Краткое содержание страницы № 1
Southwestern Bell
Freedom Phone
2.4GHz
Cordless Dual Handset Telephone With Call Waiting Caller ID
GH3210 Owner’s Manual
Toll Free Helpline 1-800-366-0937
http://www.swbfreedomphone.com
Краткое содержание страницы № 2
CONTENTS IMPORTANT SAFETY INSTRUCTIONS.......................................3 SAFETY INSTRUCTIONS FOR BATTERIES...............................4 NAME OF CONTROLS AND INDICATIONS.................................5 FCC WANTS YOU TO KNOW.....................................................9 INTRODUCTION ABOUT GH3210........................................................................10 FEATURES............................................................................10 BOX CONTENTS....
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Краткое содержание страницы № 4
SAFETY INSTRUCTIONS FOR BATTERIES Safety Instructions for Batteries Handset Battery Pack CAUTION: Use only a Southwestern Bell Freedom Phone approved battery pack in the handset of your GH3210 Cordless Telephone. To reduce the risk of fire or injury, always do the following when replacing, discarding or charging batteries. When handling the batteries, be careful not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conducting material may overhe
Краткое содержание страницы № 5
NAME OF CONTROLS AND INDICATIONS Handset Controls, Indicators Receiver Volume New Call Indicator Control Flashes to indicate there -To adjust the receiver are calls that have not been volume level reviewed -Caller ID Review buttons -Memory scroll buttons Earpiece S S C C R R VOL O O L L L L LCD Display Intercom/Transfer Conference Intercom/Transfer allows conference allows three- the 2 handsets to communi- way conversation cate with each other Program program button to set Redial/Pause but
Краткое содержание страницы № 6
NAME OF CONTROLS AND INDICATIONS LCD Display Indicator Low Battery Ringer-off Program Clock Date Indicator Indicator Indicator New Call/ Handset#1 Call Counter Handset#2 Indicator MEMO Indicator 15-digit Number Line 15-character Text Line Low battery Indicator Lights up to indicate when the battery needs charging. Clock Shows the real time clock (AM/PM) format, or the time stamp of a Caller ID record. Ringer-off Indicator Lights up when ringer-off has been enabled. Date Shows the date (MM
Краткое содержание страницы № 7
Base Unit Controls and Indicators Telephone Line DC In 9v DC 500mA Connect the telephone line cord here Connect AC adaptor(A) cord here In Use/Charge LED Lights when the handset is in TALK mode or the handset is on the cradle and the battery Page Button Handset #2 is being charged.Flashes when Used to locate the an incoming call is received. handset Handset #1 IN USE R 7
Краткое содержание страницы № 8
Charger Unit Controls and Indicators DC In 9v DC 100mA Connect AC adaptor(B) cord here Charger LED Lights when the handset is on the cradle and the battery is being charged CHARGE R FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:47GW902BGH3210US.If required, this number must be provided to the telephone co
Краткое содержание страницы № 9
approved after July 23,2001,the REN for this product is part of the product identifier that has the format US: 47GW902BGH3210US.The digits represented by02 are the REN without a decimal point(e.g.,03 is a REN of 0.3).For earlier products, the REN is sepa- rately shown on the label. If your telephone equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn’t practical, yo
Краткое содержание страницы № 10
INTRODUCTION About the GH3210 The GH3210 is a 2.4GHz Cordless Phone with Caller Identifier . It is designed and engineered to exacting standards for reliability, long life, and outstanding performance. FEATURES Caller ID (50 call data memory locations) with call waiting 40 Channels (auto or manual selection) Conference / Intercom 10-Number One-touch Dial Memory Direct dialing from caller list Extended battery life Digital security coding TM TM The GH3210 features incl
Краткое содержание страницы № 11
INTRODUCTION (CONT.) Box Contents 1Base unit 2 AC adaptors with cord 1 charging cradle (9V 500mA / 9V 100mA) 2 Handsets with rechargeable batteries 2 Belt clip Quick installation guide Memory card Registration card Telephone line cord NOTE: a. Keep the shipping carton and packaging, in case you need to transport your phone. b. If any of these items are missing or damaged, contact your place of purchase. Preliminary Preparation / Telephone Line Installation 1. Never i
Краткое содержание страницы № 12
