Краткое содержание страницы № 1
4-265-636-13(1)
Digital Still Camera
Instruction Manual
DSC-TX10
Краткое содержание страницы № 2
English Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. DSC-TX10 Serial No. ______________________________ Model No. AC-UB10/UB10B Serial No. ______________________________ WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER TO REDUCE
Краткое содержание страницы № 3
� Do not handle damaged or leaking lithium ion batteries. � Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack. � Keep the battery pack out of the reach of small children. � Keep the battery pack dry. � Replace only with the same or equivalent type recommended by Sony. � Dispose of used battery packs promptly as described in the instructions. [ AC Adaptor Connect the AC Adaptor to the nearest wall outlet (wall socket). If some tr
Краткое содержание страницы № 4
[ Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: DSC-TX10 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [ CAUTION
Краткое содержание страницы № 5
For Customers in Europe [ Notice for the customers in the countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. This product has been tested and found compliant with th
Краткое содержание страницы № 6
[ Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring th
Краткое содержание страницы № 7
About water-proof, dust-proof, and shock-proof performance of the camera This camera is equipped to be water-proof, dust-proof and shock-proof. Damage caused from misuse, abuse or failure to properly maintain the camera is not covered by the limited warranty. � This camera is water-proof/dust-proof equivalent to IEC60529 IP58. The camera is operable up to a water depth of 5 m for 60 minutes. � Do not subject the camera to pressurized water, such as from a tap. � Do not use in hot springs. �
Краткое содержание страницы № 8
� Confirm that the sealing gasket and its mating surfaces have not become scratched. Even a small scratch may lead to water entering the camera. If the sealing gasket or its mating surfaces become scratched, take the camera to an authorized repair shop to 1 Sealing gasket have the sealing gasket replaced for a fee. 2 Surface contacting the � If dirt or sand gets on the sealing gasket or sealing gasket its mating surfaces, wipe the area clean with a soft cloth that will not leave behind
Краткое содержание страницы № 9
� Do not open the lens cover where the sand is whirling. Cleaning after using the camera under/near water � Always clean the camera with water after use within 60 minutes, and do not open the battery/ memory card cover before cleaning is finished. Sand or water may get inside places where it cannot be seen. If not rinsed, water-proof performance will be degraded. � Allow the camera to sit in pure water poured into a cleaning bowl for about 5 minutes. Then, gently shake the camera, press ea
Краткое содержание страницы № 10
Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM For details on advanced operations, please read “Cyber-shot User Guide” (HTML) on the CD-ROM (supplied) using a computer. Insert the CD-ROM into the CD-ROM drive. For Windows users: 1 Click [User Guide] t [Install]. 2 Start “User Guide” from the shortcut on the desktop. For Macintosh users: 1 Select the [User Guide] folder and copy [eng] folder stored in [User Guide] folder to your computer. 2 After copying is complete, double-click “
Краткое содержание страницы № 11
Identifying parts E Lens F (Playback) button G MOVIE (Movie) button H Screen/Touch panel I ON/OFF (Power/Charge) button J ON/OFF (Power/Charge) lamp K Shutter button L For shooting: W/T (Zoom) lever For viewing: (Playback zoom) lever/ (Index) lever M Hook for wrist strap N HDMI connector O Multi connector (Type3b) P Memory card slot Q Access lamp R Battery eject lever S Connector cover T Battery/memory card cover U (TransferJet™) mark V Battery insertion slot W Tripod receptacle � Use a tripod
Краткое содержание страницы № 12
Inserting the battery pack Eject lever Open the cover. 1 Insert the battery pack. 2 � While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion. Charging the battery pack For customers in the USA, Canada Power cord Power/Charge lamp (Mains lead) Lit: Charging Off: Charging finished For customers in countries/regions Flash: Charging error other than the USA and Canada GB 12
Краткое содержание страницы № 13
Open the connector cover and connect the camera and 1 the AC Adaptor (supplied), using the multi-use terminal USB cable (supplied). Connect the AC Adaptor to the wall outlet (wall socket). 2 The Power/Charge lamp lights orange, and charging starts. � Turn off the camera while charging the battery. � You can charge the battery pack even when it is partially charged. � When the Power/Charge lamp flashes and charging is not finished, remove and re-insert the battery pack. Notes � Close the cover
Краткое содержание страницы № 14
Note � Note the following points when charging via a computer: – If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not charge for an extended period of time. – Do not turn on/off or restart the computer, or wake the computer resume from sleep mode when a USB connection has been established between the computer and the camera. The camera may cause a malfunction. Before turning on/off, or restarting the computer or
Краткое содержание страницы № 15
– Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. � The battery life for movies applies shooting under the following conditions: – Movie quality: AVCHD HQ – When continuous shooting ends because of set limits (page 24), press the MOVIE (Movie) button again and continue shooting. Shooting functions such as the zoom do not operate. x Supplying power The camera
Краткое содержание страницы № 16
Inserting a memory card (sold separately) Ensure the notched corner faces correctly. Open the cover. 1 Insert the memory card (sold separately). 2 � With the notched corner facing as illustrated, insert the memory card until it clicks into place. Close the cover securely, so that the yellow mark under 3 the slide lock is hidden. � Closing the cover with the battery inserted incorrectly may damage the camera. x Memory cards that you can use Memory card For still images For movies Memory Stick
Краткое содержание страницы № 17
x To remove the memory card/battery pack Memory card: Push the memory card in once. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note � Never remove the memory card/battery pack when the access lamp (page 11) is lit. This may cause damage to data in the memory card/internal memory. Setting the clock ON/OFF (Power) Lens cover Lower the lens cover. 1 The camera is turned on. The power lamp lights up only when the camera starts up. � You can also turn on the
Краткое содержание страницы № 18
Select the desired display color, following the 6 instructions on the screen, then touch [OK]. When an [In-Camera Guide] introductory message is 7 appeared on the screen, touch [OK]. Read the waterproof precautions, then touch [OK]. 8 Shooting still images/movies Shutter button MOVIE (Movie) button Shooting still images Press the shutter button halfway down to focus. 1 When the image is in focus, a beep sounds and the z indicator lights. Press the shutter button fully down. 2 Shooting movies
Краткое содержание страницы № 19
Notes � The sound of the lens and lever operating will be recorded when the zoom function operates while shooting a movie. The sound of the MOVIE button operating may also be recorded when movie recording is finished. � Continuous shooting is possible for approximately 29 minutes at one time at the camera’s default settings and when the temperature is approximately 25°C (77°F). When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop
Краткое содержание страницы № 20
In-Camera Guide This camera contains an internal function guide. This allows you to search the camera’s functions according to your needs. Touch (In-Camera Guide). 1 � The mark will appear on the bottom right of the screen while viewing. Select a search method from [In-Camera Guide]. 2 Shoot/playback guide: Search for various operation functions in shooting/viewing mode. Icon guide: Search the function and meaning of displayed icons. Troubleshooting: Search common problems and their solution
