Resumo do conteúdo contido na página número 1
Operating
Instructions
Model BT-H1700P
UNDER PULSE COLOR
DEGAUSS SCAN CROSS OFF
SLOT 1 SLOT 2 SLOT 3 POWER
A B C D E F
VOLUME MENU SCREENS ASPECT AREA INPUT SELECT
CHECK MARKER
Multi-Format Monitor
Before attempting to connect, operate or adjust this product, please read thess instructions completly.
Printed in Japan
LCT1110-001A
P
VQT9586 1001-PN-I-U-VP
ENGLISH
Resumo do conteúdo contido na página número 2
SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions. FCC NOTICE (U.S.A. only) WARNINGS To prevent fire or shock hazard, do not expose this CAUTION: Changes or modifications not approved by monitor to rain or moisture. Dangerous high voltages PANASONIC could void the user’s authority to operate the are present inside the unit. Do not remove the back equipment. cover of the cabinet. When ser
Resumo do conteúdo contido na página número 3
CONTENTS SAFETY PRECAUTIONS ........................................................................2 CONTROLS AND FEATURES ................................................................4 CONTROLS AND FEATURES (INPUT CARD: OPTIONAL)....................................................................6 PREPARATION .......................................................................................8 BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) .................................................
Resumo do conteúdo contido na página número 4
Resumo do conteúdo contido na página número 5
REAR/SIDE VIEW REMOTE MAKE RS-232C 24 25 28 26 MAIN POWER 27 Refer to pages 8 and 9 for correspondence between the 12 COLOR OFF button/lamp input terminals and the INPUT SELECT buttons. Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF 22 Power lamp button is pressed while lit, the light goes off and the Unlit : The main power is OFF. normal screen is restored. Orange : The main power is ON, but the monitor’s power Use t
Resumo do conteúdo contido na página número 6
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) VIDEO INPUT CARD (OPTIONAL: BT-YA701P) 1 Video input/output terminals Input (IN) and output (OUT) terminals for video signals. The IN and OUT terminals are bridge-connected. VIDEO 1 (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) IN OUT Select VIDEO 1 : press INPUT SELECT A/C/E button VIDEO 2 1 Select VIDEO 2 : press INPUT SELECT B/D/F button IN OUT 2 S-video input terminal Input terminal for the S-vid
Resumo do conteúdo contido na página número 7
SDI INPUT CARD (OPTIONAL: BT-YA703P) 1 Output terminal for a selected component serial digital signal SWITCHED Output terminal for s selected digital signal (the input OUT displayed on the screen). The output signal is cable- 1 compensated. NOTE: When the monitor’s power is OFF, no digital IN SDI 1 signal is output. 2 Input terminals for component serial digital 2 IN SDI 2 signals 4 Input terminals for the digital signal. Select SDI 1 : press INPUT SELECT A/C/E button A UDIO 1 Select SDI 2 : p
Resumo do conteúdo contido na página número 8
Resumo do conteúdo contido na página número 9
Resumo do conteúdo contido na página número 10
Resumo do conteúdo contido na página número 11
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. APERTURE CONTROL 3. sub menu POSITION Compensates the frequency Items : Selects the display position of the sub menu characteristics of the input superimposed on the screen. LEVEL :00 video signal. Press the CONTROL FREQ. :HIGH Settings : UPPER/LOWER sub menu reset button to display the setting Functions : UPPER : An adjustment item is displayed on the menu illustrated on the right. top of the screen. NOTE :A
Resumo do conteúdo contido na página número 12
5. AREA MARKER-R R-Y PHASE 90 Items : Selects the size marker for the other screen ratio R/B GAIN 0.79 (aspect) used when the screen ratio is 16:9. (for ITU601 external control) G-Y PHASE 244 Settings : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2 G/B GAIN 0.45 Functions : OFF: The marker is not displayed. R-Y PHASE 90 16:9/4:3/13:9/14:9: Displays the marker (a white quadrangle) showing the screen size of each R/B GAIN 0.86 ITU709 aspect ratio. G-Y PHASE 244 MODE 1/MODE 2: Displays no markers because G/
