Manual do usuário Lynx Audio Cable

Resumo do conteúdo contido na página número 1

STEP 5: Cable Installation
Connect L22 breakout cables to the Audio Port and Sync Port as shown below. Signals are assigned as follows:
Audio Port provides connections for all analog audio I/O
Sync Port provides connections for digital I/O and clock I/O


L22
CABLE LABELS
AUDIO PORT
CBL-L22AUDIO
ANALOG OUT 1
OUT 1
ANALOG OUT 2
OUT 2
ANALOG IN 1
IN 1
ANALOG IN 2
IN 2
CBL-L22SYNC
AES/EBU, S/PDIF IN
DIGITAL IN
SYNC PORT
AES/EBU, S/PDIF OUT
DIGITAL OUT
CLOCK IN
SYNC IN
WORD CLOCK OUT
CLOCK

Resumo do conteúdo contido na página número 2

INSTALLATION INSTRUCTIONS STEP 1: Install the L22 in your computer 1. Turn OFF the power to your computer system and disconnect the power cords. 2. Touch a metal plate on your computer system to ground yourself and discharge any static electricity. 3. Remove the cover from your computer chassis and select an empty PCI slot in your computer. 4. Insert the L22 into the selected PCI slot and press it down so that the contacts are securely seated. 5. Secure the bracket