATION Use a commercially available hose and hose connector with the hose clamp provided with the pump (if necessary). Most hoses come with the connectors already installed. The suction hose must be reinforced with a noncollapsible wall or braided wire construction and cannot contain any perforations. Do not use a hose smaller than the pump’s suction port size. Minimum hose size: WB20XT= 2 in (50 mm) WB30XT= 3 in (80 mm) The suction hos
