Краткое содержание страницы № 1
Galaxy 2-44
User Guide
Honeywell Security
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Table of Contents Table of Contents .............................................................. iii Introduction .........................................................................................1 Controlling Your Alarm System ..........................................................2 Users .................................................................................................................................... 2 Groups .......................................................
Краткое содержание страницы № 4
iv
Краткое содержание страницы № 5
Introduction The Galaxy 2-44 is a programmable alarm control panel that will allow you to protect your home or business by providing secure and reliable intruder detection. The system can be fully tailored by your installer to operate in the most convenient way for your lifestyle or working practice. If there are any changes in your requirements, your installer will be able to make any necessary changes to the system configuration in order to continue to provide the best protection whilst mainta
Краткое содержание страницы № 6
Controlling Your Alarm System Users Each person who uses the system is described as a ‘User’ and can have their own unique identity, in the form of a PIN code, prox tag or wireless keyfob, or a combination of all 3. Different users can have a different level of access to the alarm system functions. All this can be set up in the user programming section described later. The control panel can be controlled in one of 3 ways: 1. By entering a PIN code at a keypad and pressing function buttons. 2. B
Краткое содержание страницы № 7
Keypads There are two types of keypad available as shown below but both work in a similar manner. The number buttons are for entering PIN codes and for changes options. The function keys down the side have the following use: A>: This scrolls forward in a list or menu and activates a FULL set. B<: This scrolls backwards in a list or menu and activates a PART or NIGHT set. ent: This saves a current setting or activates the currently displayed command. esc: This aborts an operation or escapes back
Краткое содержание страницы № 8
Wireless Keyfobs Keyfobs are portable controllers that can be attached to a key ring. They will allow you to Set and Unset the system by a single press of a button and can some- times be programmed with additional functions. Because they operate by radio, they can be used anywhere around the premises provided that they are within range of the installed radio receiver. NOTE: Labels are provided to place over the buttons to indicate the function. Setting the System — Full Set To set the system, m
Краткое содержание страницы № 9
Setting the System — Part or Night Set Part and Night setting are similar to Full setting but leave off certain detectors as agreed with your installer. Additionally, the system can be programmed by the installer not to give any exit timer tones during the setting period (silent set). To Part or Night set: Keypad: Wireless Keyfob: Prox Tag: Type your PIN code Press the [Lower Left] Use the keypad for Part then press [B]. button (Part) or or Night setting. Press [1] Part Set or Press the [Lower R
Краткое содержание страницы № 10
Cancelling System Setting The Full, Part and Night setting routines can be cancelled, before the system sets, by pressing the esc key on the keypad used to begin the setting routine. To cancel the setting routine on another keypad, type in your user PIN code and press A> or ent. Unsetting To unset the system, enter the protected area by the agreed route. A timed entry period will begin and a pulsed tone will sound. Keypad: Wireless Keyfob: Prox Tag: Type your user code Press the [OFF] button. Ho
Краткое содержание страницы № 11
Setting and Unsetting With Group Choice With group choice, setting is initiated as normal, using a code, tag or fob. However, a choice of groups will then be displayed along with the current status of each group. The status can be changed for each group by pressing the appropriate number button and the display will cycle through the possible options. S = SET SET SET SET SET SET 123 123 123 123 123 U = UNSET GROUPS GROUPS SUU SUU GROUPS GROUPS GROUPS SUU SUU SUU Pressing the ent key will implemen
Краткое содержание страницы № 12
Menu 11 - Omit Zones This function allows a user to temporarily disable a detection zone from the system (for example, to disable a movement detector when a dog is left in the house). Zone omits last for one set period only and automatically switch off when the system is unset. On entering the menu option, the first omittable zone is displayed. The A> and B< scroll keys can be used to select the different zones in turn. To omit a particular zone, scroll to the zone so that it is displayed on scr
Краткое содержание страницы № 13
Menu 22 - View Log This option displays the system event log. The log records all events that occur in the system and is vital for tracing the chain of events during a break-in or when trying to trace a fault. On entering the option, the most recent event is displayed on screen in the following format: Event Time Date 09:51 09:51 09:51 01/08/04 01/08/04 01/08/04 09:51 09:51 01/08/04 01/08/04 1021+ 1021+ 1021+ 1021+ 1021+ Intruder Intruder Intruder Intruder Intruder Event Source Event Type Pressi
Краткое содержание страницы № 14
Menu 31 - Walk Test This menu allows the zones to be manually tested. There are two sub-options to this function as follows: 1 = Test all Zones This puts all omittable zones into walk test immediately. 2 = Test Selected Zones This allows the user to select specific zones to be put into test. On selecting the option, the first zone is displayed with the zone number and description on the top row. On the bottom row, the test status is displayed. If the # key is pressed that zone is selected for te
Краткое содержание страницы № 15
01 01 01 01 01 User 1 User 1 User 1 User 1 User 1 *1234 *1234 *1234 *1234 *1234 User(L2) User(L2) User(L2) User(L2) User(L2) The A> and B< keys are used to select the user to be edited. Pressing ent will show the options for that user, starting with the PIN option. Again, the A> and B< keys can be used to move between the options. Pressing the ent key allows the displayed option to be modified. Most users can only access the PIN option. Only Master users can access the other functions. The pro
Краткое содержание страницы № 16
7 = Duress The duress function, when enabled, forces a panic signal to be sent to the monitoring station each time the user PIN, fob or tag is used. Duress codes should only be used in emergency situations when there is a threat to life. Menu 44 - Mobile Numbers This option allows the SMS text messaging feature to be altered. The system can send event messages to up to 3 mobile phones by text messaging. The type of events that are sent can be individually selected for each of the three mobile ph
Краткое содержание страницы № 17
Zone Reference Table RE IO00ZN ONFN UNCTIODE ESCRIPTIOCT HIMOT MI PAR 1001 1002 1003 1004 RIO01 1011 1012 1013 1014 1015 1016 1017 1018 Installer Details NAME ADDRESS TELEPHONE OFFICE HOURS OTHER TIMES ACCOUNTNO. 13
Краткое содержание страницы № 18
© Copyright Honeywell Security IU1-0032 Rev 1 14
