Resumo do conteúdo contido na página número 1
Product features and decoration may vary from the picture above.
JEEP and the Jeep grille design are registered trademarks of DaimlerChrysler Corporation and are used under license.
©DaimlerChrysler Corporation
Goodyear (and winged foot design) and Wrangler (for tires) are trademarks
of The Goodyear Tire & Rubber Company, used with permission.
Fisher-Price, Power Wheels by Fisher-Price, Power Lock and Power Stick are U.S. trademarks of Mattel, Inc.
Owner’s Manual with Assembly Instructions
Plea
Resumo do conteúdo contido na página número 2
Table of Contents A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 3
Warnings and Cautions B ELECTRICAL HAZARD WARNING • Batteries can fall out and injure a child if vehicle tips over. Always use battery clamp. • PREVENT FIRE - Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. - Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury. ® ® - Use of Power Wheels components in products other than Power Wheels vehicles could cause ov
Resumo do conteúdo contido na página número 4
Pb Parts C • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Windshield Hinge Pin - 2 Windshield Brack
Resumo do conteúdo contido na página número 5
Parts 1 1 1 /2" x /4" Machine Screw - 2 Dashboard Knob – 2 Hood Latch – 2 1 #8 x 1" Screw – 11 #8 x1 /4" Screw – 10 1 2 #10 x / " Screw – 2 #10 x 1" Screw – 5 Key Assembly Knob Plate 1 2 #6 x 1 / " Screw – 4 All Screws Shown .354 Cap Nut – 3* *For your convenience, an extra .354 cap nut Actual Size has been included. Windshield (Back Half) Vehicle Body Seat Windshield (Front Half) Steering Column Hood Dash Sport Bar Support - 2 Sport Bar Steering Wheel Sport Bar Bracket Set Not Shown: Label
Resumo do conteúdo contido na página número 6
Parts Diagram D 29 15 33 7 15 28 36 33 32 10 35 32 21 10 20 31 3 37 31 23 38 30 37 24 10 19 17 18 16 22 13 27 13 12 10 14 11 10 13 6 4 8 13 9 5 25 26 1 34 2 3 Note: Some parts shown are assembled on both sides of the vehicle. 6
Resumo do conteúdo contido na página número 7
Parts Diagram No. Part Quantity No. Part Quantity 1 Vehicle Body 1 20 Steering Wheel 1 2 Steering Column 1 21 Steering Wheel Cap 1 3 .354 Cap Nut 2 22 Seat 1 4 Hood Latch 2 23 Long Seat Belt Strap 1 5 12 Volt Battery 1 24 Short Seat Belt Strap 2 6 Battery Clamp Unit 1 25 Headlight Lens 2 7 Light Cover 2 26 Lens Guard 2 8 Taillight Lens 2 27 Hood 1 9 Taillight Housing 2 28 Windshield, Front 1 10 #8 x 1" Screw 11 29 Windshield, Back 1 11 Gas Cap 1 30 Sport Bar 1 12 Dash 1 31 Sport Bar Support 2 13
Resumo do conteúdo contido na página número 8
Battery Charging E ELECTRICAL HAZARD WARNING CAUTION • Batteries can fall out and injure a Use the charger in dry locations only. child if vehicle tips over. Always use battery clamp. • PREVENT FIRE About Thermal Fuses ® Your Power Wheels 12 volt battery is equipped with a - Never modify the electrical system. built-in thermal fuse. The thermal fuse is a self-resetting Alterations could cause a fire resulting safety device which automatically “trips” and shuts down in serious injury and could a
Resumo do conteúdo contido na página número 9
Battery Charging Assembly F WARNING Battery Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. Charger Connector IMPORTANT NOTE! Assemble the battery retainer unit to the dash of your vehicle before beginning assembly of your vehicle.The battery retainer unit must be
Resumo do conteúdo contido na página número 10
Assembly 2 4 Battery Clamp Unit Knobs Knob Plate • Snap the knobs into the knob plate. Note: Gently squeeze the tabs on the knobs together before inserting the knobs into the knob plate. • Insert two #10 x 1" screws through the holes in the battery clamp unit and into the pegs in the dash. Dash Knob Plate 5 Pocket 3 Dash Key Assembly Motor Microphone Harness Cord Connector T-End Wire Dash View Battery • Bend the end of the microphone cord sothat it forms a “T”. Battery Clamp Compartment • Insert
Resumo do conteúdo contido na página número 11
Assembly End of Steering Column 11 6 8 6 24 5 HI LO KC 30 HEAT COOL 25 12 16 Steering Rod 3 Cap Nut 4 13 Bottom View Dash View • Insert the end of the steering column through the hole in the steering rod. • Before applying labels to the dash, wipe the dash with a • Fit a cap nut onto the end of the steering column. clean, dry cloth to make sure it is free of dirt and oils. Make sure your hands are clean and dry. • While supporting the steering column, tap the cap nut with a hammer to secure it o
Resumo do conteúdo contido na página número 12
