Manual do usuário Carlisle SynTec

Resumo do conteúdo contido na página número 1

Mini CC Burner Instruction Sheet
The Mini CC Burner uses propane, natural gas, or hydrogen with oxygen to create a wide range of flame
characteristics for flameworking applications. This instruction sheet is designed to provide the user
with a working knowledge of the burner to allow for safe and educated use. This instruction sheet is
not intended to be a guide for flameworking, but rather a guide for use of the Mini CC Burner. Please
take the time to thoroughly read through this instru

Resumo do conteúdo contido na página número 2

Control Valves: Standard models require two valves which are, located on the back of the Mini CC Burner. One control valve has a red handle and is used for metering the gas flow to the burner. One control valve has a green handle and is used for metering the oxygen flow to of the burner. These control valves are finely threaded and thus require several full turns to become fully open or fully closed. When using these valves to control the flames, it is best to make small incremental

Resumo do conteúdo contido na página número 3

Startup and Shutdown: To startup the Mini CC Burner, follow the procedure below. 1. First open the gas control valve and ignite the gas with either an open flame or a striker. Be sure that your hands, clothing, and other flammable objects are not near the face of the burner while igniting the flame. 2. Then open the oxygen control valve to produce a blue focused flame. To shutdown the Mini CC Burner, follow the procedure below. 1. Reduce flow of all gases to burner 2. First close

Resumo do conteúdo contido na página número 4

Flame Atmospheres: The Mini CC has a very unique flame. Please note that based on the operator’s prior burner experience, the flame settings may not look or sound as expected. The unique flame properties of the torch demonstrate superior performance. Refer to the illustrations below to achieve the desired flame atmospheres. Neutral Reducing Oxidizing Soft Glass: (COE 90 and higher) For

Resumo do conteúdo contido na página número 5

Safety Requirements: Below are the safety requirements for use of the Mini CC Burner. These measures will help to ensure the safety of the user. • Flashback Arrestors should be used with the Mini CC Burner. These devices stop a Flashback from traveling upstream through the lines. • Didydium Glasses should be worn at all times, when working with the Mini CC Burner. • Protective gloves or clothing should be worn when working with the Mini CC Burner. • Long hair should be tied back a