Руководство по эксплуатации Marmitek MS9470

Руководство по эксплуатации для устройства Marmitek MS9470

Устройство: Marmitek MS9470
Категория: Домашняя система защиты
Производитель: Marmitek
Размер: 1.11 MB
Добавлено: 12/17/2013
Количество страниц: 36
Печатать инструкцию

Скачать

Как пользоваться?

Наша цель - обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства Marmitek MS9470. Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с Marmitek MS9470.

Для Вашего удобства

Если просмотр руководства Marmitek MS9470 непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

  • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции Marmitek MS9470 на полном экране, используйте кнопку Полный экран.
  • Скачивание на компьютер - Вы можете также скачать инструкцию Marmitek MS9470 на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
Marmitek MS9470 Руководство по эксплуатации - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Печатная версия

Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше - Печатать инструкцию. Вам не обязательно печатать всю инструкцию Marmitek MS9470 а только некоторые страницы. Берегите бумагу.

Резюме

Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для Marmitek MS9470. Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

Краткое содержание
Краткое содержание страницы № 1

MS9470/MS9770/MS9970
SECURITY AND HOME AUTOMATION SYSTEM
MS9470/MS9770/MS9970 MARMITEK NICOSHOP

Краткое содержание страницы № 2

INTRODUCTION Congratulations! You purchased a Marmitek Security System. Marmitek phone on the other end responds to the alarm message by pressing a single Security Systems are quality products and are manufactured with high digit on that telephone. This will stop further dialling and allows the person precision. who picked up the phone to “listen-in“ to the protected premises by means of the built-in microphone of the Security Console SC2800. Failing sensors The Marmitek Security System protects

Краткое содержание страницы № 3

1 GENERAL • Marmitek systems are designed for use in dry environments. • Avoid placement of system components in environments with extreme temperatures (normal operation is 0-40°C) or humidity. • Only the supplied PS500 Mains Adapter can be used to power the SC2800 base station and preferably alkaline batteries should be used for the sensors and remote. Do not use rechargeable batteries! • Marmitek equipment is CE approved, and has radio transmission approvals for most countries. • Always carefu

Краткое содержание страницы № 4

3 MARMITEK SYSTEMS 3.1 COMPONENTS MARMITEK SYSTEMS CONSIST OF THE FOLLOWING PARTS: 1 1 SC2800 SECURITY CONSOLE (BASE STATION) 4 2 PS500 MAINS ADAPTOR* 3 MS10 MOTION SENSORS 3 4 DS10 DOOR/WINDOW SENSORS 5 KR21 KEY FOB REMOTE CONTROL 6 WALL MOUNTING BRACKET FOR SC2800* SECURITY CONSOLE 7 SH624 SYSTEM REMOTE CONTROL (OPTIONAL FOR MS9470) 8 LM12 LAMP MODULE (OPTIONAL FOR MS9470) 9 BREAKING GLASS DETECTOR (OPTIONAL) 5 8 10 SET OF ACCESSORIES: BATTERIES, 9 TELEPHONE CABLES (ANALOG AND ISDN), 7 WIRED S

Краткое содержание страницы № 5

4 INSTALLATION OF THE COMPONENTS 4.1 SIGNALS AND RANGE Your security system is using various messages and ignore interfering signal from During an alarm situation, an eventual telephone communication techniques. For a good mobile phones, wireless headsets, other security call will be disconnected. understanding of these, it is recommended to systems, etc. read through the short explanation given below. In case of a analog PABX with multiple telephones: Over existing mains wiring: Connect the SC2

Краткое содержание страницы № 6

12 4.2 1 THE SC2800 6 13 BASE STATION 2 9 3 1. PANIC 7 When pressed, this red button initiates an 14 8 immediate alarm. 15 4 16 2. ARM HOME 5 Alarm function when being at home. Only door and window sensors (no motion sensors) are 10 activated. 11 17 3. ARM AWAY All sensors are activated. 4. BYPASS 23 When you want to arm the system and one of the sensors is reporting a problem (e.g. window is still open, battery low, etc.), you can choose to arm the system without activating this particular sens