A INSTALLATION Desk or Table Installation 1. The GH3210 base unit has built-in wall mount hanger holes. There is no bracket to assemble. Simply take the base unit out of the box. 2. Plug the AC adaptor(A) cord into the 9V DC-500mA input jack on the Base unit. 3. Plug one end of the telephone cord into the TEL LINE jack on the Base unit. 4. Plug the other end of the telephone cord into the telephone wall jack. 5. Plug the AC adaptor into a standard 120V AC wall outlet. NOTE: Use only with the
Краткое содержание страницы № 13
B INSTALLATION (CONT.) Extra Charger Installation 1. Plug the AC adaptor(B) cord into the 9V DC-100mA input jack on the charger unit. 2. Plug the AC adaptor into a standard 120V AC wall outlet. NOTE: Use only the AC adaptor supplied with GH3210. B Place the telephone and power cords where they will not create a trip hazard,or where they could become chafed and create a fire or other electrical hazards. Belt clip installation Attach belt clip to the cordless handset (optional) 3 1 2 To Attach
Краткое содержание страницы № 14
INSTALLATION (CONT.) Wall Mounting 1. If using a standard wall plate, this step is not necessary. Place the Desk/ Wall bracket on the wall and mark the location of the screws. Install the screws leaving 3/16" extending out from the wall. Use anchors to secure screws. 2. To connect the Desk/Wall bracket in the wall mount position, simply align the bracket with the slots on the base until it is securely in place. A 3. Insert the AC adaptor(A) into the back of the unit. 4. Plug one end of the tele
Краткое содержание страницы № 15
INSTALLATION (CONT.) Handset Battery Charging The battery pack in the handset must be fully charged for about 10-14 hours before using the telephone. After connecting to AC power, leave the handset unused in the cradle for ten to fourteen hours. Later, it will take less time for the battery to recharge. The IN USE/ CHARGE LED on the base will be lit when the handset is in the cradle. NOTE: a. When the battery gets low, the LCD will show “BATTERY LOW” indicator, and the unit will beep every 10
Краткое содержание страницы № 16
INSTALLATION (CONT.) Handsets ID Registration 1. After base unit installation has been finished, place the handsets on the base and charger and make sure each handset is charged for 10~14 hours. NOTE: The handset which has been charged at the external charger must be placed on the main base unit for about 5 seconds to make proper ID registeration. Both of Handset 1 and Handset 2 must be placed into base for about 5 seconds. Handset 1 Handset 2 Handset 2 ( “H2”) ID registered Handset 1 (“H1”) I
Краткое содержание страницы № 17
SETUP HANDSET Overview To go to set up mode, press and hold MUTE/PRG key for 2 seconds. The following modes will be cycled by pressing MUTE/PRG key. “CONTRAST **” “RINGER ON/OFF” “RING TONE A/B” “AREA CODE” “TONE/PULSE MODE” “SET TIME”. To exit setup, press MUTE/PRG key when finished. S S C C To Set Contrast R R VOL O O L L 1. Press MUTE/PRG button to select “CONTRAST **”. L L 2. Press the or button to adjust display contrast to the desired level. The
Краткое содержание страницы № 18
SETUP HANDSET (CONT.) To Set Area Code 1. Press MUTE/PRG button to select “AREA CODE”. PROG 2. Simply enter your area code number using the number pad on the handset. AREA CODE ? 3. Press MUTE/PRG button to confirm. To Set Tone/Pulse Mode 1. Press MUTE/PRG button to select “TONE/PULSE MODE”. PROG 2. Press the or button to toggle TONE MODE and PULSE MODE. TONE MODE 3. Press MUTE/PRG button to confirm. To Set Time and Date 1. Press MUTE/PRG button to select “SET TIME”. 2. By us
Краткое содержание страницы № 19
TELEPHONE OPERATION search and select the clearest channel Digital Security System when you press the CHANNEL button.If Your GH3210 Cordless Telephone is you hear noise or other interference equipped with a digital security coding during your conversation, you can system to protect your base unit from be- manually select a clearer channel by ing accessed by other cordless pressing and releasing the CH button on telephones. the handset to switch to another spare The code allows your base and ha
Краткое содержание страницы № 20
TELEPHONE OPERATION (CONT.) Making a Call Temporary Tone Mode In Pulse dialing mode, you can access bank facilities, telephone answering machines, etc., by simply pressing the TONE(‘ ’key) to get into the tone mode and input the PAUSE required tone codes. It will reset automati- cally after you end your call. By pressing 1. If one handset is in use, the other hand- the FLASH button, you can return to the set will display “LINE IN USE” for 3 sec- pulse mode during the call. onds when TALK but
