Resumo do conteúdo contido na página número 1
DO NOT
DISCARD
Installer’s Guide
Installation and Operation
Model:
Dakota 42-CE
0087
CAUTION
DO NOT DISCARD THIS MANUAL
• Important operating
• Read, understand • Leave this manual with
and maintenance
and follow these party responsible for
instructions included.
instructions for safe use and operation.
installation and
operation.
WARNING
WARNING
HOT SURFACES!
If the information in these instruc-
Glass and other surfaces are hot during
tions is not followed exactly, a
operation and cool
Resumo do conteúdo contido na página número 2
Read this manual before installing or operating this fi replace. Please retain this owner’s manual for future reference. Congratulations Congratulations on selecting a Heat & Glo LifeStyle Collec- This owner’s manual should be retained for future reference. tion gas fi replace—an elegant and clean alternative to wood We suggest you keep it with your other important documents burning fi replaces. The Heat & Glo LifeStyle Collection gas and product manuals. fi replace you have selected is designed t
Resumo do conteúdo contido na página número 3
Table of Contents 1 Listing and Code Approvals 4 9 Fireplace Setup 13 A. Fireplace Certifi cation . . . . . . . . . . . . . . . . . . . . . . . . . 4 A. Clean the Fireplace . . . . . . . . . . . . . . . . . . . . . . . . . . 13 B. Grate Assembly Placement . . . . . . . . . . . . . . . . . . . . 13 2 Getting Started 4 C. Positioning the Logs . . . . . . . . . . . . . . . . . . . . . . . 13 A. Design and Installation Considerations . . . . . . . . . . . . 4 D. Glass Assembly . . . . . . . .
Resumo do conteúdo contido na página número 4
Listing and Code Approvals 1 1 A. Fireplace Certifi cation MODEL: Dakota 42-CE WARNING LABORATORY: Advantica Do NOT use this fi replace if any part has been under TYPE: Outdoor Gas Fireplace water. Immediately call a qualifi ed service technician STANDARD: BS EN 509•2000 & EN 14543 Sept. 2002 to inspect the fi replace and to replace any part of the control system and any gas control which has been DIRECTIVE: GAD 90/1396/EEC under water. Getting Started 2 2 A. Design and Insta
Resumo do conteúdo contido na página número 5
Framing and Clearances 3 3 Note: WARNING • Illustrations refl ect typical installations and are FOR DESIGN PURPOSES ONLY. Fire Risk • Illustrations/diagrams are not drawn to scale. Provide adequate clearance: • Actual installation may vary due to individual design • Around air openings. preference. • To combustibles. • For service access. A. Select Fireplace Location Locate fi replace away from traffi c areas. When selecting a location for your fi replace it is important to consider the require
Resumo do conteúdo contido na página número 6
Mantel B. Clearances • Appliance must be installed in amply insulated area. • Area must have minimum of 25% of surface area open. • Surface area = sum of walls surface. 111.4 cm Header height. 111.4 cm Use only non-combustible material below the top of 124.5 cm the top standoffs. 61.3 cm Upper front can be covered with non-combustible material 3.8 cm or removed and replaced with non-combustible material. 0 cm to level 213.4 cm of standoffs to ceiling 3.8 cm 1.3 cm Drywall 0 cm Combustible flo
Resumo do conteúdo contido na página número 7
Fireplace Locations 4 4 A. Fireplace Minimum Clearances O P G N R FP FP A H D Q E (See Note 2) B L B FP B FP F M FP FP I X FP A J or K X = FIREPLACE OPENING = AIR SUPPLY INLET = AREA WHERE FIREPLACE IS NOT PERMITTED FP A = 0 cm . . . . . . . . . clearances above grade, J = 22.8 cm . . . . . clearance to non-mechanical air supply inlet to building or the (See note 1) veranda, porch, deck or combustion air inlet to any other balcony. appliance. B = 30.5 cm . . . . . . .
