Resumo do conteúdo contido na página número 1
® TM
MultiSync LCD1980SXi
Resumo do conteúdo contido na página número 2
Index Warning .................................................................................................................... 1 Contents ................................................................................................................. 2 Quick Start ............................................................................................................. 3 Controls .............................................................................................................
Resumo do conteúdo contido na página número 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Resumo do conteúdo contido na página número 4
Contents ® Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1980SXi™ monitor with tilt/swivel/pivot/adjustable stand • Power Cord • Video Signal Cable (15-pin mini D-SUB male to DVI-A) • Video Signal Cable (DVI-D to DVI-D cable) • User’s Manual • Cable Cover Power Cord 15-pin mini D-SUB male to DVI-A Cable Cover DVI-D to DVI-D cable ® TM MultiSync LCD1980SXi User’s Manual *Remember to save your original box and packing material to transport or ship the monitor
Resumo do conteúdo contido na página número 5
Quick Start ® To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB to DVI-A signal cable to the connector of the display card in your system (Figure A.2). For the MAC: Connect the MultiSync Macintosh cable adapte
Resumo do conteúdo contido na página número 6
Quick Start –continued INPUT1 INPUT2 INPUT1 INPUT2 Figure C.2 Figure C.1 NEC optional product attachment. Do not Power Vacation use this connector unless specified. Button Switch Figure D.1 Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1
Resumo do conteúdo contido na página número 7
Quick Start –continued Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching your fingers. To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-clockwise from Portrait to Landscape (Figure R.1). To toggle the orientation of the OSM menu bet
Resumo do conteúdo contido na página número 8
Quick Start –continued Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a nonabrasive surface. (Place the screen on a 33 mm platform so that the stand is parallel with the surface.) (Figure S.1) 33mm Figure S.1 4. Remove the two top screws connecting the monitor to the stand (Figure S.2). Turn the stand to 180˚ counterclo
Resumo do conteúdo contido na página número 9
Controls ® OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM menu, press any of the control buttons ( , , –, +). To change signal input, press the SELECT button. NOTE: OSM must be closed in order to change signal input. Menu EXIT Exits the OSM controls. Exits to the OSM main menu. CONTROL / Moves the highlighted area left/right to select control menus. Moves the highlighted area up/down to select one of the controls. ADJUST –/+ Move
Resumo do conteúdo contido na página número 10
Controls –continued Use left/Right Menu to center the image on the screen. If the H.Size or V.Size is wrongly calibrated, the result would look like the left drawing. The image should be homogeneous. Wrong Correct FINE (Analog input only) Improves focus, clarity and image stability by increasing or decreasing this setting. If the “Auto Adjust function” and the “H.Size” function do not give you a satisfactory picture setting, a fine tuning can be performed using the “Fine” function. It improves f
Resumo do conteúdo contido na página número 11
Controls –continued CUSTOM2: Zoom with top left corner fixed. The image is expanded from the rate of 1.00 to 3.00 times individually for horizontal (H.EXPANSION) and vertical (V.EXPANSION) direction by 0.01 step. VIDEO DETECT: Selects the method of video detection when more than one computer is connected. FIRST DETECT: The video input has to be switched to “FIRST DETECT” mode. When the current video input signal is not present, then the monitor searches for a video signal from the other video in
Resumo do conteúdo contido na página número 12
Controls –continued OSM TURN OFF: The OSM control menu will stay on as long as it is use. In the OSM Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choices are 10- 120 seconds by 5 second increments. OSM LOCK OUT: This control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are lo
Resumo do conteúdo contido na página número 13
Long Cable Compensation Adjustment Long Cable Compensation should only be performed when using extended length cables or to compensate for a low-quality video signal. To perform the long cable compensation adjustment, follow these six steps: 1.For optimal adjustment, download the “LCD Long Cable Comp Test Pattern” and “Read Me” file at www.necmitsubishi.com and display the test pattern during this adjustment. 2. In order to perform the adjustment, enter the Advanced OSM: •Turn off your monitor.
Resumo do conteúdo contido na página número 14
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabin
Resumo do conteúdo contido na página número 15
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. Th
Resumo do conteúdo contido na página número 16
Specifications ® Monitor MultiSync LCD1980SXi™ Notes Specifications Monitor LCD Module Diagonal: 19.0 inch Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 19.0 inch crystal display (LCD); 0.294 mm dot pitch; 2 ™ Native Resolution (Pixel Count): 1280x1024 270cd/m white luminance (typical); XtraView+ technology; 500:1 contrast ratio (typical) Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertic
Resumo do conteúdo contido na página número 17
Features ™ ambix+ Technology: Dual input technology allowing both analog and digital inputs off of one connector (DVI-I) as well as additional legacy analog support off of a traditional ® 15-pin VGA connector. Provides traditional MultiSync technology compatibility for analog as well as DVI-based digital compatibility for digital inputs. DVI-based digital interfaces include DVI-D,DFP and P&D. DVI-I: The integrated interface ratified by the Digital Display Working Group (DDWG) that allows both di
Resumo do conteúdo contido na página número 18
Features –continued ® IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the air conditioning costs of the workplace. Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the resolution required. ® FullScan Capability: Allows you to
Resumo do conteúdo contido na página número 19
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the Vacation Switch should be in the ON position. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and
Resumo do conteúdo contido na página número 20
References NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Customer Service Policies & Processes: http://www.necmitsubishi.com/css/ ServicePolicies/ServicePolicies.htm Online Technical Support Knowledge Base: http://www.necmitsubishi.com/ css/knowledgebase.cfm Customer Service & Technical Support Email: http://www.necmitsubishi.com/ css/tech
