Resumo do conteúdo contido na página número 1
®
EPSON
ATA/IDE
CD-ROM DRIVE
USER’S MANUAL
CMD-2260
6X CD-ROM Drive
Resumo do conteúdo contido na página número 2
FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE STATEMENT Class B Computing Device Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions
Resumo do conteúdo contido na página número 3
USER’S MANUAL FOR CMD-2260 6X ATA/IDE CD-ROM DRIVE UNIT TABLE OF CONTENTS 4 Laser Safety Information 5 Handling Precautions 6 Drive Parts and Functions 8 Hardware Installation 10 Software Installation 13 Device Driver Installation 14 MSCDEX.EXE Installation 15 Additional Installation Instructions 16 Product Features 17 Technical Support ® 17 Windows ‘95 Installation Notes 18 Technical Support Options 3 ATA/IDE Owner’s Manual
Resumo do conteúdo contido na página número 4
LASER SAFETY INFORMATION Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J in effect as of date of manufacture. Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous (1) radiation exposure. The drive is designed to be incorporated into a computer-based system or unit which has an enclosing cover. (2) It is not allowed to use the drive alone. User must not attempt to i
Resumo do conteúdo contido na página número 5
HANDLING PRECAUTIONS DISC HANDLING l Hold the disc by the edges. Do not touch the surface of the disc, especially the bottom of the disc. l To remove dust or finger prints, use a clean soft dry cloth. Do not use thinners or cleaners on the disc. l Do not write with a hard tip pen on the surface. direct sunlight. l Do not store the disc in a high temperature area or leave in a car under l Do not bend or drop the disc. DRIVE OPERATION To avoid errors: l Never push objects of any kind through the t
Resumo do conteúdo contido na página número 6
DRIVE PARTS AND FUNCTIONS FRONT PANEL 1. HEAD PHONE JACK Connects headphone, use 3.5mm stereo mini plug. 2. VOLUME Adjust audio output level. 3. BUSY INDICATOR Power on and drive ready/busy indicator. 4. DISC TRAY Accepts a CD-ROM disc. 5. REVERSE SELECT - Audio CD Function Only Manually steps backwards for track selection 6. PLAY/PAUSE 7. FORWARD SELECT - Audio CD Function Only Manually steps forwards for track selection 8. EJECT/LOAD BUTTON Load and unload the CD-ROM tray with a disc using thi
Resumo do conteúdo contido na página número 7
REAR PANEL 1. AUDIO OUT CONNECTOR Standard card connector pins 2. INTERFACE MODE SELECTOR A. CSEL (Cable Select) B. SLAVE (Factory Default) C. MASTER 3. 40 PIN IDE INTERFACE CONNECTOR Interface to connect to host computer 4. DC (IN) CONNECTOR 7 ATA/IDE Owner’s Manual
Resumo do conteúdo contido na página número 8
HARDWARE INSTALLATION SYSTEM REQUIREMENTS You need the following equipment to install your CD-ROM Drive: l IDE compatible sound card or IDE interface card l IBM PC/AT or compatible l 3.5” or 5.25” floppy drive l MS-DOS 6.0 or higher HARDWARE INSTALLATION Before installing the drive, be sure that you have turned off the computer, and the power cord is disconnected 1. Install the drive into a 5-l/4” bay using mounting screws. The drive can also 2. Select an expansion slot on the mother board to in
Resumo do conteúdo contido na página número 9
5. Connect the 40-pin drive interface and sound cable at the rear of the CD-ROM drive. To prevent an incorrect connection and possible system damage, place Pin 1 of the cable connector (red colored edge of the cable) to Pin 1 on the ATAPI drive connector. Do not force the cable and the connector. 6. The four pin audio cable must be connected from your CD-ROM to your sound card to enable the capability to play audio CD’s with your unit. 7. Connect the DC power cable from the PC’s power supply to
Resumo do conteúdo contido na página número 10
SOFTWARE INSTALLATION 1. Insert the installation disk into Drive A or Drive B. (Not required for Windows ‘95 installations - see page 20). 2. At the DOS prompt, type the drive letter where the disk is inserted, followed by a colon. Press ENTER 3. Type install and press ENTER. The following menu appears: 4. The next menu allows you to specify where the MS-DOS MSCDEX.EXE tile is located. The default selection is C:\DOS. Chose OK when you have completed your selections If there were no errors, the
