Resumo do conteúdo contido na página número 1
™
Twain Ceiling Fan Owner’s Manual
Congratulations on your purchase of a Casablanca ceiling fan!
Your new fan will be a beautiful addition to your home, keeping you comfortable throughout
the year. The true appreciation of a Casablanca ceiling fan is only complete when put
into actual use. Great time and care have been taken to construct and enhance what are
otherwise functional appliances. Beauty is found in the integrity, craftsmanship, and attention
to detail. Thank you for looking for
Resumo do conteúdo contido na página número 2
™ Twain PLEASE INSPECT ALL PACKAGING PRIOR TO DISCARDING! Your Casablanca fan was crafted with pride and care and inspected thoroughly prior to shipment. Before you begin to assemble and install your Casablanca fan, remove all parts from the carton and check them against the Parts Guide in this manual. Make sure all parts are included in the box • Always turn power to the ceiling fan OFF before using the Parts Guide on the following pages. replacing lightbulbs or working on your fan. If the
Resumo do conteúdo contido na página número 3
™ Twain Parts Guide Item # Description Picture (not to scale) Quantity 1. Motor Housing 1 2. Crossbar Mounting Bracket 1 3. Right-Angle Screwdriver 1 4. Lag Screw and Washer 1 5. 1" x 8-32 Round-Head Screws and Washers 2 6. Canopy and Hatch 1 7. 2½" x 8-32 Canopy Screws and Lock Washers 5 8. 2 ¼ " P e r m a • L o c k ™ D o w nr o d an d B a l l A s s e m b l y 1 9. Allen Wrench 1 10. Wire Nuts 4 11. Light Fixture 1 12. Light Fixture Screws 4 13. Halogen Downlight Bulbs, 50W 2 14. Blades 5 15. Bl
Resumo do conteúdo contido na página número 4
™ Twain Item # Description Picture (not to scale) Quantity 16. Blade Iron Plates 5 17. Blade Irons 5 18. Blade Iron Screws 11 19. Balance Kit 1 20. Light Adapter Plate 1 21. Light Adapter Screws 3 22. Incandescent Uplight Bulbs, 25W 6 23. Glass Shade 1 24. Finial 1 25. W-81 Wall Control 1 4
Resumo do conteúdo contido na página número 5
™ Twain Product Specifications ® Model name: Twain This device complies with Part 15 of the FCC rules. Model number: C25GXXXF Operation is subject to the following two conditions: ETL Rating: Damp • This device may not cause harmful interference. Dimensions: • This device must accept any interference received, including interference that may cause undesired operation. A = 11.9" This equipment has been tested and found to comply with B = 16.7" NOTE: Dimension the limits for a class B digit
Resumo do conteúdo contido na página número 6
™ Twain Safety Considerations Fuse Box Circuit Breaker (Remove fuse for the (Trip breaker for the circuit you will be circuit you will be Safety and the proper operation of your Casablanca working on) working on) fan both require a thorough knowledge of the product and proper installation; therefore, before attempting to install and operate your Casablanca fan, read this Owner’s Manual completely and carefully. Retain this manual for future reference. Ñ CAUTION: RISK OF ELECTRICAL SHOCK!
Resumo do conteúdo contido na página número 7
™ Twain Mounting Guidelines Structural Support Installing a New Ceiling Fixture Outlet Box Before mounting your Casablanca fan, read the following helpful recommendations. Location, If you do not have an existing fixture located where fan size, and structural support are important you wish to place your Casablanca fan, an approved factors to consider before installation. ceiling fixture outlet box must be installed and wired. Using Existing Ceiling Fixture Outlet Box Location After tur
Resumo do conteúdo contido na página número 8
™ Twain Suggested Extension Downrod Lengths Sloped Ceiling Installations Ceiling Height Downrod Length When to Use an Extension Downrod 8' 0" standard For optimum performance and appearance, use 8' 6" standard an extension downrod with your Casablanca 9' 0" 6" fan when installing on high (cathedral) ceilings 9' 6" 12" or sloped ceilings. Casablanca offers accessory 10' 0" 12" downrods in increments of 6" up to 5’. See your Authorized Casablanca Dealer for details. 11' 0" 18" 12' 0" 24" Calc
Resumo do conteúdo contido na página número 9
™ Twain Installing the Mounting Hardware Hardware (not to scale) Crossbar Mounting 1” x 8-32 Round-Head Screws Lag Screw and Washer (1) Right Angle Screwdriver Bracket (1) and Washers (2) Canopy Hatch (1) Canopy (1) 2½” x 8-32 Canopy Screws (4) and Lock Washers (5) STEPS 3-4 Assembling Joist 1 Determine the need for a lag screw based on the Mounting Guidelines previously described. If in doubt whether you need to install the lag screw, consult a qualified electrician. Ceiling wiring Ceilin
Resumo do conteúdo contido na página número 10
™ Twain STEP 5 4 To install the lag screw (if needed), slide the remaining washer onto the lag screw. Pass the lag screw through the center hole in the crossbar mounting bracket. Secure the lag screw into the guide hole, tightening until the ceiling fixture outlet box is firmly mounted to the support beam. Attaching the Canopy 5 To install the canopy hardware, set aside the canopy hatch and attach the canopy to the crossbar mounting bracket with three of the canopy screws and lock washer