Краткое содержание страницы № 7

13. ENTER 21. TELEPHONE CONNECTION mounting hole and reposition the plastic tube Used for confirmation of the system settings For connecting the system to the telephone line over the antenna wire. during installation. (meant for analog lines; for ISDN and PABX, refer to 4.1). Always use the supplied cable. CONNECTING THE PS500 MAINS ADAPTER 14. TIME OFF Connect the DIN plug into the socket at the back Used to set the Lifestyle mode. When pressing this 22. CONNECTION MAINS ADAPTOR of the base sta

Краткое содержание страницы № 8

4.3 DS10 DOOR/WINDOW SENSORS 6 4. MAGNETIC CONTACTS (NOT SHOWN) For metal frames, the distance between contact 1 The magnetic contacts are of the NC (Normally and magnet can not be more than 3mm when Closed) type. The distance between magnet and door or window is in closed position. For wooden contact can not be more than 5mm. When frames this distance is 8mm, but in all cases the mounted, you have to make sure that the arrows opening should be kept to the minimum. To on magnet and contact line

Краткое содержание страницы № 9

door or window and the sensor will instantaneously become part of the system again. In case this does not work (e.g. the batteries have been low for too long), you have to re-install this sensor. You first have to erase this specific zone (refer to 5.9) and re-install the sensor (refer to 5.1). 4.4 MS10 MOTION SENSORS 3. CODE to test the detection range of the sensor. When 4 By pressing this key, the sensor gets a new code (1 the key is pressed again the detector returns to its out of 65.536). n

Краткое содержание страницы № 10

4.5 KR21 KEY CHAIN REMOTE CONTROLS 1 CONTROLS: module set to the Home Automation base address (refer to 6.8). 2 3 1. CONTROL INDICATORS Comes on when the remote control sends a radio 7 + 8 PANIC signal when keys are pressed. When the indicator When both red keys are pressed simultaneously, 4 5 blinks only weakly, the batteries have to be an immediate alarm will be initiated by the replaced. security system. 7 2. ARM 9. BATTERY HOLDER Switches on the security system in the Arm Away The battery ho

Краткое содержание страницы № 11

1 2 DISARM: Switches off the security system. key. (e.g. living room lamp, TV, garden lights, etc.). ALL LAMPS ON: for switching on all lamp modules with one press of a button. 8. BATTERY COMPARTMENT (BACK COVER) ALL LAMPS OFF: for switching off all (lamp and appliance) modules with one press of a button. INSTALLATION: 3 MODE SWITCH IN POSITION 1: 1. PLACING THE BATTERIES 1…8: For controlling Marmitek X-10 Home IMPORTANT: When placing the batteries, make Automation modules with corresponding add

Краткое содержание страницы № 12

At the front of the modules, you’ll find 2 code called Marmitek X-10 protocol. In combination For more information about the many options of switches: Unit Code (1 through 16) and House with Marmitek X-10 modules, you can remotely the Marmitek X-10 system, contact the web site Code (A through O). Take care that when you are control lights and appliances. (www.marmitek.com) or your dealer. using the modules in combination with the security system, the House Code of the base Also in case of an ala

Краткое содержание страницы № 13

7 Controls 2 Activating the GB 10 4 Open the battery-compartment at the front side 1 Battery Indicator of the unit. When pressing the TEST key or when a signal is Press the TEST key for longer than one second. transmitted, the indicator light will blink. If it only The red indicator light will flash twice. lights up weakly, the battery needs to be replaced. 3 Registering the sensor with your security system 3 2 2 TEST key Set the mode switch on the security console to Used for setting the GB 10’

Краткое содержание страницы № 14

4.10 DIGIMAX 210 WIRELESS THERMOSTAT (OPTION) The RF DigiMax 210 thermostat does not need will turn On or Off the X10 module connected to any extra wiring and works within 30 meters the boiler depending of the ambient temperature range. It is equipped of a and the comfort set point. secured RF code which the SC2800 base station will learn during the installation process. This When the console is in "Arm Away" mode, the code will assure that setback differential to the comfort set point is the M

Краткое содержание страницы № 15

5.PROGRAMMING THE SC2800 BASE STATION 5.1 REGISTRATION OF RADIO SENSORS Every sensor must be installed or registered with the base station. In this way, the base station recognises only its own sensors. Up to 16 sensors can be registered on the SC2800. One of those 16 can be a wired sensor connected to the input jack at the back of the base station. Each sensor registered by the base station occupies one zone. You can choose to register the sensors automatically on the next available unoccupied

