Руководство по эксплуатации Lexmark T522

Краткое содержание страницы № 1

Loading a paper tray 1
Printing
Complete these instructions to load print materials into any of the standard or optional trays.
1 Remove the paper tray.
Paper handling
2 Pull the width guide tab and slide the width guide to the far right side of the tray.
3 Squeeze the length guide lever and slide the length guide to the correct position for
the size paper you are loading.
Maintenance
Pull here
Length guide
lever
Length
Troubleshooting
guide
Width
guide
Administration
Paper size
Index
i

Краткое содержание страницы № 2

Loading a paper tray 2 Printing 4 Place the paper into the paper tray with the recommended print side face down for single-sided printing and face up for double-sided printing. Do not fill paper above the stack height mark. Paper handling 5 Pull the width guide tab and slide the width guide to the left until it lightly rests against the edge of the paper stack. Maintenance Troubleshooting Paper capacity mark Administration Index 6 Reinstall the tray. www.lexmark.com Lexmark T522

Краткое содержание страницы № 3

Loading a paper tray 3 Printing Loading letterhead For simplex (single-sided) printing on letterhead, place the printed side face down as shown. Paper handling Maintenance Troubleshooting Administration Index www.lexmark.com Lexmark T522

Краткое содержание страницы № 4

Loading a paper tray 4 Printing For duplex printing on letterhead, place the printed side face up as shown. Paper handling Maintenance Troubleshooting Note: The Paper Loading menu item lets you print simplex (single-sided) jobs on letterhead (or other preprinted media) that has been loaded specifically for Administration duplex printing. See Paper Loading for more information. Index www.lexmark.com Lexmark T522