Краткое содержание страницы № 1
SyncMaster NC220P
LED Monitor
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Краткое содержание страницы № 2
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 INSTALLING THE PRODUCT Package Conte
Краткое содержание страницы № 3
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) . . . . . . . . . . . . . . . . . . 6-4
Краткое содержание страницы № 4
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual ICON NAME MEANING Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section. Copyright Notice The contents of this manual are subject to change without prior notice for performance im
Краткое содержание страницы № 5
1-2 Care and Maintenance External Surface and Screen Maintenance Clean the product with a soft, damp cloth. • Do not clean the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Do not scratch the screen with your fingernails or a sharp object. This may result in scratches or damage to the product. • Do not clean the product directly by spraying water onto the product. If water enters the product, it may resu
Краткое содержание страницы № 6
1-3 Cleaning the Monitor Cleaning the Monitor • The panel and exterior of the cutting-edge monitor scratch easily and require careful attention. Clean the monitor according to the following steps. 1. Power off the monitor and PC. 2. Disconnect the power cable from the monitor. To avoid electric shock, be sure you disconnect the cable by gripping the plug and do not touch the cable with wet hands. 3. Wipe the monitor using a soft, slightly damp cloth that has been squeezed . • Do not use a
Краткое содержание страницы № 7
1-4 Safety Precautions Icons used for safety precautions ICON NAME MEANING Failing to follow the precautions marked with this sign, may result in a serious injury or Warning even a fatality. Failing to follow the precautions marked with this sign, may result in a personal injury or Caution property damage. Meaning of Signs Do not perform. Must be followed. Installation Related Warning AVOID PLACING BURNING CANDLES, Ask an installation engineer or relevant MOSQUITO-REPELLENT OR CIGARETTES c
Краткое содержание страницы № 8
Caution Do not let the product drop while moving it. Do not place the product face down on the floor. • This may result in a problem with the product or injury. • This may damage the panel of the product. When installing the product on a console or When putting the product down, handle it shelf, make sure that the front of the product gently. does not protrude out of the console or shelf. • Otherwise, it may result in a problem with • Otherwise, this may cause the product to the product or
Краткое содержание страницы № 9
Avoid moving the product by pulling the power When a gas leak occurs, do not touch the cord or antenna cable. product or the power plug and ventilate immediately. • Otherwise, it may result in electric shock, fire or a problem with the product due to • A spark may result in an explosion or fire. damage to the cable. Avoid lifting up or move the product by holding Avoid using or placing inflammable spray or only the power cord or signal cable. objects near the product. • Otherwise, it may res
Краткое содержание страницы № 10
Do not let water enter the DC power device Avoid turning the product upside down or move or get the device wet. the product holding only the stand. • An electric shock or fire may result. • This may cause the product to fall resulting in damage to the product or injury. • Avoid using the product outdoors where it can be exposed to rain or snow. • Be careful not to get the DC power adapter wet when you wash the floor. Do not put the DC power adapter near to Avoid using a humidifier or cooker
Краткое содержание страницы № 11
2 Installing the Product 2-1 Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the product at a later stage. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items. Monitor CONTENTS Quick Setup Guide Warranty Card User Manual DC-DC converter (UPoE PD Adapter) (Not available in all locations) Stand base LAN cable (length: 300mm) Ferrite Core (1EA
Краткое содержание страницы № 12
2-2 Installing the Stand Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Turn the stand in the direction indicated by the arrow. Insert the stand base into the stand in the direction of the arrow. Do not remove the fixing pin until you are finished attaching the stand. Tightly fasten the screw to the bottom of the base. After installing the stand, place the product upright. You can remove the fi
Краткое содержание страницы № 13
2-3 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. • To adjust the height, remove the fixing pin. • The monitor tilt and height can be adjusted. • Hold the top center of the product and adjust the height carefully. 2-3 Installing the Product
Краткое содержание страницы № 14
2-4 Rotating the Monitor Screen You can rotate your monitor as shown below. • Be sure to fully extend the stand before rotating the monitor. • If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the floor and get damaged. • Do not rotate the monitor counterclockwise. The monitor may get damaged. Installing the Product 2-4
Краткое содержание страницы № 15
2-5 Installing a Wall-mount Kit or Desktop Stand Before Installation Place a protective cloth or cushion on a flat Unfasten the screw from the back of surface. Next, place the product with the face Lift and detach the stand. the product. down on top of the cloth or cushion. Installing a Wall-mount Kit or Desktop Stand Attach the wall-mount kit or desktop stand here Bracket (sold separately) Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding p
Краткое содержание страницы № 16
2-6 Connecting to your Network The connecting part may differ depending on the product model. • It is not supported when the network speed is below or equal to 10Mbps. • Use Cat5(*STP Type) cable for the connection. *Shielded Twist Pair Attach the DC-DC converter (UPoE PD) to the back of the product. - Push the adapter until you hear a “click.” Connect the LAN cable (connected to the PSE device) to the [LAN] port on the right side of the UPoE PD adapter. Connect the power cable (conne
Краткое содержание страницы № 17
• Ferrite Core for LAN cable : The ferrite cores are used to shield the cables from interference. When connecting the ferrite core to a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure. • : One ferrite core should be no more than 2 inches from the end of the LAN cable that is inserted into the product. 2-6 Installing the Product
Краткое содержание страницы № 18
2-7 Connecting to another Monitor The connecting part may differ depending on the product model. • Connect between the [DVI OUT] port on the product and the DVI port on your monitor using a DVI cable. You can connect more monitors via [DVI OUT]. (For presentation purposes). Installing the Product 2-7
Краткое содержание страницы № 19
2-8 Connecting a SERIAL Cable • Devices which support RS-232C connection (interface) can be connected. 2-8 Installing the Product
Краткое содержание страницы № 20
2-9 Connecting with a PC The connecting part may differ depending on the product model. • Connect the [RGB IN] port of the product to the D-Sub port of your PC with a D-Sub cable. Use the [RGB IN] port to directly connect the monitor to a PC. Installing the Product 2-9
