Краткое содержание страницы № 1
21011
2.4 GHz Dual Cordless Handset
Call Waiting Caller ID Speakerphone
User’s Guide
We bring good things to life.
Краткое содержание страницы № 2
EQUIPMENT APPROVAL INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provi
Краткое содержание страницы № 3
TABLE OF CONTENTS EQUIPMENT APPROVAL INFORMATION........ 2 WALKIE TALKIE ............................... 23 INTERFERENCE INFORMATION ................... 2 TIME OF DAY.................................. 25 HEARING AID COMPATIBILITY (HAC) ........ 2 DEFAULT ........................................ 26 INTRODUCTION ..................................... 5 BASIC OPERATION ............................... 27 HANDSET AND CHARGE CRADLE LAYOUT .. 7 SPEAKERPHONE .............................. 27 BASE LAYOUT
Краткое содержание страницы № 4
CORDLESS HANDSET VOLUME CALLER ID ........................................ 44 CONTROL ............................ 35 RECEIVING AND STORING SPEAKERPHONE VOLUME CALL RECORDS ............................... 45 CONTROL ............................ 35 REVIEWING CALL RECORDS ............... 45 INTERCOM ...................................... 36 TRANSFERRING CID RECORDS MAKING AN INTERCOM CALL ............. 36 TO MEMORY................................... 46 RECEIVING AN INTERCOM CALL ... 37 DIALING A C
Краткое содержание страницы № 5
INTRODUCTION CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Congratulations on purchasing this GE Dual Cordless Handset Telephone System. This system operates in the 2.4 GHz frequency range, and is unique to conventional cordless telephones. When the base is connected to electrical power and a telephone line, it can support up to
Краткое содержание страницы № 6
Your Caller ID Call Waiting phone allows you to: •View the name and telephone number of a caller while you are on the phone (Call Waiting Caller ID). • Identify callers before you answer the phone. •View the time and date of each incoming call. •Record up to 40 Caller ID messages sequentially in each handset and the base. • Know who called while you are on the other line or when you were away. •Screen unwanted calls, eliminate harassment from annoying calls, or to get prepared before answering a
Краткое содержание страницы № 7
c l t a a r i o e i h d n m k c g n a t s b l l f e a redial . c e n c e r HANDSET AND CHARGE CRADLE LAYOUT soft key Display buttons AC power supply format/ conference button handset charge cradle TALK/callback cid/vol v format button TALK button v page ringer redial def 1 abc 3 2 flash button 4 ghi jkl mno 6 5 button charge wxyz 7 pqrs tuv 8 9 tone pause oper # * 0 page/int ringer button button charge indicator # pause button * tone button BASE LAYOUT soft key buttons Display redial button ring
Краткое содержание страницы № 8
c l t a a r i o e i i h d n n m k k c c g n a t a t s b b l l l l f e e a redial a redial . c c e n n c c e e r r BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the items shown here. v v CID def v format v 1 2 abc 3 format TALK v TALK v v ghi mno 4 5 jkl 6 page ringer volume page ringer v wxyz abc def 1 2 abc 3 def 7 pqrs 8 tuv 9 1 2 3 4 ghi jkl 6 mno pause 4 ghi 5 jkl 6 mno 5 charge * tone 0 oper # pqrs tuv wxyz page/int. 7 pqrs 8 tuv 9 wxyz 7 8 9 speaker tone oper #pause * to
Краткое содержание страницы № 9
IMPORTANT INSTALLATION INFORMATION • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. •Temporarily disconnect any equipment connected to the phone such as faxes, other phones, or modems. IMPO
Краткое содержание страницы № 10
INSTALLING THE PHONE Choose the best location to install your base and handset charge cradle. Your base and handset charge cradle should be placed on a level surface such as a desk or table top, or you may mount the base on a wall. charge CONNECTING THE AC (ELECTRICAL) POWER 1. Plug the power supply cord into the power jack on the back of the base and the other end into an electrical outlet. When the handset is placed on the cradle the charge indicator turns on to indicate the battery is chargin
Краткое содержание страницы № 11
INSTALLING THE HANDSET BATTERY NOTE: You must connect the handset battery before use. 1. Push down on the top of the battery compartment cover (located on the back of each handset) and remove the cover. 2. Lift the battery pack and connect it's plug to the jack inside the compartment. NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment as shown in the illustration. 3. Close the battery compartment by pushing the cover up until it snaps into pla
Краткое содержание страницы № 12
