Краткое содержание страницы № 1
INSTRUCTION MANUAL
CCD COLOR CAMERA
IK-65WDA
Please read this manual thoroughly before use,
and keep it handy for future reference.
Record in space provided below the Model No. and
the Serial No. as found on the bottom of this unit.
Model No. IK-65WDA Serial No. ____________
Retain this information for future reference.
TABLE OF CONTENTS
Important Safeguards
1. Features & Description ·······································································4
2. Cautions ··························
Краткое содержание страницы № 2
IMPORTANT SAFEGUARDS 1. Read Instructions 12. Lightning All the safety and operating instructions should be For added protection for this video product during a read before the product is operated. lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the 2. Retain Instructions wall outlet and disconnect the power supply and The safety instructions and instruction manual should cable system. This will prevent damage to the video be retained for future
Краткое содержание страницы № 3
The CAUTION label, shown on the left, is attached on the bottom of camera. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
Краткое содержание страницы № 4
1.FEATURES & DESCRIPTION : (1) IK-65WDA has the following functions. (1) 133 Times Dynamic Range Toshiba developed algorithms that enable industry leading dynamic range (2) Digital Noise Reduction (“DNR”) Exclusive 3 Dimensional Digital Noise Reduction boosts S/N ratio to a incredible 53dB (3) 0.001Lux @ 1.2Minimum Illumination in slow shutter mode User-definable Sensitivity levels ensure best image quality reproduction dependent on available lighting conditions (4) User-Definable DAY/NIGHT Thre
Краткое содержание страницы № 5
4.PART NAMES & FUNCTIONS : 5 Dip switch settings LINE LOCK : ON/OFF IRIS : AES/DC Video output terminal WDR : ON/OFF connect to a TV monitor, etc. DN : MID / S.DN x 32 Rear View Remote terminal: Connect to keyboard AC 24V ~ /DC 12V by RS422 power terminal V PHASE: Line-Lock Phase adjustment trimmer SHUTTER / WDR / BLC GAIN / ALC / SHARPNESS WHITEBAL / ID.etc.
Краткое содержание страницы № 6
5.CONNECTIONS AND OPERATIONS : Notes on connecting • Power plugs of connected equipment must be disconnected before installations. • A 75-ohm coaxial cable (3C-2V or 5C-2V) is required for standard connection. • For details of wiring and operation of equipment to be connected, refer to their operation manuals. • Lenses, coaxial cables for video signals and the power cord are not supplied with the camera. Refer to the operations manuals of connected equipment for detailed wiring and overall opera
Краткое содержание страницы № 7
5.2 Line-Lock Control • Matching the vertical synchronization with the power frequency is called the Line-Lock. • This function is activated when the LINE LOCK switch is selected to ON. • When two or more cameras are switched by the video switcher for viewing by a moni- tor TV, the vertical sync. Phase can be locked with the power frequency, and a stable vertical sync. Is obtained without being disturbed at the time of switching. Note: • The camera is synchronized to the power frequency of 60±1H
Краткое содержание страницы № 8
5.4 Back focus adjustment: Back focus is adjusted at the factory to accom- modate most standard lenses. If a slight adjust- ment is needed, mount the lens to the camera first. Then loosen the Focus Lock Screw. Rotate the Focus ring until a clear image is achieved. Retighten the Focus Lock Screw. NOTE • When the lens weight is more than 2.2 lbs., support the camera on the lens side rather than relying on the tripod mount of the camera. 5.5 Lens This camera supports DC (direct drive) type of auto-
Краткое содержание страницы № 9
6.LINE-LOCK PHASE : When a video switcher switches two or more cameras, the picture may fluctuate on the video monitor due to the different AC line phase of each camera. In this case, adjust the V PHASE controller (on rear panel) to get a stable image. The camera is in the Line-Lock Mode. Line-Lock phase is set 0-300 degrees by adjusting the V phase control at the rear of the camera. V. PHASE CONTROLLER 7.DIP SWITCH SETTINGS : The following settings can be performed by setting the rear dip switc
Краткое содержание страницы № 10
7.4 DN (DIP4) : MID/S.DNx32 DN mode select switch. MID (ON side) : In low light conditions the IK-65WDA automatically cuts the chroma signal and boots the gain up of the luminance by 6dB. S.DN×32 (OFF side) : Under the low light condition, the IK-65WDA automatically activates the slow shutter function. FACTORY SETTINGS LINE LOCK : ON IRIS : DC WDR : OFF DN : S.DN×32 NOTE • When you change DIP 2, 3 or 4 then the present settings are displayed for about 2 seconds on the upper left side of the scre
Краткое содержание страницы № 11
