Resumo do conteúdo contido na página número 1
OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW TREADMILL!
Resumo do conteúdo contido na página número 2
Table of Contents Product Registration ..2 Important Safety Instructions .. 3 Important Electrical Information .. 4 Important Operation Instructions . 5 Assembly Instructions 6 Folding & Transport Instructions .. 9 Operation of Your New Treadmill .10 Target Heart Rate .. 20 Using a Heart Rate Transmitter 21 Heart Rate Control Operation .. 22 General Maintenance. .. 23 Service Checklist - Diagnosis Guide .. 26 Manufacturer s Limited Warranty . 27 XT175 / XT275 1
Resumo do conteúdo contido na página número 3
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SPIRIT FAMILY! Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit will do all we can to make your ownership experience as pleasant as possible for many years to come. The local dealership where you purchased this tread
Resumo do conteúdo contido na página número 4
Important Safety Instructions WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet. DO NOT USE AN EXTENSION CORD UNLESS IT IS 14AWG OR BETTER, WITH ONLY ONE OUTLET ON T
Resumo do conteúdo contido na página número 5
Important Electrical Information WARNING! NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Large switching currents of the drive motor will trip GFCI type outlets, as will any appliance with a large motor. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels. NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or more, the performance of your trea
Resumo do conteúdo contido na página número 6
Important Operating Instructions NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually. NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that could damage treadm
Resumo do conteúdo contido na página número 7
Assembly Pack Check List (XT175 / XT275) 5/16 x 19 x 1.5T Curved Washer (4 pcs) M5 x 15 m/m 5/16 x15m/m Button Head Socket Bolt (14 pcs) Phillips Head Screw (6 pcs) Lubricant (1pc) Safety Key (1pc) Combination M5 Allen Wrench M6 Allen Wrench (1pc) & Phillips Head Screwdriver (1 pc) XT175 / XT275 6
Resumo do conteúdo contido na página número 8
!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS. PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!! Serious injury could occur if this folding treadmill is not unpacked properly. There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding accidentally during shipping. If this strap is not removed properly the treadmill could spring open unexpectedly and cause injury if someone is standing near the treadmill when the strap is removed. To ensure your per
Resumo do conteúdo contido na página número 9
Assembly Instructions (XT175 / XT275) XT175 / XT275 8
Resumo do conteúdo contido na página número 10
Folding Instructions Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired position. To Fold The Treadmill: Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is secured by the locking telescoping tube assembly in center back of base. To Unfold The Treadmill: Apply slight forward pressure* on the treadmill running d
Resumo do conteúdo contido na página número 11
Operation of Your Treadmill Getting familiar with the control panel XT175 Console GETTING STARTED: Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will not operate without it. When the power is initially turned on, the display will light up and show ODO in the center of the display and a number in the Distance window. This is
Resumo do conteúdo contido na página número 12
WINDOW DISPLAYS: DISTANCE: Accumulates total workout distance from 0.00 to 99.99 miles (km). TIME: Accumulates total workout time from 00:00 to 99:59. CALORIES: Accumulates the users calorie consumption during exercise. Max. Value is 999.9 calories. SPEED: Displays the current running speed from 0.5 mph 10 mph. PULSE: Displays your current heart rate in beats per minute during workout. INCLINE: Displays your current workout elevation from 0 to 10. PRGM/LAPS: Initially sho
Resumo do conteúdo contido na página número 13
RAPID INCLINE KEYS: 5 preset buttons for rapid incline: 2, 4, 6, 8, 10. You can press the 5 buttons, mentioned above, at any time during a program and the treadmill will automatically adjust to the preset elevation. PROGRAMS: MANUAL P0 Step 1. Press the Program up/down button to select Manual P0 then press enter. Step 2. The Time window will now be blinking 00:00. You now have a choice to set one of three parameters as a target; either Time, Distance or Calories. When you set one of these targ
Resumo do conteúdo contido na página número 14
speed and incline buttons. You can press STOP button any time during the program to Pause the program. Pressing the Stop button twice will end the program. *During the program you can press the Select button next to the display window to switch the display between the Speed and Incline profiles. USER U1~U2 Step 1. Press program up/down buttons to select User 1 or User 2, then press enter. Step 2. The Time window will be blinking 20:00. You can adjust the Time by pressing the FAST/SLOW buttons, t
Resumo do conteúdo contido na página número 15
SPEED PROFILE INCLINE PROFILE P1 SPEED PROFILE P1 INCLINE PROFILE P2 SPEED PROFILE P2 INCLINE PROFILE P3 SPEED PROFILE P3 INCLINE PROFILE P4 SPEED PROFILE P4 INCLINE PROFILE P5 SPEED PROFILE P5 INCLINE PROFILE XT175 / XT275 14
Resumo do conteúdo contido na página número 16
XT275 Console Getting started: Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will not operate without it. When the power is turned on, a message will scroll across the dot matrix showing the current software version. Then the Time and Distance windows will display Odometer readings for a short time, Time window will show how
Resumo do conteúdo contido na página número 17
Pause/Stop/Reset Feature: STEP 1: When the treadmill is running the pause feature may be utilized by pressing the red Stop key once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent. The Time, Distance and Calorie readings will hold while the unit is in the pause mode. After 5 minutes the display will reset and return to the start up screen. STEP 2: To resume your exercise, when in Pause mode, press the Start key. The speed and incline will return to thei
Resumo do conteúdo contido na página número 18
Pulse Grip Feature: The Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout. You must use both stainless steel sensors on the front cross bar to display your pulse or the wireless chest strap. Pulse value displays anytime the upper display is receiving a Pulse signal. Calorie Display: Displays the cumulative calories burned at any given time during your workout. Note: This is only a rough guide used for comparison of different exercise se
Resumo do conteúdo contido na página número 19
Programmable Features Factory preset programs (P1~P5), 2 user defined programs, and one Manual program. Each preset program has a maximum speed level that is displayed when a desired workout is chosen. The maximum speed that the particular program will achieve will be displayed in the Speed window. Also included are two user programs (User 1 and User 2) for custom workouts. To Select a Program: STEP 1: Press the PROGRAM key to select desired program. Press enter to select the program. The displ
Resumo do conteúdo contido na página número 20
STEP 5: The first column (segment) will now be blinking. Using the Fast / Slow or rapid keys, adjust the speed level to your desired effort for the first segment then press enter. The second column will now be blinking. Repeat the above process until all segments have been programmed. The first column will be blinking again. This is for the incline programming. Repeat the above process to program all segments for incline. STEP 6: Press the Start button to begin the workout and also save the prog