Resumo do conteúdo contido na página número 8
NAILING TABS Fireplace Preparation 5 5 B. Securing and Leveling Fireplace CAUTION WARNING Sharp Edges • Wear protective gloves Fire Risk and safety glasses during • Prevent contact with sagging, loose installation. insulation. • Do NOT install against vapor barriers or exposed insulation. A. Remove Logs and Shipping Cover The diagram shows how to properly position, level, and se- Open the doors by sliding the handles toward the outside cure the fi replace (see Figure 5.2). Nailing tabs ar
Resumo do conteúdo contido na página número 9
Gas Information 6 6 A. Gas Pressure Requirements B. Gas Connection Pressure requirements for Heat & Glo gas fi replaces are Note: Have the gas supply line installed in accordance shown in Table 1 below. with local building codes by a qualified installer Two taps are provided on the outlet side of the gas control approved and/or licensed as required by the locality. for a test gauge connection to measure the inlet and outlet pressures. These inlet and outlet pressure taps can be ac- Note:
Resumo do conteúdo contido na página número 10
Electrical Information 7 7 A. Ignition System Wiring • This fi replace is equipped with an electronic ignition WARNING system which operates on a 6 volt system. • The batteries are located within the ignition module which Shock Risk is located within the external control box. A wiring diagram • Replace damaged wire with type 105° C rated wire. is shown in Figure 7.1. • Wire must have high temperature insulation. • The battery pack requires four AA batteries (not included). See Section 11
Resumo do conteúdo contido na página número 11
Mantel Finishing 8 8 A. Mantel Projections Figure 8.1 shows the minimum vertical dimension of fi replace mantels or other combustible projections above the top front edge of the fi replace. Overhang 30.5 cm max. combustible 2.13 m mantel depth minimum ceiling height B A Then B must be at If A is: least: cm 15.2 - 91.4 66 cm 91.4 or more 45.7 Figure 8.1 Clearances to Combustible Mantels or other Combustibles above Fireplace. Heat & Glo Lifestyle Collection • Dakota 42-CE • 4036-915 Rev I • 11
Resumo do conteúdo contido na página número 12
B. Facing Material WARNING WARNING Fire Risk Fire Risk Do NOT obstruct air inlet or outlet grilles. Finish all edges and fronts to clearances and specifi cations listed in manual. Do NOT modify grilles. • Modifying or covering grilles could cause • Metal fireplace front may be covered with non- temperature rise and fi re hazard. combustible material only. Finishing materials must not interfere with: • Do NOT overlap combustible materials onto fi replace • Air fl ow through grilles or louvers. fro
Resumo do conteúdo contido na página número 13
Fireplace Setup 9 9 A. Clean the Fireplace Note: Use only manufacturer’s supplied media for fuel Clean/vacuum any sawdust that may have accumulated in- bed layout. side the fi rebox or underneath in the control cavity. B. Grate Assembly Placement Back Legs in Grate Brackets Back Legs in Grate Brackets Figure 9.2 Top view Figure 9.1 Back Legs in Grate Brackets (front view) Ensure grate assembly is over burner assembly, centered from left to right, and back legs are in grate brackets. C. Positio
Resumo do conteúdo contido na página número 14
Figure 9.7 Left Side Log (SRV723) (front view) Figure 9.8 Top view Place the fork of log onto the left front bar and rest its back on right rear log. Figure 9.9 Front Log (SRV727) (front view) Figure 9.10 Top view Place front log in front of the main grate with its left end resting on left rear log as shown. Figure 9.11 Front Left Log (SRV722) (front view) Figure 9.12 Top view Place front left log between locating bars so it rests against left side log and on top of front log. 14 Heat & Glo Lif
Resumo do conteúdo contido na página número 15
Figure 9.14 Top view Figure 9.13 Front Right Log (SRV724) (front view) Place right center log between the 4th and 5th vertical bars on the log grate, resting the back on right rear log. Figure 9.16 Top view Figure 9.15 Right Side Log (SRV740) (front view) Place right log against the rightmost front grate bar and rest its rear on right rear log, angled towards the corner as shown. Figure 9.18 Top view Figure 9.17 Right Front Corner Log (SRV742) (front view) Place right front corner log bet
Resumo do conteúdo contido na página número 16
D. Glass Assembly E. Placing Lava Rock • After logs have been placed spread part of the lava rock (included) between the rock pan and ashlip (see WARNING Figure 9.19). Handle glass with care. • Inspect the glass for cracks, chips or Rock Pan scratches. • Do NOT strike, slam or scratch glass. Ashlip • Do NOT operate fi replace with glass door removed, cracked, broken or scratched. • Replace glass door assembly as a complete assembly. • The glass doors are included with and pre-installed in th
Resumo do conteúdo contido na página número 17
Operating Instructions 1 10 0 A. Before Lighting Fireplace WARNING Before operating this fi replace, have a qualifi ed Improper installation, adjustment, alteration, service or technician: maintenance can cause injury or property damage. Refer • Remove all shipping materials from inside the fi rebox. to the owner’s information manual provided with this • Review proper placement of logs and lava rock. fi replace. For assistance or additional information consult a qualifi ed installer, service
Resumo do conteúdo contido na página número 18
B. Lighting the Fireplace Electronic Ignition FOR YOUR SAFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS WARNING: If you do not follow these instructions 1. This fireplace is equipped with an exactly, a fi re or explosion may result causing property ignition device which automatically damage, personal injury or loss of life. lights the burner. Do not try to light A. This fi replace is equipped with • Do not touch any electric switch; do the burner by hand. an electronic pilot ignition devic
Resumo do conteúdo contido na página número 19
C. After the Fireplace is Lit CAUTION Initial Break-in Procedure When you light the fi replace, you may notice that it produces • Prevent accidental fi replace operation when not heat which does have an associated odor or smell. If you attended. feel this odor is excessive it may require the initial three to • Unplug or remove batteries from remote switch if four hour continuous burn on high followed by a second burn absent or if fi replace will not be used for an extended up to 12 hours to
Resumo do conteúdo contido na página número 20
Maintaining and Servicing the Fireplace 1 11 1 Although the frequency of fi replace servicing and maintenance will depend on use and the type of installation, a qualifi ed service technician should perform an fi replace check-up at the beginning of each heating season. Debris from any outside source and/or soot must be removed from the fi eplace. Allow logs to cool, remove if necessary, vacuum and replace in accordance with instructions on pages 13-15. WARNING CAUTION Risk of injury or property
