Краткое содержание страницы № 1
Internal Use Only
North/Latin America http://aic.lgservice.com
Europe/Africa http://eic.lgservice.com
Asia/Oceania http://biz.lgservice.com
LED TV
SERVICE MANUAL
CHASSIS : LA31R / LD31S
MODEL : 29LN45** 29LN45**-Z*
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
P/NO : MFL67862501 (1304-REV00) Printed in Korea
Краткое содержание страницы № 2
CONTENTS CONTENTS .............................................................................................. 2 SAFETY PRECAUTIONS ........................................................................ 3 SERVICING PRECAUTIONS ................................................................... 4 SPECIFICATION ...................................................................................... 6 ADJUSTMENT INSTRUCTION ............................................................... 9 TR
Краткое содержание страницы № 3
SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. General Guidance Leakage Current Hot Check
Краткое содержание страницы № 4
SERVICING PRECAUTIONS CAUTION: Before servicing receivers covered by this service 2. After removing an electrical assembly equipped with ES manual and its supplements and addenda, read and follow the devices, place the assembly on a conductive surface such as SAFETY PRECAUTIONS on page 3 of this publication. aluminum foil, to prevent electrostatic charge buildup or expo- NOTE: If unforeseen circumstances create conflict between the sure of the assembly. following servicing precautions and any
Краткое содержание страницы № 5
IC Remove/Replacement 3. Solder the connections. Some chassis circuit boards have slotted holes (oblong) through CAUTION: Maintain original spacing between the replaced which the IC leads are inserted and then bent flat against the cir- component and adjacent components and the circuit board to cuit foil. When holes are the slotted type, the following technique prevent excessive component temperatures. should be used to remove and replace the IC. When working with boards using the familiar r
Краткое содержание страницы № 6
SPECIFICATION NOTE : Specifications and others are subject to change without notice for improvement. 1. Application range 3. Test method This specification is applied to the LED TV used LA31R / 1) Performance: LGE TV test method followed LD31S chassis. 2) Demanded other specification - Safety : CE, IEC specification - EMC : CE, IEC 2. Requirement for Test Each part is tested as below without special appointment. 1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C 2) Relative Humidit
Краткое содержание страницы № 7
No. Item Specification Remarks Analogue TV 1) PAL-BG Analogue TV : (RF) VHF: E2 to E12, UHF : E21 to E69 2) PAL-DK (CATV) S1 to S20, HYPER: S21 to S47 3) PAL-I/I’ 4) SECAM-BG Digital TV : VHF, UHF 5) SECAM-DK 2 Broadcasting system 6) SECAM L/L’ Satellite TV : VHF, UHF, C-Band, Ku-Band Digital TV 1) DVB-T/C/T2 * DVB-T2 ( T2 model only support ) * DVB-S/S2 (Satellite model only support ) Satellite Digital TV 1) DVB-T/C/S/S2 ► DVB-T - Guard Interval(Bitrate_Mbit/s)B : 1/4, 1/8, 1/16, 1/32 - Modulat
Краткое содержание страницы № 8
5. Timing 5.1. RGB/HDMI (PC) Specification No. Remark Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) 1. 720*400 31.468 70.080 28.321 2. 640*480 31.469 59.940 25.175 3. 640*480 37.500 75.000 31.500 4. 800*600 37.879 60.317 40.000 5. 800*600 46.875 75.000 49.500 6. 1024*768 48.363 60.004 65.000 7. 1024*768 60.023 75.029 78.750 8. 1280*800 49.702 59.810 83.500 9. 1366*768 47.717 59.79 85.5 5.2. HDMI (DTV) Specification No. Remark Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) 31.469 59.94
Краткое содержание страницы № 9
5.3. Component Specification No. Remark Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) 1. 720*480 15.730 59.940 13.500 SDTV, DVD 480I(525I) 2. 720*480 15.750 60.000 13.514 SDTV, DVD 480I(525I) 3. 720*576 15.625 50.000 13.500 SDTV, DVD 576I(625I) 50Hz 4. 720*480 31.470 59.940 27.000 SDTV 480P 5. 720*480 31.500 60.000 27.027 SDTV 480P 6. 720*576 31.250 50.000 27.000 SDTV 576P 50Hz 7. 1280*720 44.960 59.940 74.176 HDTV 720P 8. 1280*720 45.000 60.000 74.250 HDTV 720P 9. 1280*720 37.500 50.000 7
Краткое содержание страницы № 10
ADJUSTMENT INSTRUCTION (4) C lick “Read” tab, and then load download file(XXXX.bin) 1. Application Range by clicking “Read”. This document is applied to LA31R / LD31S chassis LED TV which is manufactured in TV(or Monitor) Factory or is (4) produced on the basis of this data. filexxx.bin 2. Designation (1) The adjustment is according to the order which is designated and which must be followed, according to the plan which can be changed only on agreeing. (2) Power adjustment : Free Voltag
Краткое содержание страницы № 11
