Resumo do conteúdo contido na página número 1
User’s Guide
Color Monitor Series
v72
Resumo do conteúdo contido na página número 2
© 2003 Hewlett-Packard Development Company, L.P. HP, Hewlett-Packard, and the Hewlett-Packard logo are trademarks of Hewlett-Packard Company in the U.S. and other countries/regions. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries/regions. Intel, Pentium, Intel Inside, and Celeron are trademarks of Intel Corporation in the U.S. and other countries/regions. Adobe, Acrobat, and Acrobat Reader are trademarks or registered tradema
Resumo do conteúdo contido na página número 3
Contents 1 Introduction Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 2 Safety and Maintenance Guidelines Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . 2–1 Power Requirements . . . . . . . . . . . . . . . . . . . 2–1 Important Safety Information. . . . . . . . . . . . . . 2–1 Maintenance Guidelines . . . . . . . . . . . . . . . . . . . 2–2 Removing the Monitor Base . . . . . . . . . . . . . . 2–4 3 Installation Monitor Base Installation . . . . . .
Resumo do conteúdo contido na página número 4
A Troubleshooting Solving Common Problems . . . . . . . . . . . . . . . . . A–1 Using the World Wide Web . . . . . . . . . . . . . . . . A–4 Preparing to Call Technical Support . . . . . . . . . . . A–4 B Technical Specifications v72 Series Monitor. . . . . . . . . . . . . . . . . . . . . . . B–1 C Agency Regulatory Notices Federal Communications Commission Notice. . . . . C–1 Modifications . . . . . . . . . . . . . . . . . . . . . . . . C–1 Cables. . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 5
1 Introduction Your microprocessor-based, digitally controlled color monitor is a high-performance and easy-to-use product. It employs the latest on-screen menu technology. Kit Contents The monitor kit contains: ■ CRT monitor ■ Monitor Base (pre-installed on select models) ■ AC power cord (select models) ■ Documentation kit User’s Guide 1–1
Resumo do conteúdo contido na página número 6
Introduction 1–2 User’s Guide
Resumo do conteúdo contido na página número 7
2 Safety and Maintenance Guidelines Safety Guidelines Power Requirements Refer to the “Power Cord Set Requirements” on page C–4 for information on the correct power cord set for this device. Important Safety Information WARNING: To reduce the risk of electric shock or damage to your Å equipment, do not disable the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator. The grounding plug is an i
Resumo do conteúdo contido na página número 8
Safety and Maintenance Guidelines Maintenance Guidelines To enhance the performance and extend the life of your monitor, follow these guidelines: ■ Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly, or has been dropped or damaged, first unplug from power outlet, then contact your Hewlett-Packard authorized dealer, reseller, or service provider. ■ Adjust only those controls that are discussed in the operating instructions
Resumo do conteúdo contido na página número 9
Safety and Maintenance Guidelines ■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ■ Do not place plants on top of your monitor. Water or dirt from the plant may get into the vents. ■ Do not drop your monitor or place it on an unstable surface. ■ Do not allow anything to rest on the power cord. Do not walk on the cord. ■ Keep your monitor in a well-ventilated a
Resumo do conteúdo contido na página número 10
Safety and Maintenance Guidelines Removing the Monitor Base In the event that you need to disassemble the base from the monitor, follow these instructions: 1. If you must remove the base attachment, release the catch and slide the base toward the back of your monitor. 2. Lift the base up and away from your monitor. 2–4 User’s Guide
Resumo do conteúdo contido na página número 11
3 Installation Monitor Base Installation On some monitors, the base must be attached prior to monitor installation. If you need to attach the base, follow these steps: 1. Align the hooks on the base with the sockets on the bottom of the monitor and attach the base. User’s Guide 3–1
Resumo do conteúdo contido na página número 12
Installation 2. Push the base toward the front of the monitor until it stops. Monitor Installation Before installing your monitor, place it in a convenient, well-ventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices. 2. Connect the video cable (blue connector) 1 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector. CAUTION: To avoid damaging
Resumo do conteúdo contido na página número 13
Installation 3. Connect the power cord 2 to the back of the monitor, then connect the power cord to a power outlet. 4. Power on your computer and monitor. If your monitor fails to function properly, refer to Appendix A, “Troubleshooting.” 5. If necessary, adjust the front panel monitor controls according to your personal preference. See “Front Panel Controls” on page 4–5 for detailed information. Your monitor installation is now complete. User’s Guide 3–3
Resumo do conteúdo contido na página número 14
Installation 3–4 User’s Guide
Resumo do conteúdo contido na página número 15
4 Operation Information Files The CD-ROM included with this monitor contains two data files that must be installed onto your computer: An .INF file and an .ICM file. The .INF file designates software and defines monitor resources used by Microsoft Windows to ensure monitor compatibility with the graphics adapter in your computer. The .ICM file provides color matching consistency between your monitor screen and your printer. Once installed, this file is activated by graphics programs that
Resumo do conteúdo contido na página número 16
Operation Installing Drivers The HP monitor comes with driver software allowing you to take advantage of the Plug and Play feature of the Windows Me, Windows 2000, or Windows XP operating system. This software enables the computer to communicate with the monitor and use all the monitor features. HP computers may come with the Plug and Play drivers pre-installed. If you have an older computer, these drivers may not be pre-installed and you may need to install the drivers from the CD-ROM d
Resumo do conteúdo contido na página número 17
Operation Windows Me users The procedure for installing the driver for your operating system may vary. To install the driver for the v72 monitor: 1. Click Start, select Settings, and then click Control Panel. 2. Double-click Display. 3. Click the Settings tab. 4. Click the Advanced button. 5. Select the Monitor tab. 6. Click the Change button. 7. Select the Specify the location of the driver box, and then click Next. 8. Find and open the hp_v72.inf file on the CD-ROM disc in the Drivers direc
Resumo do conteúdo contido na página número 18
Operation 8. Click Properties. 9. Select the Driver tab. 10. Click Update Driver. 11. Select the Install from a list or specific location box, and then click Next. 12. Select the Don’t search box, and then click Next. 13. Click Have Disk. 14. Click Browse. 15. Find and open the hp_v72.inf file on the CD-ROM disc in the Drivers directory, and click OK. 16. Click Next to install the monitor driver. If the installation procedure of the monitor driver for the Windows 2000, Windows Me, or Windows
Resumo do conteúdo contido na página número 19
Operation Front Panel Controls Front Panel Controls Item Icon Name Function Select Launches on-screen displays, selects functions and 1 adjustments, and exits menus and On-Screen Display. Left Adjustment Moves backward through menu 2 options or decreases adjustment levels. Right Adjustment Moves forward through menu options or increases adjustment 3 levels. Power/LED Controls power to the monitor. The LED on the power button 4 indicates the state of the monitor. User’s Guide 4–5
Resumo do conteúdo contido na página número 20
Operation On-Screen Display The On-Screen Display (OSD) adjusts the screen image based on your viewing preferences. To access the OSD, do the following: 1. If the monitor is not already on, press the Power button to turn on the monitor. 2. Press the Select button to display the On-Screen Display menu. A screen similar to this one appears. For a description of the icons that appear on the screen, see “On-Screen Display Functions” on page 4–7. 3. To move to a function, press the Right-Adjustm