WALL MOUNTING THE BASE NOTE: For best results, leave the phone on a flat surface during initial charging before you hang the phone on the wall. 1. Turn the base over. 2. Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the bottom of the base. Then push down and snap the pedestal into place. 3. Slip the mounting holes (on the back of the pedestal) over the wall plate posts and slide the unit down into place. (Wal
Краткое содержание страницы № 13
3. Press cid/vol (up and down arrow) button on the handset or the CID (up and down arrow) button on the base to scroll to LANGUAGE. 4. Press the OK soft key and SET LANGUAGE 1ENG 2 FRA 3ESP shows in the display. 5. Use the touch tone pad on your handset to select 1ENG, 2FRA, or 3ESP, or use the cid/vol (up or down arrow) button on the handset or the CID (up or down arrow) button on the base to move the arrow to your selection. English is the default setting. SET LANGUAGE 1 ENG 2 FRA 3 ESP OK
Краткое содержание страницы № 14
1. Make sure your base is at the main menu. If your base is not in the menu mode, press the MENU soft key. 2. Press the CID (up or down arrow) button to scroll to CONTRAST. LANGUAGE CONTRAST OK EXIT 3. Press the OK soft key and SET CONTRAST 1 2 3 shows in the display. 4. Use the touch tone pad on your base to select 1, 2, or 3, or use the CID (up or down arrow) button to move the arrow to your selection. Contrast level 1 is the default setting. SET CONTRAST 1 2 3 OK EXIT 5. Press the OK
Краткое содержание страницы № 15
AREA CODE If you enter a 3-digit area code in the area code menu, your local area code will not appear in Caller ID messages you receive. Instead, you will see only the local seven digit number. Calls you receive from outside your local area code will show the full ten-digit number. This setting may be made with the handset or the base. 1. Make sure your handset or base is at the main menu. If your handset or base is not in the menu mode, press the MENU soft key. 2. Press the cid/vol (up or down
Краткое содержание страницы № 16
LANGUAGE AREA CODE AREA CODE RINGER TONE OK EXIT OK EXIT HANDSET DISPLAY BASE DISPLAY RINGER TONE This setting may be made with the handset or the base. You may choose from six different ringer tones. 1. Make sure your handset or base is in the menu mode. If your handset or base is not in the menu mode, press the MENU soft key. 2. Press the cid/vol (up or down arrow) button on the handset or the CID (up and down arrow) button on the base to scroll to RINGER TONE. AREA CODE RINGER TONE RINGER TO
Краткое содержание страницы № 17
5. Press the OK soft key to save your selection, and return to the main menu. The new ringer tone is displayed for two seconds. RINGER TONE - 2 NOTE: Press the EXIT soft key once to keep the previous setting and return to the main menu screen. AREA CODE RINGER TONE REGISTRATION RINGER TONE OK EXIT OK EXIT HANDSET DISPLAY BASE DISPLAY TONE/PULSE Most telephone systems use tone dialing, however, some may still use pulse dialing. Depending on your telephone system, set the dialing mode as follo
Краткое содержание страницы № 18
4. Use the touch tone pad on the base to select 1TONE or 2PULSE, or press the CID (up or down arrow) button to move the arrow to your selection. The default setting is 1. 5. Press the OK soft key to save your selection, and return to the main menu. The dialing mode displays for two seconds. TONE NOTE: Press the EXIT soft key once to keep the previous setting and return to the main menu screen. TONE / PULSE TIME OK EXIT NOTE: If you aren’t sure which dialing system you have, set the telephone t
Краткое содержание страницы № 19
4. Press the OK soft key and HANDSET NEEDS REGISTRATION shows in the display. HANDSET NEEDS REGISTER REGISTRATION HANDSET ? OK EXIT OK EXIT 5. Press the OK soft key and HOLD, BASE PAGE WAIT FOR BEEP shows in the display. HOLD BASE PAGE WAIT FOR BEEP EXIT 6. Press and hold the page/int button on the base until you hear a long beep and the handset displays CONFIRM REGISTRATION? CONFIRM REGISTRATION ? OK EXIT 7. Press the OK soft key on the handset to confirm the registration. HANDSET # REGIST
Краткое содержание страницы № 20
BILL SMITH HANDSET 2 MENU DIR 8. Use the touch tone pad to enter the name. More than one letter is stored in each of the number keys. For example, to enter the name Bill Smith, press the 2 key twice for the letter B. Briefly pause and the cursor moves to the next field. Press the 4 key 3 times for the letter I. Briefly pause and the cursor moves to the next field. Press the 5 key 3 times for the letter L. Briefly pause and the cursor moves to the next field. Press the 5 key 3 times for the seco