Resumo do conteúdo contido na página número 11
™ Twain Installing the Fan Hardware (not to scale) Perma•Lock™ Downrod and 2½" x 8-32 Canopy Screw (1) Allen Wrench (1) Wire Nuts (4) Ball Assembly (1) and Lock Washer (1) Canopy Hatch (1) Canopy (1) Incandescent Uplight Bulbs, 25W (6) STEP 1 Assembling Paper motor shield 1 Remove the paper shield from the motor. 2 Examine the interior of the motor coupling. If STEP 2 the end of the set screw is inside the motor coupling Set screw - CORRECT PLACEMENT space, use the Allen wrench to loosen th
Resumo do conteúdo contido na página número 12
™ Twain STEPS 3-4 3 Route the fan wires through the downrod and ball assembly. Downrod and ball assembly 4 Insert the downrod into the motor coupling and turn clockwise. When the downrod is securely in place, re-tighten the set screw with the Allen wrench Tapered until it will not turn any further. Test the stability of Set screw thread the downrod assembly by attempting to unscrew the downrod from the motor coupling. If the downrod turns Allen Motor in either direction, the set scre
Resumo do conteúdo contido na página número 13
™ Twain STEP 8 Hanging the Fan 8 Hold the motor housing with both hands. Insert the ball of the downrod into the canopy opening. Check to ensure that the wires are not pinched. Rotate Ball the motor housing until the slot in the downrod ball locks into the pin opposite the canopy opening. Slot Pin Connecting the Wires STEPS 9-10 9 Trim the extra length from the motor wires. Be certain to leave at least 6 inches of wire above the RED and downrod. Use a wire stripper (not included) to strip
Resumo do conteúdo contido na página número 14
™ Twain Installing the W-81 Wall Control Hardware (not to scale) W-81 Wall Control Wall Plate (2 colors included) Wall Control (1) Wire Nuts (4) (assembled) Wall Plate Switch Box Screws (4) Screws (2) The fan must be supplied with three independent 120V AC wires to provide power for the fan, light, and neutral. Ñ CAUTION: Ensure power is turned OFF at the breaker or fuse panel before beginning wall control installation. NOTE: The W-81 wall control is designed to replace a standard wall sw
Resumo do conteúdo contido na página número 15
™ Twain STEP 3 3 To attach the wires in the wall box to the W-81 wall control wires, match the wire colors as described below, hold the bare ends of the wires side by side, and fully insert the wires into the wire nut. Secure by rotating the wire nut in a clockwise motion. Connect wires in the following order: • GREEN GROUND conductor from the wall box to the GREEN wire from wall control (labeled GRD) • BLACK wire from fan in the wall box to YELLOW wire on wall control (labeled FAN) •
Resumo do conteúdo contido na página número 16
™ Twain STEP 5 5 Fasten one of the two wall plates (white or ivory) to the wall control using the two wall plate screws. 6 Set the fan speed to HIGH on the wall control. Return power to the panel and test the controller. Wall plate Ñ CAUTION: Failure to set the fan speed to screws (2) HIGH can result in faulty operation of the fan and damage to the wall control. Operating the W-81 Wall Control • Turn the upper knob to the desired fan speed. • Turn the lower knob to the desired light se
Resumo do conteúdo contido na página número 17
™ Twain Installing the Blades Hardware (not to scale) Blade Iron Plate Blades (5) Blade Iron Plates (5) Blade Irons (5) Screws (21) Blade Iron Screws (11) STEP 1 Assembling NO DRILL Fan blade assembly 1 Place the blade iron plate on top of the blade and the blade iron underneath the blade. Use a manual screwdriver to secure the blade iron and plate with the blade iron plate screws. Use four screws per blade. Repeat this process for each fan blade. Ñ CAUTION: Do not use an electric screwdri
Resumo do conteúdo contido na página número 18
™ Twain Installing the Light Fixture Hardware (not to scale) Light Adapter Plate (1) Light Adapter Screws (3) Light Fixture Screws (4) Halogen Downlight Bulbs, 50W (2) Glass Shade (1) Finial (1) Light Fixture (1) STEPS 2-3 Attaching the Light Fixture 1 Before getting started, remove the rubberband from the plug connector. 2 Install two of the three light adapter screws into the light adapter plate. Thread the plug connector through the hole in the center of the light adapter plate. 3 Align th
Resumo do conteúdo contido na página número 19
™ Twain STEP 5 5 Align the light fixture to the four posts on the light adapter plate using the light fixture screws. Light fixture Posts (4) Light fixture screws (4) Attaching the Halogen Bulbs STEP 6 NOTE: Do not remove the protective sleeve on the halogen bulb. Touching the glass casing of the bulb may damage or break the glass. 6 Cut the sleeve to expose the connection end of the bulb. Continue to hold the bulb by the sleeve during installation. Screw both halogen bulbs into the light
Resumo do conteúdo contido na página número 20
™ Twain STEP 7 Attaching the Glass Shade 7 Insert the threaded rod from the light assembly through the hole in the center of the glass shade. Threaded rod Glass Shade Finial STEP 8 8 Thread both pieces of the finial onto the threaded rod. Screw the finial into place securely. Installed fan and light fixture 20