Assembly #8 x 1" Screws Steering Wheel Grille 10 12 Slots Steering Wheel Cap Tabs • Fit the steering wheel cap into the center of the steering • Fit the lens tabs on the back of a lens assembly into the wheel with the screw holes aligned. headlight slots in the grille. • Insert two #8 x 1" screws as shown. • Press firmly to snap the lens assembly into the grille. • Tighten the screws with a Phillips screwdriver. • Repeat this procedure to snap the other lens assembly Do not over-tighten. into t
Resumo do conteúdo contido na página número 13
Assembly Windshield Frame - Hood Front Half 16 14 Tabs Slots Slot Slot Tabs • Position the hood over the front of the vehicle body as shown. • Insert the tabs on the hood into the slots in the • Align the slots in the front half of the windshield frame vehicle body. with the tabs on the windshield brackets. • Close the hood. • Fit the front half of the windshield frame onto the windshield brackets as shown. #8 x 1" Screws #8 x 1" Screws 15 Windshield Windshield Hinge Pin Frame - Brackets 17 F
Resumo do conteúdo contido na página número 14
Assembly Short Seat T-Loop (Pull through slot) 1 1 Belt Strap #8 x 1 / " 4 #8 x 1 / " 4 19 18 Windshield Screws Screws Frame - Back Half Fastener End End T-Loops Slot Slots Seat Slot Windshield Frame - Slots Front Half • Turn the seat upside down. • Insert the fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the side of the seat belt with the fastener faces the outer edge of the seat. • Pull the short seat belt strap completely through the slo
Resumo do conteúdo contido na página número 15
Assembly 21 Seat 23 Sport Bar Bracket Seat Back Tabs Tabs Ring PUSH Sport Bar HERE Sport Bar Support 2 Slot Side Leg 1 • Using safety scissors, remove the sport bar brackets from the plastic connector. Dispose of the • With the seat at an angle, insert the tabs on the front plastic connector. edge of the seat into the slots in the foot-well wall . • Position the sport bar upright. • Push down firmly on the edge of the seat above each • Position a sport bar bracket onto one of the sport bar tab
Resumo do conteúdo contido na página número 16
Assembly TM KC Light Rack - Back Half 26 25 Slots Light Covers Tabs Housing 1 #6 x 1 /2" Screws Sport Bar TM KC Light Rack - Front Half • Align the four tabs on the inside of a light cover • Position the sport bar with the ends on a flat surface, with the four slots in one of the light housings on the as shown. TM KC light rack. (Make sure the light covers are TM • Fit and hold the front and back halves of the KC light positioned with the wide spaced tabs at the top.) TM rack against the sport
Resumo do conteúdo contido na página número 17
Assembly 28 29 Taillight Housing Rear Wheel Well Taillight Lens #8 x 1" Screws • Using safety scissors, remove the taillight lenses and the taillight housings from the plastic connectors. Dispose of the plastic connectors. • Face the rear of the vehicle. 1 1 • Fit a taillight lens inside a taillight housing. 1 /2" x /4" Screw • Position the taillight housing with lens against the vehicle body with the screw holes aligned, as shown. 1 1 • Insert a 1 /2" x /4" machine screw into the hole closest
Resumo do conteúdo contido na página número 18
Label Decoration G Proper label application will help to keep the labels looking 15 their best! When applying labels, keep the following guidelines in mind: 17 9 • Wash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. 22 • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, ru
Resumo do conteúdo contido na página número 19
Pb Pb Pb Battery Installation H Battery ® Battery Important Note: Use only a Power Wheels 12 volt battery. 3 Battery Clamp Use of any other battery will damage your vehicle. Make Compartment sure that you charge the battery for at least 18 hours using ® the enclosed Power Wheels 12 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never charge the battery longer than 30 hours. Failure to follow these instructio
Resumo do conteúdo contido na página número 20
Battery Care and Disposal I Disposal Care ® If a battery leak develops, avoid contact with the leaking • Your Power Wheels battery is a sealed lead-acid acid and place the damaged battery in a plastic bag. See battery. It must be recycled or disposed of in an information below for proper disposal. environmentally sound manner. If acid comes in contact with skin or eyes, flush with cool • Do not dispose of a lead-acid battery in your regular, water for at least 15 minutes and call a physician.
