Краткое содержание страницы № 1
n
I \-
12.7 mm (1/2") MODEL 6900D
12.7 mm (1/2") MODEL 6900DW
With Fast Charger
INSTRUCTION MANUAL
SPECIFICATIONS
Model 6900D
Capacities Impacts per minute
Bolt size
Square drive At high speed At low speed
Standard bolt High tensile bolt
M8 - M14 15/16" - 9/16") ME - M10 15/16" ~ 318") 12 7 mm 11/2"l 2,000 1,500
No load speed IRPMI Tightening torque
Overall Net
length weight
High LOW At high speed At low speed
1,500 1 ,,300 I 1,000 kg.cm 172 ft.lbs1 I 400 kg.cm 129 tt.lbsl 226 m
Краткое содержание страницы № 2
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. 2. CONSIDER WORK AREA ENVIRONMENT. Don't use power tools in damp or wet locations. Keep work area well lit. Don't expose power tools to rain. Don't use tool in presence
Краткое содержание страницы № 3
I 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in. 16. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked. 17. STAY ALERT. Watch what you are doing, use common sense. Don't operate tool when you ar
Краткое содержание страницы № 4
IMPORTANT SAFETY INSTRUCTIONS I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 3. CAUTION - To reduce risk of injury, charge only MAKITA Battery 9000. Other types of batteries may burst causing personal injury and damage. 4. Do not expose charger to rain or snow. 5. Use of an at
Краткое содержание страницы № 5
ADDITIONAL SAFETY RULES I FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power receptacle. 3. Do not allow anythiqg to cover or clog the charger vents. 4. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as
Краткое содержание страницы № 6
Installing or removing battery cartridge Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, pull out Set plate the set plate on the tool and grasp both I sides of the cartridge while withdrawing it / Battery cartridge I k from the barrel. To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Snap the set plate back into place. Be sure to close th
Краткое содержание страницы № 7
e When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it completely a couple of times. e If you wish to charge two battery cartridges, allow 15 minutes between chargings on the fast charger. Selecting correct socket Use a correct size socket for bolts and nuts. A wrong size socket w
Краткое содержание страницы № 8
Reversing switch and speed change switch action Slide the reversing switch to the right for clockwise rotation or to the left for counterclockwise. Slide the speed change switch to the right for high speed (high tightening torque) or to the left for low speed (low tightening torque). Select the speed suitable for your bolt by referring to the figures listed under "Operation". CAUTION : Always check the direction of rotation before operation. .Use the reversing switch only when the t
Краткое содержание страницы № 9
Operation The proper tightening torque may differ depending upon the kind or size of the bolt. The relation between tightening torque and tightening time is shown in the figures below. Standard bo1 t kg cm Iff. Ibrl MI4 l9/16'1 at high rpssd Proper lightening lorqua lor M14 l9/16"1 Proper tightening torque lor M12 1112''I MI0 13/8"l SI low speed Proper ttghtenmg torque lor MI0 1318") Proper tightening torque lor M8 15116'1 I I I 1 0 1 2 3 4 5 seconds Tightening time High tens
Краткое содержание страницы № 10
Speed Type of bolt Tightening time Number of tightenings M10 13/8") 3 seconds 90 High High tensile bolt Low Standard bolt M8 (5/16") 1 second 450 CAUTION : If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery. 10 *..:k:: . i'i, 5i .'i'..'.>. , ... .. .;:;. . :.,"! .. . .j ,,I.::. '.' .!_.:. . "... . .::,,:::.y . . _. ... . ;: : ?.\:.: . . . .... . .. . ., . . . . . ...
Краткое содержание страницы № 11
.. : . .. ,.. ... . ..... i:: . .. . !,?>. . . .. , . . . .. . . , . . .... .. ... .. ... . .. .., .. . . .... . . :. :. +:;.,I. ,.,.. . ii ;; . MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment by Makita Authorized or Factory Service Centers, always using should be performed Makita rep
Краткое содержание страницы № 12
ACCESSOR I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended mannuer. Socket (With pin and 0 ring) 0 ring for socket 213370-0 21 3405.1 0 Extension bar 0 Universal joint Part No. 133211-3 Part No. 133210-5 [With pin (Part No. 256036-91 and I With pin
Краткое содержание страницы № 13
... : , . . . . ,. . .. . .. . :.i:.. h:; . .. .. !.? : ... .. . .. .. ._._ ' ... f.. ... .. . ... ..:. .. ; .. .. 'I .;:.$,: , 1'. 8, 1 . . ... ,,., , , Phillips bit Bit adapter (Use with bit adapter) Part No. 134530-0 [With pin (Part No. 256095-3) and 0 ring (Part No. 213370-O)] For driving machine screws. 784208- 1 45 (1-3/4") 12 V Fast charger Model DC9012 Fast charger Model DC9100 Plastic carrying case Part No. 824310-9 Battery cartridge 9000 Part No. 632007
Краткое содержание страницы № 14
Juna-Ol-'BB US 12.7 mm (1/2") @-- CORDLESS IMPACT WRENCH Model 6900D Note: The switch and other part configurations may differ from country to country. 14 .. . . .. ..
Краткое содержание страницы № 15
June-03-'88 US MODEL 69000 $$D DESCRIPTION ';"OM $&, DESCRIPTION MACHINE - 20 I Hm"r 1 I Pan Head Screw M3x14 lWilh Washer1 21 1 Steel 0.11 5 6 2 1 Switch 22 1 Smal 0.11 5 8 3 1 Pan Head Screw M3.14 lWith Washer1 4 1 TrlOga, 23 1 Awl 5 1 Compression Spring 2 24 I Flat Wesher 18 1 6 1 Hausmp S.1 lWith Item 201 25 Rubbr Washer 24 26 1 7 1 L..l SP" SI..". I0 27 1 01 S..I 10 0 I LWa, 28 1 Housing Sot lWnh llsm 61 9 1 PI.". 0.anng 4 29 8 Pan Head Screw Mar22 (With Warher) 10 1 G
Краткое содержание страницы № 16
MAKmA LIMITED ONE YEAR WARRANTY I Warranty Policy Fvery Makita tool is thorou ly inspected and tested before leaving the factory. It is warranted to be free of defects from workanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or mater