Resumo do conteúdo contido na página número 11
6. The defaults provided by the program are: Verbose Mode: On ** ** These settings are utilized by the MSCDEX.EXE program. Complete documentation is available in your MS-DOS manual. It is suggested that you accept the default settings unless you have sound card or adapter documentation which require different settings. 7. Use the TAB key to move between fields and make selections, then chose SAVE IT and press ENTER. Your installation is now complete. 11 ATA/IDE Owner’s Manual 12 ** Memory Buffer
Resumo do conteúdo contido na página número 12
8. Your computer MUST now be rebooted for all changes to become effective. 12 ATA/IDE Owner’s Manual
Resumo do conteúdo contido na página número 13
DEVICE DRIVER INSTALLATION The Device Driver, EPSON. SYS, is described below. DEVICE=[drive:\][path\]EPSON.SYS /D:device-name /M: /P: /I: /V For example: DEVICE=C:\EPCDROM/EPSON.SYS /D:EPSON00l /M:S /P: 1F0s /I:14 /V . [drive:\][path\] specifies the drive and the path name in use. . /D: Specifies the device name that will be used in conjunction with the MSCDEX.EXE tile, so that the MSCDEX.EXE tile can find and communicate with the Device Driver. . [/M:S] Specifies the data transfer mode. The onl
Resumo do conteúdo contido na página número 14
MSCDEX.EXE INSTALLATION INSTRUCTIONS MSCDEX.EXE must be included in the AUTOEXEC.BAT tile. The MSCDEX.EXE will be invoked each time the system boots up. The syntax is as follows: C: \ \MSCDEX.EXE / D:/M: Example: C:DOS\MSCDEX.EXE /D:EPSON00l /M: 12 Path-filename The path where the MSCDEX.EXE tile is located. Device-name The same name that was used with the DEVICE DRIVER in the CONFIG.SYS tile. Specifies the number of sector buffers. The default i
Resumo do conteúdo contido na página número 15
Additional Installation Instructions Installing CD Audio Player For Windows If “CD Audio” is not available in your Windows Accessories Group “Media Player”, you must complete the following steps to install it: Go to “Control Panel” and then to “Drivers”; 1) If [MCI] CD Audio is not listed go to add; 2) Chose [MCI] CD Audio and install the file; 3) If [MCI] CD Audio was listed choose setup and your CD-ROM should be detected; 4) Exit Windows and then restart Windows; 5) Go to Media Player and choo
Resumo do conteúdo contido na página número 16
PRODUCT FEATURES CMD-2260 CMD-2240 SPECIFICATIONS CD-ROM DRIVE CD-ROM DRIVE Disc CD-ROM Mode 1, CD-DA, CD-I; CD-ROM Mode 1, CD-DA, CD-I; Applicable Disc CD-ROM XA Mode 2, Form 1 &2 CD-ROM XA Mode 2, Form 1 &2 12cm, 8cm 12cm, 8cm Disc Diameter Performance 900KB/sec Data Rate - Sustained 750KB/sec 2.7MB/sec ATAPI Mode 0 Data Rate - Burst 2.7MB/sec ATAPI Mode 0 5.2MB/sec ATAPI Mode 1 5.2MB/sec ATAPI Mode 1 8.3MB/sec ATAPI Mode 2 8.3MB/sec ATAPI Mode 2 11.1 MB/set ATAPI Mode 3 11.1 MB/set ATAPI Mode
Resumo do conteúdo contido na página número 17
Technical Support Check the table below for common problems and solutions. PROBLEM CORRECTIVE ACTION l When you play a CD there is There are several probable causes no image on the screen. for this problem. The disc might be an audio CD with no screen images. You could have inserted the disc upside down (with the label facing down instead of up). Also, the disc could be defective. l When you play a CD there is You may not have connected the no sound four pin sound cable from the CD to either you
Resumo do conteúdo contido na página número 18
Technical Support Options The following Technical Support options are available if you have questions or concerns: Call Epson Technical Support at 800-922-8911 On CompuServe, GO EPSON or contact us directly at 76004,1432 Using Test Directory Contained On Installation Disk These The test directory contained on your installation disk is for use as directed by technical support. programs provide information that will enable you to receive a quick solution to many common technical support problems.
