Resumo do conteúdo contido na página número 1
Belkin USB
2.0 Dual-Port
PCI Card
P73941 F5U219
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
Introduction Welcome to Belkin USB 2.0! Thank you for purchasing the Belkin USB 2.0 Dual-Port PCI Card (the PCI Card). Now you can upgrade your computer to the latest USB technology. You will be able to take advantage of a host of new high-speed USB 2.0 products! Your USB 2.0 products—including hard drives, scanners, printers, video cameras, and more—will all work much faster than ever before. Your current USB devices will continue to work as they always have, and in some cases even better wi
Resumo do conteúdo contido na página número 4
Features • Three USB host controllers integrated into a single PCI Card—one providing 480Mbps of USB bandwidth and two providing 12Mbps of USB bandwidth • 2 high-speed USB ports • Simultaneous connection capability for low-, full-, and high-speed devices • Auto-detection of new devices as they are connected, along with the speed of each device • Backward-compatibility with USB 1.1 devices • Full compliance with USB specifications • Plug-and-Play technology Specifications • Open Host Controller I
Resumo do conteúdo contido na página número 5
Package Contents • Belkin USB 2.0 Dual-Port PCI Card • User Manual • Installation CD System Requirements • PC-compatible computer with available PCI slot ® • Windows 98 SE, 2000, Me, or XP operating system 3
Resumo do conteúdo contido na página número 6
Operating System Compatibility Operating System USB 1.x USB 2.0 Support Support Windows 98 SE Yes Yes Windows 2000 Yes Yes Windows Me Yes Yes Windows XP Yes Yes USB 2.0 Dual-Port PCI Card Description Figure 1 4
Resumo do conteúdo contido na página número 7
Installation Please refer to the section that corresponds to your version of the Windows operating system (OS). Installation Procedure for Windows 98 SE OS This installation procedure will successfully install two USB 1.1 host controllers and a single USB 2.0 enhanced host controller. 1. Ensure that your computer is powered down. 2. Locate an available PCI slot on your computer. 3. Insert the PCI Card into the slot. Apply enough pressure to ensure that it is fully seated. 4. Insert the Belkin US
Resumo do conteúdo contido na página número 8
Installation (continued) 9. The Windows OS will find the drivers for “NEC USB Open Host Controller”. Click “Next”. 10. The Windows OS may ask you for the Windows OS installation CD. If prompted to, insert the CD into the CD-ROM drive and follow the subsequent instructions. 11. After the Windows OS installs the required drivers, installation of the first host controller is complete. Click “Finish”. 12. The “Add New Hardware” wizard will repeat the installation process for the second OHCI host c
Resumo do conteúdo contido na página número 9
Installation (continued) 19. The Windows OS will now install the F5U219 enhanced host controller driver. Click “Finish”. 20. After installation of the USB host controllers, the Windows OS will detect “USB Root Hub” and automatically install the required driver support. This will repeat for each of the two USB OHCI host controllers. Installation of the PCI Card is now complete. Verifying Proper Installation (Windows 98/98 SE OS) Check the “Windows Device Manager” to confirm that your PCI Card ha
Resumo do conteúdo contido na página número 10
Installation (continued) Installation Procedure for Windows 2000 OS This installation procedure will successfully install two USB OHCI host controllers and a single USB 2.0 enhanced host controller. 1. Locate an available PCI slot on your computer. 2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully seated. 3. Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-ROM drive. 4. After installing the PCI Card, turn on the computer. 5. After loading, t
Resumo do conteúdo contido na página número 11
Installation (continued) 7. A new “Found New Hardware Wizard” window will open. Check the “CD-ROM drive” box. Click “Next”. 8. The Windows OS will find “Belkin USB 2.0 Hi-Speed Host Controller”. Click “Next”. 9. The Windows OS will now install the “Enhanced Host Controller” driver. Click “Finish”. 10. Installation of the USB 2.0 Dual-Port PCI Card is now complete. Verifying Proper Installation (Windows 2000 OS) After installation, check the Windows OS’s Device Manager to confirm that the PCI
Resumo do conteúdo contido na página número 12
Installation (continued) Installation Procedure for Windows Me OS This installation procedure will successfully install two USB OHCI host controllers and a single USB 2.0 enhanced host controller. 1. Locate an available PCI slot on your computer. 2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully seated. 3. Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-ROM drive. 4. After installing the PCI Card, turn on your computer. 5. After loading, th
Resumo do conteúdo contido na página número 13
Installation (continued) 8. Check the “CD-ROM Drives” box. Click “Next”. 9. The Windows OS will locate the driver for “Belkin USB 2.0 Hi-Speed USB Host Controller”. Click “Next”. 10. The Windows OS will now install the “Belkin USB 2.0 Hi-Speed USB Host Controller” driver. Click “Finish”. 11. The Windows OS will detect “NEC USB Open Host Controller (E13+)”. The required driver support will be automatically installed. No user input is required. 12. After installation of the USB host controllers,
Resumo do conteúdo contido na página número 14
Installation (continued) The “Device Manager” list will now include two “NEC USB Open Host Controller (E13+)” entries, one “Belkin USB 2.0 Hi-Speed Host Controller”entry, and two additional “USB Root Hub” entries. Installation Procedure for Windows XP OS 1. Locate an available PCI slot on your computer. 2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully seated. 3. Insert the Belkin USB 2.0 driver installation CD into your computer’s CD-ROM drive. 4. After installing
Resumo do conteúdo contido na página número 15
Installation (continued) 7. The Windows XP OS will detect “USB Root Hub”. The required driver support will be automatically installed. This will repeat two times. Installation is now complete. Verifying Proper Installation (Windows XP OS) After installation, check the Windows XP OS’s Device Manager to confirm that the PCI Card has been installed. 1. Right-click on “My Computer”. 2. Select “Properties”. 3. Select the “Hardware” tab and click on the “Device Manager” button. 4. Click the plus sign
Resumo do conteúdo contido na página número 16
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F5U219 to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
Resumo do conteúdo contido na página número 17
Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants NN3 8RX • United Kingdom Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components, Ltd. 7 Bowen Cresent • West Gosford NSW 2250 • Australia Tel:
