Краткое содержание страницы № 1
CD5220
Liquid Crystal
Customer Display
User s manual
Краткое содержание страницы № 2
CD5220 customer display INDEX 1. FEATURES 2 2. TYPE CLASSIFICATION 3 3. GENERAL SPECIFICATION 4 4. INTERFACE SPECIFICATION 6 5. FUNCTION SELECTION 12 6. COMMAND 14 7. INSTALLATION GUIDE 23
Краткое содержание страницы № 3
CD5220 customer display 1. FEATURES n Data can be displayed on 15 columns x3 lines. n Blue-green fluorescent color and large character are easy to read. n The display panel is adjustable to provide the best view angle. n Provide 2 pole for bast position installation. n The DIP switch setting emulate commands mode n CD5220/UTC/AEDEX/ADM787/ADM788/EscPOS/DSP-800 emulation command set, selected by DIP switch or control utility software. n User-defined characters can be downloaded. (for
Краткое содержание страницы № 4
CD5220 customer display 2. TYPE CLASSIFICATION CD5220 - S T 12 N PT I II III IV V VI No Type name Type name Description I Mode No. CD5220 CD5220 display CD6220 CD6220 display II Interface S Serial port(RS232c) P Parallel port(Centronics) III Base section T Rectangle base C Circular base IV Power input 05 DC5V 12 DC12V 24 DC24V V Power N no adapter adaptor 110 AC110V adapter EU AC230V adapter with EU power core UK AC230V adapter wit
Краткое содержание страницы № 5
CD5220 customer display 3. GENERAL SPECIFICATIONS NO ITEM CD5220 CD6220 1 Display method Vacuum fluorescent display 2 Number of 40 characters ( 20 columns x 2 lines) character 3 Display color blue green 4 Brightness 700 cd/m2 850 cd/m2 5 Character type 96 alphanumeric 13 kinds of international character set 1 kind of user define character 6 Character font 5 x 7 dot matrix 7 Character size 9.2mm x 6.4mm 11.2mm x 6.4mm 8 Character pitch 8.3mm 9.9mm 9 Power supply 5VDC/12VDC/24VDC 10
Краткое содержание страницы № 6
CD5220 customer display NO ITEM CD5220 CD6220 13 Viewing angle 8 - 35 degrees -5 ~ 35 degrees 14 Rotation angle Maximum 270 degrees 15 Weight 0.92 Kg 1.08 Kg 16 Environmental temperature Humidity Condition Operating : 5 - 45 C -10 - 55 C Storage 30%-85% 30%-85% 17 Applicable FCC class A ” CE standards Table 3-1
Краткое содержание страницы № 7
CD5220 customer display 4. INTERFACE SPECIFICATIONS 4.1 Communication 4.1.1 Serial port (RS232C) communication (a) The interface specification are based on EIA RS232C baud rate 9600 or 4800 bps ( select by DIP switch, refer Table 4-7) 8 data bits, none parity, 1 or more stop bits (b) Serial port (RS232C) communication flow 1. Data flow : PC/host to display, display to printer, printer to PC/host
Краткое содержание страницы № 8
CD5220 customer display buffer is full, (the buffer size is 200 bytes), then active the BUSY signal to PC/host. 4.2 Serial port interface for rectangle basic section (a) Serial port interface connector position for rectangle basic section
Краткое содержание страницы № 9
CD5220 customer display (b) Power input Connector type : DC JACK (5.5/2.1) (c) RS232C to PC/HOST connector pin assignment Connector type : D-sub 25 pin (Female) No Signal direction Function description 1 FG - Frame ground 2 TXD From printer to PC/Host Printer status data 3 RXD From PC/Host to display Receive data 4 RTS From display to PC/Host Display/printer ready signal 5 CTS From PC/Host to printer PC/Host ready signal 6 DSR From PC/Host to printer PC/Host ready signal 7 GND
Краткое содержание страницы № 10
CD5220 customer display 4.1.3 Serial port interface for circular base (a) Power connector of Power cable Connector type : DC jack (5.5/2.1 ) (b) RS232C interface to PC/HOST cable, PC/HOST side connector pin assignment Connector type : D-sub 9 pin (Female) No Signal direction Function description 1 FG - Frame ground 2 TXD From printer to PC/Host Printer status data 3 RXD From PC/Host to display Receive data 4 DSR From PC/Host to printer PC/Host ready signal 5 GND - Signa
Краткое содержание страницы № 11