Resumo do conteúdo contido na página número 13
HOW TO USE “SETUP MENU” “SETUP MENU” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance. 4 SIZE/POSI. ADJ. Adjusts the size or position of the picture. 5 DISTORTION ADJ. Compensates the picture distortion. 6 STATUS DISPLAY Makes the status of the input signal appear or disap
Resumo do conteúdo contido na página número 14
HOW TO USE “SETUP MENU” (cont'd) ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. FUNCTION SETTING Item : CONTRAST Selects the colour system and Adjustment displays the monitor’s power- range : –20 ~ 00 ~ +20 COLOR SYSTEM :AUTO up time or the total usage time. RUSH DELAY TIME :STD. Function : For approximate adjustment of the picture HOUR METER X100h :000 Press the button to display contrast. Before adjustment, set the CONTRAST the setting menu illustrated on
Resumo do conteúdo contido na página número 15
3. COLOR TEMP./BAL. 4. SIZE/POSI. ADJ. Sets or adjusts the colour Adjusts the size or position of temperature or white balance. the picture. Press the COLOR TEMP. :LOW H.SIZE :00 Press the button to display button to display the setting BLUE DRIVE :000 H.POSITION :00 RED DRIVE :000 V.SIZE :00 the setting menu illustrated on menu illustrated on the right. GREEN CUTOFF :000 V.POSITION :00 BLUE CUTO
Resumo do conteúdo contido na página número 16
5. DISTORTION ADJ. 6. STATUS DISPLAY Compensates the picture Makes the status of the input distortion. Press the button signal appear or disappear on STATUS DISPLAY :ON PINCUSHION :00 to display the setting menu the screen. Press the 1080/1035 :1080 PIN.BALANCE :00 PARALLELOGRAM :00 illustrated on the right. button to display the setting TRAPEZOID :00 sub menu menu illustrated on the right. reset EXIT: MENU ADJUST:- +
Resumo do conteúdo contido na página número 17
HOW TO USE EXTERNAL CONTROL ABOUT EXTERNAL CONTROL This multi-format monitor has two external control terminals. One is the MAKE terminal, which controls the monitor by connecting the terminals with many functions to the ground (GND) terminal. The other is the RS-232C terminal, which allows the monitor to be controlled by a PC via serial communication. Control priority is in the following order; the MAKE terminal > the RS-232C terminal > the buttons on the front panel. HOW TO USE THE MAKE TE
Resumo do conteúdo contido na página número 18
HOW TO USE EXTERNAL CONTROL (cont.) HOW TO USE THE RS-232C TERMINAL You can control the monitor from your PC via the RS-232C terminal. For details on operating the monitor from the PC, consult your dealer or service centre for details. 5 9 4 8 1. Cable 3 7 2 Prepare a straight cable with a D-sub connector (9-pin, female) and a D-sub 6 1 connector (9-pin, male) 2. Communications Specifications Baud Rate : 4800/9600/19200 (factory pre-set; 4800) Pin No. Signal Data Bits : 8 bits 1 DCD (Data Carr
Resumo do conteúdo contido na página número 19
TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance. Reference Problems Points to be checked Measures (Remedy) pages No power supply Is the power plug loosened or Firmly insert the power plug. 5 disconnected? No picture with Is the signal cable disconnected? Connect the signal cable firmly. 6, 7 the power on Is the
Resumo do conteúdo contido na página número 20
TROUBLESHOOTING (cont.) Reference Problems Points to be checked Measures (Remedy) pages Irregular colour Is the monitor placed or moved close to Move the device away from the monitor. Press the DEGAUSS button on the front panel to a speaker or any other device degauss the screen. 4 incorporating a magnet? When degaussing, wait more than 30 minutes for Has the position of the monitor been changed with the power on? maximum effect. Wrong picture Has the picture position, size or Adjust the picture
