Resumo do conteúdo contido na página número 1
Owner's Manual & Assembly Instructions
[]NOI
Model No. KM1010 D SC1010D
697.68101D
CAUTION: SOME PARTS HAVE SHARP EDGES. CARE
MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES
TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ
713681207
SAFETY INFORMATION PROVIDED IN THIS MANUAL
BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES
BUILDING DIMENSIONS
* Size rounded off to the nearest foot
WHEN HANDLING METAL PARTS.
Exterior Dimensions Interior Dimensions Door
*Approx. Foundation Storage Area (Roof Edge to Roof
Resumo do conteúdo contido na página número 2
BEFORE YOU BEGIN.... A2 Owner's Manual Before beginning construction, check local building codes regarding footings, location and other requirements. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly Instructions: Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructions before you begin, and during assembly, follow the step sequen
Resumo do conteúdo contido na página número 3
PLAN AHEAD.... A3 Watch the Weather: Be sure the day you select to install your building is dry and calm. Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Teamwork: Whenever possible, two or more people should work together to assemble your building. One person can position parts or panels while the other is able to handle the fasteners and the tools. Tools and Materials: These are some basic tools and materials you will need for the construction of you
Resumo do conteúdo contido na página número 4
SAFETY FIRST.... A4 Safety precautions are important to follow throughout the construction of your building. ,Care must be taken when handling various ,Practice caution with the tools being used in the pieces of your building since some contain assembly of this building. Be familiar with the sharp edges. Please wear work gloves, eye operation of all 3ower tools. protection and long sleeves when assembling or performing any maintenance on your build- ing. sM_ty edge sharp edge sharpedge satiety e
Resumo do conteúdo contido na página número 5
CARE & MAINTENANCE.... A5 Web Finish: For long lasting finish, periodically clean and wax the exterior surface. Touch- up scratches as soon as you notice them on your unit. Immediately clean the area with a wire brush; wash it and apply touch-up paint per manufacturer's recommendation. Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom. Heavy amounts of snow on roof can damage building making it unsafe to enter. In snow country, Roof Strengthening Kits are available
Resumo do conteúdo contido na página número 6
ACCESSORIES.... A6 V_ EB FLOOR FRAME KITS ROOF STRENGTHENING _- __r- (heavy snow load) KITS _ Extra roof beams and gable braces _[_1 designedforaddedprotectionagainst ?t lll t u,,,'llll I t t1II1 heaW snow accumulation. Increases _,_._ _ I!1!1 the strength of your roof by 50% _'_-"_'_-)_ ANCHOR KITS Model No. AK4 MODELS FB47410, FB5465, FB106-A FB109-A and FB1014-A Anchor Kit contains heavy-duty steel augers, 60' (18m) of steel cable and 4 cable A simple new floor frame system made of heavy-dut
Resumo do conteúdo contido na página número 7
THIS PAGE WAS LEFT BLANK INTENTIONALLY 7
Resumo do conteúdo contido na página número 8
THIS PAGE WAS LEFT BLANK INTENTIONALLY
Resumo do conteúdo contido na página número 9
Foundation S09 The Foundation For Your Building OPTION 1: ARROW FLOOR FRAME KIT: (order No.FB109-A or SR68385-A) Arrow has the best base for your building in this simple kit. It keeps stored items above the ground. This kit should be used with one of the following: A. To support a plywood deck B. To be filled with sand. We recommend the combined use of f. an ARROW FLOOR FRAME KIT and 2. an ARROW ANCHORING KIT as an effective method of securing the building to the ground. Allow I - 2 hours for co
Resumo do conteúdo contido na página número 10
Anchoring _\ll) it is important that the entire floor frame be anchored after the building is erected. Below are recommended ways of anchoring. Arrow Anchoring Kit: (Model No. AK4 or 60298) Anchoring into Wood/Post: Recommended for use with any suggested base. Use 1/4" Wood Screws. There are 1/4" (0,83cm) dia. Contains: 4 Anchors with Cable, Clamps and holes provided in the frames for proper anchoring. installation instruction. 1. J" OVER THE BEAMS AND INTO THE GROUND Arrow Anchoring Kit: (Model
Resumo do conteúdo contido na página número 11
Hardware SII Remove from bag of screws and save for the last step T T T 65900A 65103 #10Bxl/2" Black Screw(8) 65923 65004 #8-32 Hex Nnt (165} (Packed with Screws) #8=32×3/8" Bolt (165) #8Ax5/16" Screw (336} 66646 65109 67468 66045 Washer(361 ) #8-32 Acorn Nut (4) Peak Cap (2) Handle (2) (10 sheets of 40) (Packed with Screws) (Arrow Logo) 66183 66769 66382 Roof Trim Cap 6228 Door Slide (4) Lower Door Guide (4) (2 right & 2 left) Track Support (2) 5971 67545 Roof Beam Bracket (4) Weather Stripping