Краткое содержание страницы № 16

5.2 REGISTRATION OF WIRELESS REMOTE CONTROLS Up to 8 remote controls can be registered with the base station (KR21 and SH624). Every time you press a key you hear a short confirmation beep. 1. Set mode switch to the INSTALL position: All indicators of occupied zones come on 2. Press an alarm key (e.g. DISARM) of the first remote control (e.g. KR21): No extra zones are occupied. 3. Press an alarm key (e.g. DISARM) of the second remote control (e.g. SH624): No extra zones are occupied. 4. Repeat t

Краткое содержание страницы № 17

5.4 PROGRAMMING TELEPHONE NUMBER The Marmitek SC2800 base station has a standard telephone dialler. In case of a alarm, up to 4 telephone numbers of up to 16 digits can be dialled. The phone numbers which are dialled get to listen to your pre-recorded message (5.5). Whoever picks up the phone needs to confirm the call by pressing a 0 on the telephone. The telephone dialler of the base station now knows that somebody is alerted and will stop dialling. You have to program 4 telephone numbers (your

Краткое содержание страницы № 18

5.5 RECORDING THE ALARM MESSAGE The alarm message of the telephone dialler can be recorded and re-recorded when required. The message can be up to approx. 12 seconds. It is recommended not to make the message any shorter as otherwise long silent gaps will cause confusion (the message is playing continuously) with the person picking up the phone. The message will be recorded via the microphone of the base station. Every time you press a key you hear a short confirmation beep. The distance between

Краткое содержание страницы № 19

5.6 DELAY TIMES ARMING When arming the security system by means of the remote controls KR21 or SH624 in the ARM AWAY mode, the system will arm with a instantaneously (factory default). In case you want to arm the system delayed, you can program the base station for a delay. (N.B.: Arming the system by means of the ARM AWAY button on the base station, always will result in a delayed arming of the system). ALARM SENSORS When the security system is armed, sensors can activate the system either inst

Краткое содержание страницы № 20

5.7 JAMMING DETECTOR ON/OFF The Marmitek SC2800 base station is equipped with a system to detect strong external interfering signal that may affect the proper operation of the security system. Signals of e.g. wireless headsets may influence the range of sensors drastically. In case you want your system to detect these signals, you have to switch on the anti jamming function. When your security system is armed and an interfering signal is detected for a period of over 20 seconds, the base station


Скачавание инструкции
# Руководство по эксплуатации Категория Скачать
1 Marmitek 120 Руководство по эксплуатации Домашняя система защиты 0
2 Marmitek DoorGuard400TM Руководство по эксплуатации Домашняя система защиты 0
3 Marmitek 20075/20070403 Руководство по эксплуатации Домашняя система защиты 2
4 Marmitek 1082002 Руководство по эксплуатации Домашняя система защиты 1
5 Marmitek DOORGUARD300TM Руководство по эксплуатации Домашняя система защиты 0
6 Marmitek CM15PRO Руководство по эксплуатации Домашняя система защиты 13
7 Marmitek MS9970 Руководство по эксплуатации Домашняя система защиты 4
8 Marmitek HomeGuard Telephone Alarm Руководство по эксплуатации Домашняя система защиты 5
9 Marmitek M228 Руководство по эксплуатации Домашняя система защиты 2
10 Marmitek DoorGuard 400 Руководство по эксплуатации Домашняя система защиты 4
11 Marmitek MS9770 Руководство по эксплуатации Домашняя система защиты 0
12 Marmitek DoorGuard 300 Руководство по эксплуатации Домашняя система защиты 0
13 Marmitek PROGUARD 800 GB843 Руководство по эксплуатации Домашняя система защиты 12
14 Marmitek VIDEO DOORPHONE Руководство по эксплуатации Домашняя система защиты 0
15 Marmitek TOTALGUARD Руководство по эксплуатации Домашняя система защиты 8
16 3Com 1000BASE-T-GBIC Руководство по эксплуатации Домашняя система защиты 0
17 Sony BRCSDP12 Руководство по эксплуатации Домашняя система защиты 3
18 3Com TECHD-0000000122 Руководство по эксплуатации Домашняя система защиты 1
19 Sony SSC-M354 Руководство по эксплуатации Домашняя система защиты 3
20 Sony DIGITAL 8 DCR-TRV130E Руководство по эксплуатации Домашняя система защиты 9