Краткое содержание страницы № 1
02494
LT1538
Owner's Manual
Краткое содержание страницы № 2
SAFETY RULES SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. DO NOT: I. GENERAL OPERATION Do not turn on slopes unless necessary, and then, Read, understand, and follow all instructions in the turn slowly and gradually downhill, if possible. manual and on the machine before starting. Do not
Краткое содержание страницы № 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area. WARNING: In order to prevent ac- Never carry passengers or children even with the blades ci den tal starting when setting up, off. trans port ing, ad just ing or making re- Do not mow in reverse unless absolutely necessary. Al ways pairs, alwa ys dis con nect spark plug look down and behind before and while backing. wire
Краткое содержание страницы № 4
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu factured to giv e GASOLINE CAPACITY 1.25 GALLONS you the best possible dependability and performance. AND TYPE: UNLEADED REGULAR Should you experience any problem you cannot easily rem- OIL TYPE (API-SF-SJ): SAE 30 (above 32°F) edy, please contact your nearest authorized service center/ SAE 5
Краткое содержание страницы № 5
UNASSEMBLED PARTS Steering Wheel Seat (1) Washer 17/32 x 1-3/16 x 12 Gauge (1) Lock Washer 1/2 Steering Wheel Insert Steering Boot Steering (1) Bolt Extension Shaft Steering Wheel Adapter (1) Oil Drain Tube For Future Use Keys (2) Keys Slope Sheet (1) Locknut 1/2-20 (1) Large Flat Washer (1) Locknut 1/4-28 (1) Hex Bolt 1/4-28 x 1-1/4 5
Краткое содержание страницы № 6
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY INSERT A socket wrench set will make assembly easier. Stan dard wrench sizes are listed. 1/2 HEX NUT (2) 7/16" wrenches Pliers LARGE FLAT (1) 3/4" wrench
Краткое содержание страницы № 7
ASSEMBLY Be sure tractor is in a well-ventilated area. Be sure the area SEAT SHOUL- in front of tractor is clear of other people and objects. DER BOLT Be sure all the above assembly steps have been com- pleted. Check engine oil level and fi ll fuel tank with gasoline. SEAT PAN Sit on seat in operating position, depress clutch/brake pedal and set the parking brake. Place gear shift lever in neutral (N) position. Press lift lever plunger and raise attachment lift lever
Краткое содержание страницы № 8
ASSEMBLY ✓CHE CKLIST CHECK TIRE PRESSURE BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- The tires on your tractor were overinfl ated at the factory TOR, WE WISH TO ASSURE THAT YOU RE CEIVE THE for shipping purposes. Correct tire pressure is important BEST PER FORM ANCE AND SATISFACTION FROM THIS for best cutting performance. QUAL ITY PRODUCT. Reduce tire pressure to PSI shown in “PRODUCT SPEC I FI CATIONS” section of this manual. PLEASE REVIEW THE FOLLOWING CHECKLIST: ✓ All assembly
Краткое содержание страницы № 9
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. FAST IGNITION REVERSE NEUTRAL HIGH LOW SLOW CHOKE P LIGHTS ON ENGINE START PARKING BRAKE ENGINE OFF ENGINE ON PARKING BRAKE PARKING BRAKE LOCKED UNLOCKED OIL PRESSURE BATTERY REVERSE OVER TEMP FUEL FORWARD MOWER HEIGHT MOWER LIFT LIGHT 15 15 15 ATTACHMENT ATTACHMENT SLOPE HAZARDS CLUTCH ENGAGED CLUTCH DISENGAGED DANGER, KEEP HANDS KEEP AREA CLEAR AND FEET AWAY
Краткое содержание страницы № 10
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. LIGHT SWITCH IGNITION ATTACHMENT POSITION SWITCH CLUTCH LEVER LIFT LEVER PLUNGER THROTTLE/CHOKE ATTACHMENT CONTROL LIFT LEVER MOWER DECK HEIGHT ADJUSTMENT POSITIONS CLUTCH/ BRAKE PEDAL GEARSHIFT LEVER PARKING BRAKE FIG. 5 Our tra
Краткое содержание страницы № 11
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while op- erating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spectacles or stan dard safety glasses. IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY HOW TO USE YOUR TRACTOR POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DIS CHARGED, (DEAD). TO SET PARK
Краткое содержание страницы № 12