Resumo do conteúdo contido na página número 12
Parts List LINI2 Part Part Check Assembly Quantity Number in Carton List Key No. Description 1 3719 Door Handle Brace 2 2 5986 2 Rear Wall Angle 3 6000 2 Right Gable 4 6001 Left Gable 2 5 6015 Side Roof Trim 4 6 10497 Horizontal Door Brace 4 7 9355 Vertical Door Brace 2 8 6403 1 Door Track Splice 9 9156 Corner Panel 4 10 8995 Wall Panel 8 11 6529 Roof Panel 4 12 6635 Gable Brace 2 13 6640 2 Right Roof Panel 14 6641 Left Roof Panel 2 15 6869 2 Ridge Cap 16 9917 Rear Wall Channel 2 17 10489 1 Righ
Resumo do conteúdo contido na página número 13
Assembly by Key No. sI; 1 3 I g 2 ,=22 4 2 14 II lo.. 4 2O 13
Resumo do conteúdo contido na página número 14
08934 Ramp (1) C_,d.._. t ® Parts Needed For O • 9367FrontFloorFrame(2) _1 _V= I Floor Frame Assemblies ®8936 Rear F_oor Frame (2) • 9299 Side Floor Frame (4) $14 The front floor frame is made up of three pieces. The side floor frames and the rear floor frame are made up of two pieces. The holes in these pieces will align when the pieces are positioned with correct amount of 9367 overlap. The illustrations below show the proper overall length for the sides, rear and front. Proceed as follows: 92
Resumo do conteúdo contido na página número 15
O 5988 Rear Wall Angle (2) tpC"e- e Needed e .99 7Rea Wa,,C,anne, 2) Frame Assemblies o 9923 S_de wa.C.anne_ (4) • 9298 Side Wall Angle (4) SIS The main frame pieces reinforce the RearWall Channel 9917 walls. These pieces will later be in- 118 1/8" 3,0m stalled in the center and at the top 9917 edge of the side walls and the rear wall. Proceed as follows: 1 Overlap the rear wall channel pieces as shown in the figure and Side Wall Channels fasten the two pieces together with 111 5/8" 2,8m 9923 o
Resumo do conteúdo contido na página número 16
® Parts Needed For O • 9294 Right Roof Beam (4) • 9295 Left Roof Beam (4) Step 3 Roof Beam Assemblies S_6 The roof beams join the two gables and support the roof panels. The main roof beam is made up of four pieces overlapped, back to back at the cen- ter. The left and right roof beam as- semblies are made up of two pieces. 9295 __, Hint: These pieces are force-fitted, How.To Hentify Left and "_'_... _'_ Right so you may have to press hard to join Right Roof Beams "-_.:...._.... o;_ them togethe
Resumo do conteúdo contido na página número 17
® Parts Needed For ® o 6403DoorTrackSplice(1) Step 4 #oor Track Assembly .e3e6DoorTrack(2) AI7 NOTE: Door Track Splice (painted part) The door track assembly supports the sliding doors and reinforces the front wall. Iris made up of three pieces. 64O3 1 Using the door track splice, (painted), join the door track (galvanized) pieces end-to-end as shown. 2 Insert four screws from the under- side only. Hint: The holes in the top side of the door track assembly are for fastening the gable to the top
Resumo do conteúdo contido na página número 18
• Front Floor Assembly (1) Q Parts Needed For e • Side Floor Assembly (2) Step 5 Floor Frame • Rear Floor Assembly (1) "1 Assemble the four corners of the floor frame using two screws at each corner as shown. At the front corners fasten bolts through from the bottom with nuts on top. 2 Measure the floor frame diago- When Diagonal Measurements nally. When the diagonal measure- are Equal the Floor Frame ments are equal, the floor frame is is Square. square. NOTE If using a wood platform or concret
Resumo do conteúdo contido na página número 19
® Parts Needed For ® ® 8995 Wall Panel (2) • 9372 Front Wall Panel (2) Step 6 Corners Q 9156 Corner Panel (4) UNI9 NOTE Narrow The remainder of the building assembly requires many hours and more than one person. Do not continue beyond this point Wide Side if you do not have enough time to com- plete the assembly today. A partially assembled building can be severely damaged by light winds. Each screw and bolt in the wall re- quires a washer. "1 Position a corner panel at the corner of the floor f
Resumo do conteúdo contido na página número 20
0 Door Track Assembly (1) O Parts Needed For O ORearWallAngleAssembly (1) St p 7 , Side Wail Angle Assemb,ies (2) e Frames • Rear Wall Channel Assembly (1) s2o O Side Wall Channel Assemblies (2) The main frame pieces give rigidity to the side walls and provide a surface for attaching the gables which sup- port the roof. 1 Fasten the rear wall angle as- sembly across the inside top of the rear wall using screws. 2 Fasten the rear wall channel as- sembly across the middle of the rear wall using sc