8.MENU DRIVEN SET-UP : The following is the on-screen menu (“OSD”) structure for all settings and adjustments of the camera. RS422 setting menu ADDRESS 001~255 MENU PROTOCOL TOSHIBA-P TOSHIBA-D BIT-RATE 1200 2400 4800 9600 **************** VERSION EXIT DEFAULT MAIN menu (Except for DIP3 and DIP4 ON) ALC –99~99 BLC OFF AUTO UPPER2/3 LOWER2/3 CENTER1/3 CENTER1/6 SIDE1/6 GAIN STD HIGH MENU **************** ID. IDPOS OFF TOP BOTTOM EXIT CANCEL DEFAULT 11
Краткое содержание страницы № 12
ADVANCED MAIN menu (DIP3 and DIP4 ON) SHUTTER NO-D/N D/N LOW MID HIGH S. D/N x128 x64 x32 x16 x8 x4 x2 x1 WDR OFF ON ALC –99~99 BLC OFF AUTO UPPER2/3 LOWER2/3 CENTER1/3 CENTER1/6 SIDE1/6 GAIN OFF STD HIGH SHARPNESS LOW MID HIGH MENU WHITE BAL AUTO: –20~20 R: –99~99 B: –99~99 INDOOR1 B: INDOOR2 OUTDOOR ........... ID. ID. POS OFF TOP BOTTOM PTN-GEN OFF COLOR STEP GRID MULTI AWB-RNG STD WIDE DNR LOW HIGH SUPER HI-RESO OFF ON EXIT CANCEL DEFAULT 12
Краткое содержание страницы № 13
8.1 Setting switches and the functions On the side panel of the cameras there are three push button switches as shown below: Switch name Main function Select Setting mode call on/off, setting entry Setting item selection (down) Setting item selection (up) 8.2 On Screen MAIN menu (Except for DIP3 and DIP4 ON) The camera is adjusted using the On Screen Displays the present state Menu. of the rear switches. Press and hold the select switch on the side of the camera body 2 seconds until the menu
Краткое содержание страницы № 14
(4) BLC = Back light compensation Move the cursor to the position in Fig. Use the SELECT switches to select WD R -CHG D I P SW *** OFF, AUTO, UPPER2/3, LOWER2/3, CENTER1/ D/N -CHG D I P SW ***** 3, CENTER1/6, LOWER1/6 ALC LEV : 0 0 BLC AUTO Using in AES or auto iris lens, the exposure GAIN STD adjustment is automatically controlled so that ID . the best picture is obtained at next monitor .................... zone. This function is effective when strong ID - POS OFF light enters and auto iris le
Краткое содержание страницы № 15
(5) GAIN = AGC gain setting Move the cursor to the position in Fig. Use the SELECT switches to select OFF, STD, WD R -CHG D I P SW *** HIGH. D/N -CHG D I P SW ***** ALC LEV : 0 0 BLC AUTO OFF : AGC does not operate. GAIN STD STD : Standard position, max gain = 24dB ID . HIGH : High-Sensitivity position, max gain .................... = 30dB ID - POS OFF (If there is noise in low light condi- tions, set to STD.) EX I T CANCEL DE FAULT NOTE • If the SHUTTER settings are set to S.D/N (excluding X1),
Краткое содержание страницы № 16
(8) CANCEL Move the cursor to the position in fig. Press the SELECT switch to exit the menu WD R -CHG D I P SW *** D/N -CHG D I P SW without saving and changes. ***** ALC LEV : 0 0 BLC AUTO GAIN STD ID . .................... ID - POS OFF EX I T CANCEL DE FAULT (9) EXIT Move the cursor to the position in fig. Press the SELECT switch when SAVE ALL WD R -CHG D I P SW *** SETTING (excluding WDR, D/N settings) is D/N -CHG D I P SW ***** ALC LEV : 0 0 displayed to save all changes and exit the BLC AUT
Краткое содержание страницы № 17
8.3 On Screen ADVANCED MAIN menu (DIP3 and DIP4 ON) The camera is adjusted using the On Screen Menu. SHUTTER D / N : MI D Press and hold the select switch on the side WD R ON of the camera body 2 seconds until the menu ALC LEV : 0 0 appears on the monitor. The shaded area rep- BLC AUTO GAIN STD resents the option to be set. SHARPNE S S MI D (Displayed when both DIP3 and DIP4 on the WH I TE - BAL AUTO : 0 0 rear are set to ON.) NEXT EX I T CANCE L DE F AUL T (1) SHUTTER Move the cursor to the pos
Краткое содержание страницы № 18
(2) WDR = Wide dynamic range function Move the cursor to the position shown in fig. Use the SELECT switches to select OFF SHUTTER D / N : MI D or ON in the WDR setting. WD R ON ALC LEV : 0 0 When WDR is set to ON, WDR activates au- BLC AUTO tomatically. GAIN STD When WDR function is activated, the video SHARPNE S S MI D of each field is mixed. When this happens, WH I TE - BAL AUTO : 0 0 vertical resolution and the number of the frames decrease slightly. NEXT EX I T CANCE L DE F AUL T (3) ALC =
Краткое содержание страницы № 19
(7) WHITE BAL (WHITE BALANCE) Move the cursor to the position shown in fig. Use the SELECT switches to select SHUTTER D / N : MI D AUTO, MANUAL in the WHITE BAL settings. WD R ON ALC LEV : 0 0 BLC AUTO AUTO : The white balance is automatically GAIN STD adjusted corresponding to the color SHARPNE S S MI D temperature variations on the ob- WH I TE - BAL AUTO : 0 0 ject. The camera is applicable to a color temperature range of 2500- NEXT 10K. Press the SELECT switch to EX I T CANCE L DE F AUL T e
Краткое содержание страницы № 20
(10) PTN-GEN = Test pattern generator Move the cursor to the position shown in fig. ID .................... Use the SELECT switches to select OFF, COLOR, STEP, GRID, MULTI. ID - OF F POS PTN OF F -GEN AWB - STD RNG OFF : Test pattern is not displayed. DNR LOW COLOR : Color bar signal is displayed. OF F HI - RESO STEP : Gray step signal is displayed. GRID : Grid pattern signal is displayed. BACK MULTI : A simple multi-burst signal is out- EX I T CANCE L DE F AUL T put. COLOR STEP GRID MULTI N