OPERATION NOTE: To protect hood from damage when transporting TO OPERATE MOWER (See Fig.7) your tractor on a truck or a trailer, be sure hood is closed Your tractor is equipped with an operator presence sens ing and secured to tractor. Use an appropriate means of tying switch. Any attempt by the operator to leave the seat with hood to tractor (rope, cord, etc.). the engine running and the attachment clutch engaged will shut off the engine. TOWING CARTS AND OTHER Select desired h
Краткое содержание страницы № 13
OPERATION TO START ENGINE (See Fig. 5) When starting the engine for the fi rst time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. Sit on seat in operating position, depress clutch/brake pedal and set parking brake. Place gear shift lever in neutral (N) position. Move attachment clutch to “DISENGAGED” position. FIG. 8 Move throttle control to choke position. If grass is extremely tall, it should be mowed
Краткое содержание страницы № 14
MAINTENANCE MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems T R Check for Loose Fasteners 5 A Sharpen/Replace Mower Blades 3 C Lubrication Chart T Check Battery Level 4 0 Clean Battery and Terminals R Check Transaxle Cooling Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1,2 Change Engine Oil (without oil filter) 1,2 E Clean Air Filter N 2 G Clean Air
Краткое содержание страницы № 15
MAINTENANCE TRACTOR MANDREL ASSEMBLY TRAILING Always observe safety rules when performing any main- EDGE UP te nance. CEN TER HOLE BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Ad just ments section of this manual). STAR LOCK WASHER TIRES BLADE Maintain proper air pressure in all tires (See “PROD UCT SPECIFICATIONS” section of this manual). FLAT WASHER
Краткое содержание страницы № 16
MAINTENANCE BATTERY TO CHANGE ENGINE OIL (See Figs. 12 and 13) Y our tractor has a battery charging system which is suf fi cient Determine temperature range expected before oil change. for normal use. However, periodic charging of the battery All oil must meet API service classifi cation SF-SJ. with an automotive charger will extend its life. Be sure tractor is on level surface. Keep battery and terminals clean. Oil will drain more freely when warm. Keep battery bolts ti
Краткое содержание страницы № 17
MAINTENANCE CLEAN AIR SCREEN COVER KNOB AIR CLEANER Air screen must be kept free of dirt and chaff to prevent WING NUT COVER engine dam age from overheating. Clean with a wire brush or compressed air to re move dirt and stubborn dried gum FOAM fi bers. PRE-CLEANER RUBBER CLEAN AIR INTAKE/COOLING AREAS GROMMET To insure proper cooling, make sure the grass screen, cooling fi ns, and other external surfaces of the engine are kept clean at all times. Every 100 hours of operation (more often und
Краткое содержание страницы № 18
MAINTENANCE MUFFLER CLAMP Inspect and replace corroded muffl er and spark arrester CLAMP (if equipped) as it could create a fi re hazard and/or dam- age. SPARK PLUGS FUEL Replace spark plugs at the beginning of each mowing FILTER season or after every 100 hours of operation, whichever occurs fi rst. Spark plug type and gap setting are shown in “PROD UCT SPECIFICATIONS” section of this manual. FIG. 15 IN-LINE FUEL FILTER (See Fig. 15) CLEANING The fuel fi lter should be replaced once each s
Краткое содержание страницы № 19
SERVICE AND ADJUSTMENTS WARNING: TO AVIOD SE RI OUS IN JU RY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in “DISENGAGED” position. Turn ignition key to “STOP” and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. IMP
Краткое содержание страницы № 20
SERVICE AND ADJUSTMENTS When distance “D” is 1/8" to 1/2" lower at front than TO LEVEL MOWER HOUSING rear, tighten nuts “F” against trunnion on both front Adjust the mower while tractor is parked on level ground links. or driveway. Make sure tires are properly infl ated (See To raise front of mower, loosen nut “F” from trunnion on “PROD UCT SPECIFICATIONS” section of this manual). If both front links. Tighten nut “E” on both front links an tires are over or underinfl ated, you