CD5220 customer display 4.3 Parallel port (Centronic) interface for circular base (a) Power connector of Power cable Connector type : DC jack (5.5/2.1 ) (b)Parallel interface to PC/HOST cable, PC/HOST side connector pin assignment Connector type : D-sub 25 pin (Male) No Signal Name Direction Function description 1 /STB Input Strobe signal to read data 2-9 Data0 - Input Parallel signal data Data7 10 /ACK Output Data request signal 11 BUSY Output BUSY state from the displ
Краткое содержание страницы № 12
CD5220 customer display
Краткое содержание страницы № 13
CD5220 customer display 5. FUNCTION SELECTION 5.1 Baud rate SW number SW1 Function description Baud rate） bps OFF 9600 ON 4800 Table 5-1 notes: SW1 is ignores when baud rate is store to EEPROM (EEPROM type only), baud rate will be refer the EEPROM baud rate status. 5.2 International character set SW number Function description SW2 SW3 SW4 SW5 International Code table character set(code (code 80H-FFH) 20H-7FH) OFF OFF OFF OFF U.S.A. PC-437 (USA,standa
Краткое содержание страницы № 14
CD5220 customer display Table 5-2 5.3 Command type select SW number Function description Software defined SW6 SW7 SW8 Command type Hex code OFF OFF OFF CD5220 07 ON OFF OFF UTC/S 06 OFF ON OFF UTC/P 05 ON ON OFF AEDEX 04 OFF OFF ON ADM 787 03 ON OFF ON ADM 788 02 OFF ON ON ESC/pos 01 ON ON ON DSP800 00 Table 5-3
Краткое содержание страницы № 15
CD5220 customer display 6. COMMAND 6.1 CD5220 standard mode command list Command Code description(hex) Function description ESC DC1 1B 11 overwrite mode ESC DC2 1B 12 vertical scroll mode ESC DC3 1B 13 horizontal scroll mode ESC Q 1B 51 41 [n ]x20 0D set the string display mode, A ..........CR write string to upper line ESC Q 1B 51 42 [n ]x20 0D set the string display mode, B ..........CR write string to lower line ESC Q 1B 51 44 [n ]xm 0D upper line message scroll D ..........CR m<
Краткое содержание страницы № 16
CD5220 customer display Command Code description Function description (hex) CLR 0C clear display screen , and clear string mode CAN 18 clear cursor line, and clear string mode ESC * n 1B 2A n brightness adjustment 1<=n<=4 ESC & s n m 1B 26 1 n m define download characters. [a (p1..pa)]x [a(p1..pa)]x (m-n+1) a=1-5 (m-n+1) 20
Краткое содержание страницы № 17
CD5220 customer display G GERMANY W SWEDEN J compliance with JIS code I ITALY D DENMARK I R compliance with RUSSIA code J JAPAN E DENMARK II L compliance with SLAVONIC code U U.K. L SLAVONIC F FRANCE R RUSSIA S SPAIN reserved 6.2 UTC standard mode command list Command Code description Function description (hex) BS 08 back space HT 09 horizontal tab LF 0A line feed CR 0D carriage return DLE 0F display position DC1 11 over write display mode DC2 12 vertical scroll mode DC3 13 c
Краткое содержание страницы № 18
CD5220 customer display ESC u I ....CR 1B 75 49 [ data x two line display 40]0D ESC RS CR 1B 0F 0D change to UTC standard mode Table 6-5
Краткое содержание страницы № 19
CD5220 customer display 6.4 AEDEX mode command list Command Code description Function description (hex) ! # 1 ....CR 21 23 31 [data x 40]0D upper line display ! # 2 ....CR 21 23 32 [data x 40]0D bottom line display ! # 4 ....CR 21 23 34 [data x 40]0D upper line message scroll continuously ! # 5 ....CR 21 23 35 hh ’: mm 0D display time h,m=’0 -’9 ! # 6 ....CR 21 23 36 [data x 40]0D upper line message scroll once pass ! # 8 ....CR 21 23 38 n m 0D change attention code
Краткое содержание страницы № 20
CD5220 customer display 6.6 DSP-800 mode command list Command Code description Function descriptions (hex) EOT SOH I n ETB 04 01 49 n 17 select international character set. EOT SOH P n ETB 04 01 50 n 17 move cursor to specified n=31-58 position. EOT SOH C n m 04 01 43 n m 17 clear display range from n ETB 31<= n<=m<=58 position to m position and move cursor to n position. EOT SOH S n ETB 04 01 53 n 17 save the current displaying data n=31-35 to n layer for demo disp
