Resumo do conteúdo contido na página número 1
HP LP1965 19", LP2065 20", and LP2465 24"
LCD Monitors
User Guide
Resumo do conteúdo contido na página número 2
© 2005–2008 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in
Resumo do conteúdo contido na página número 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Resumo do conteúdo contido na página número 4
iv About This Guide ENWW
Resumo do conteúdo contido na página número 5
Table of contents 1 Product Features HP LP1965, LP2065, and LP2465 Models ........................................................................................... 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 3 Maintenance Guidelines ....................................................................................................................... 4 Clean
Resumo do conteúdo contido na página número 6
Optimizing Digital Conversion ........................................................................... 25 Using the HP Display Assistant Utility ............................................................................... 25 Identifying Monitor Conditions ............................................................................................................ 26 Sleep Timer Mode .............................................................................................................
Resumo do conteúdo contido na página número 7
Appendix D LCD Monitor Quality and Pixel Policy ENWW vii
Resumo do conteúdo contido na página número 8
viii ENWW
Resumo do conteúdo contido na página número 9
1 Product Features HP LP1965, LP2065, and LP2465 Models The flat panel monitors have an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: LP1965 model, large 19-inch (48.3 cm) viewable area display with 1280 × 1024 resolution, plus ● full-screen support for lower resolutions LP2065 model, large 20.1-inch (51 cm) viewable area display with 1600 × 1200 resolution, plus ● full-screen support for lower resolutions ● LP2465 model, large 24-inch (61
Resumo do conteúdo contido na página número 10
AssetControl ● Compliant with the following regulated specifications: ● ◦ European Union CE Directives ◦ Swedish MPR II 1990 ◦ Swedish TCO Requirements 2 Chapter 1 Product Features ENWW
Resumo do conteúdo contido na página número 11
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 40 section in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an im
Resumo do conteúdo contido na página número 12
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the monitor
Resumo do conteúdo contido na página número 13
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Monitor Pedestal Base NOTE: Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other mounting fixture; i
Resumo do conteúdo contido na página número 14
Rear Components Figure 3-2 Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DVI-I Connectors Connects the DVI-I to VGA signal cable or DVI-D signal cable to the monitor. 5 USB Upstream Connects the monitor USB hub to a host USB port/hub. Connector 6 USB Downstream Connects optional USB devices to the monitor. Connec
Resumo do conteúdo contido na página número 15
Selecting the Signal Connectors and Cables The monitor features two DVI-I connectors capable of supporting either analog or digital input. The video mode supported by the DVI-I connector is determined by the video cable used. ● For digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal cable to a DVI-I connector on the monitor and the other end to the DVI connector on the computer. ● For analog operation, use the DVI-I to VGA signal cable provided. Connect the DVI-I to
Resumo do conteúdo contido na página número 16
Connecting the Monitor 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. Figure 3-5 Connecting the USB Cable WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature. • Plug the power cord int
Resumo do conteúdo contido na página número 17
4. Place the cables through the cable management channel on the back of the monitor base. Figure 3-7 Using the Cable Management Feature Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-8 Tilting the Monitor NOTE: The 24" model has a tilt range of -5 to +25 degrees. ENWW Adjusting the Monitor 9
Resumo do conteúdo contido na página número 18
2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-9 Swiveling the Monitor 3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. WARNING! A lock-down/release button on the front of the column prevents the display head of the 19" model from sliding up when the monitor is lifted. If the display head is locked in the lowest height position: a. Make sure that the monitor is safely positioned on a stable surface. b.
Resumo do conteúdo contido na página número 19
4. Pivot the monitor from landscape to portrait orientation viewing to adapt to your application. Figure 3-11 Pivoting the Monitor NOTE: The 20" model (shown above) pivots counter-clockwise; the 19" and 24" models pivot clockwise. To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD. Turning on the Monitor 1. Press the power switch to turn on the computer. 2. Press the master power switch on the rear of
Resumo do conteúdo contido na página número 20
Connecting USB Devices The monitor provides four USB connectors, two on the side panel and two on the rear panel, used to connect devices such as a digital camera, USB keyboard, or USB mouse. NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports on the monitor. Refer to Step 2 in Connecting the Monitor on page 8. Figure 3-12 Connecting USB Devices 12 Chapter 3 Setting Up the Monitor ENWW