3.1. EDID Process 3.2. Function Check 3.1.1. EDID download 3.2.1. Check display and sound (1) Press "Power only" key of service remote control. *Check Input and Signal items. (cf. work instructions) (2) Press the ADJ KEY on R/C and enter EZ ADJUST (1) TV (3) Enter EDID D/L mode by pushing "►" key at "11. EDID D/L". (2) AV (SCART/CVBS) (4) EDID download is executed automatically. (3) COMPONENT (480i) (5) Press EXIT key on service remote control. (4) RGB(PC : 1366 x 768 @ 60Hz) EZ ADJUST (5) HDM
Краткое содержание страницы № 12
4. Total Assembly line process 4.1. Tool option & ADC Check (1) Press "Power on" key of service remote control. (2) Connect USB Port → USB to Serial Adapter (UC-232A) → RS-232C cable → PC(RS-232C port) (3) Check the 'Tool Option'(Refer to the BOM Comments or Adjustment spec) (4) Check the ‘ADC’ is ok. => Check the Download to CI+ Key value in LG set. (1) Check the method of CI+ Key value 1) Check the method on Instart menu 4.2. Model name & Serial number download 2) Check the method of RS2
Краткое содержание страницы № 13
4.3. Function Check 4.4. White balance adjustment - Equipment 4.3.1. Check display and sound ■ Check Input and Signal items. (cf. work instructions) (1) Color Analyzer: CA-210 (LED Module : CH 14) 1) TV (2) Adj. Computer(During auto adj., RS-232C protocol is 2) AV (SCART/CVBS) needed) (3) Adjust Remote control 3) COMPONENT (480i) 4) RGB(PC : 1366 x 768 @ 60Hz) 5) HDMI(PC : 1366 x 768 @ 60Hz) RGB Gains are fixed data for each model. 6) PC Audio In Insert RS-232C Jack which is connected with PC
Краткое содержание страницы № 14
4.5. DPM Operation check ■ Measurement Condition: 100~240V@ 50/60Hz (1) Set Input to RGB-PC and connect D-sub cable to set - RGB Mode. Set Input to HDMI(with Input Label set to PC) and connect HDMI cable to set - HDMI Mode (2) Cut off H sync or V sync of signal. (3) Check DPM operation refer to the below table. Operating Condition Sync(H/V) Video LED(SET) Wattage(W) Sleep mode - Power S/W On Off/Off Off Amber 1 RGB, HDMI ■ HDMI DPM Operating condition - Input Label: HDMI (PC&DVI Mode) MHL C
Краткое содержание страницы № 15
TROUBLE SHOOTING 1. No Power N N Check Power connector Check C820 All Replace Adapter OK ? Voltage Level (19V) Y N Check IC809 Output Replace IC809 Voltage Level (3.3V_ST) Y N Replace IC802 & Check IC802 output Recheck Voltage Level (12V) Y N Check IC800 Output Replace IC800 Voltage Level (5V) Y N Check IC810 Output Replace IC810 Voltage Level (2.5V) Y N Check IC806 Output Replace IC806 Voltage Level (1.15V) Y N Check IC807 Output Replace IC807 Voltage Level (1.5V) Y N Check X201
Краткое содержание страницы № 16
2. No Picture N N Check IC101 Check WLED_ENABLE high Module Replace Main Scaler IC R131 Back Light On ? Y Y N Check LED Driver IC1100 Check LED Driver output (LED Driver B’d P1100 #1) Replace LED Driver IC Check Panel power N P601(#27,28,29,30) 12V Replace IC804 IC804Output 12V Y N Check IC101 Check Panel clock Repair Main B/D P601(#9,10) Y N Check FFC Cable for damage Replace Cable or open conductors. Y Replace T-con Board or module 3. No Video - Digital TV (1) 29LN45*U / 29LN45*R Check RF
Краткое содержание страницы № 17
(2) 29LN45*3/29LN45*B Check RF Cable Y N 1. Check Tuner(TU3702 #5) Power (3.3V) Replace IC803 2. Check IC803 Output voltage(3.3V) Y N 1. Check Tuner(TU3702 #7) Power (1.8V) Replace IC805 2. Check IC805 Output voltage(1.8V) Y N Check Tuner(TU3702) I2C Signal Check IC101 SCL(R3735), SDA(R3736) Y N Check Tuner(TU3702) Replace Tuner(TU3702) Data, CLK, SYN, VAL Recheck (3) 29LN45*5 Check RF Cable Y N 1. Check Tuner(TU2601 #5) Power (3.3V) Replace IC803 2. Check IC803 Output voltage(3.3V) Y N 1. C
Краткое содержание страницы № 18
4. No Video - Component Check input signal format Is it supported? Y Wave form of Comp Y Wave form of Comp Pb Wave form of Comp Pr Check Component Cable Y N Replace JK2800 or Check JK2800 Check Device Y Check signal N Replace R239,R237,R241 R239,R237,R241 C220,C218,C222 C220,C218,C222 Y IC101 has problem Wave form of C218 Wave form of C222 Wave form of C220 5. No Video - RGB Check input signal format Is it supported? Check RGB Cable N Replace JK400 or Check JK400 Check Device Y N Check Hsync,
Краткое содержание страницы № 19
6. No Video - HDMI Check input signal format Is it supported? Y Check HDMI Cable for damage or open connector Y N Check JK501 Replace connector for proper connection or damage Y N Check I2C Signal (JK501) Re download EDID data (#15, #16) Y N Replace Scaler(IC101) Check HDCP Key (IC101) 7. No Audio Make sure you can’t hear any audio and Device support the audio signal normally. Y Check Speaker and N Replace connector or Speaker its wire connection (P700) and the resistance Y N Check R879 V
Краткое содержание страницы № 20
BLOCK DIAGRAM Copyright © LG Electronics. Inc. All rights reserved. LGE Internal Use Only - 20 - Only for training and service purposes Panel SERIAL System Option DDR3: 800MHz Flash EEPROM CI_ADDR[0~14] EEPROM SCL & SDA Option(Only for DVB) DDR3 SDRAM REG DMB DDR3 SDRAM (1GB) LVDS CI_OE [LED Driver IC] 2GB NAND Flash CI_IORD PCM_DATA [0~7] 1 Ch 1GB CI_IOWR CI-WE DDR2 Data[0:15] DDR2 Data[0:15] SPI_CK CI ADDR[0~7] F_RB PCMCIA Slot WLED-Status SPI_CI DDR2 DDR2 PF-OE WLED_ENABLE SPI_CS OVP_SEL
