Краткое содержание страницы № 1
Bicycle RePAiR STAND
WiTH TOOl TRAy
Model 98579
SeT uP AND OPeRATiNg iNSTRucTiONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVe THiS MANuAl.
© ®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this ma
Краткое содержание страницы № 2
cAuTiON, without the SAVe THiS MANuAl safety alert symbol, is Keep this manual for the safety warnings used to address practices not and precautions, assembly, operating, related to personal injury. inspection, maintenance and cleaning procedures. Write the product’s serial number Assembly Precautions in the back of the manual near the assembly 1. Assemble only according to these diagram (or month and year of purchase if instructions. Improper assembly can product has no number).
Краткое содержание страницы № 3
7. Only use the Stand on a flat, dry, level surface capable of supporting the weight of the Stand and its load. 8. Do not exceed the Stand’s maximum load capacity of 66 pounds. Beware of dynamic loading! Suddenly dropping load may create for a brief instance an excess load which may result in personal injury and/or property damage. 9. Do not move the Stand with a load attached. The Stand could tip over, resulting in personal injury and/or property damage. 10. Do not allow anyone to s
Краткое содержание страницы № 4
BOl T (8) FiguRe B SPeciFicATiONS Weight Capacity 66 lb. Bicycle Capacity 1 Dimensions 24-3/4” L x 37-1/2” W x 41-1/2” H leg (5) HeAD BAR (6) NuT (9) 2. Attach the Head Bar (6) to end of the Leg uNPAckiNg (5), using two Bolts (8) and two Nuts (9). Repeat this procedure for the remaining When unpacking, make sure that the Head Bar and Leg. (See Figure B.) item is intact and undamaged. If any parts are missing or broken, please call Harbor FiguRe c Freight Tools at 1-800-444-3353 as soon as
Краткое содержание страницы № 5
FiguRe H cONNecTOR kNOB (23) BOl T (16) PROTecTOR HeAD (22) BAR (6) BOl T (8) NuT (9) FiguRe e 5. Attach the Protector (22) to the crossbeam of the Head Bar (6), using BRAke cAP (24) one Bolt (8) and one Nut (9). Repeat this procedure for the remaining Protector 8. Secure the Mounting Curve (10) in and Head Bar. (See Figure e.) position, using one Knob Bolt (16) and one Brake Cap (24). (See Figure H.) MOuNTiNg FiguRe i cuRVe (10) kNOB FiguRe F BOl T (16) MOuNTiNg ScReWS (17) cuRVe (
Краткое содержание страницы № 6
HOOk FiguRe l clAMP (19) MOuNTiNg cuRVe (10) SPRiNg FiguRe j (14) SPRiNg (14) SPAceR SOckeT HeAD (13) ScReW (12) 10. Attach the Spring (14) to the Mounting Curve (10), using one Socket Head Screw (12) and one Spacer (13). 12. Insert the end of the Spring (14) into the (See Figure j.) hole in the Hook Clamp (19). (See Figure l.) HOOk clAMP (19) FiguRe k HeAD BAR HeAD BAR (6) (6) FiguRe M clAMP kNOB (7) MOuNTiNg cuRVe (10) TRAy (25) 13. Attach the Tray (25) to the two Head 11. Atta
Краткое содержание страницы № 7
OPeRATiNg iNSTRucTiONS FiguRe O Read the eNTiRe iMPORTANT SAFeTy iNFORMATiON section at the beginning of this manual including all text under subheadings therein before set up or use of this product. kNOB 1. Locate the Stand on a clean, dry, flat, BOl T (16) and level surface capable of supporting the weight of the Stand, bicycle, bicycle 4. To swivel the bicycle upward or parts, tools, etc. downward loosen the Knob Bolt (16). TOP ADjuSTABle Move the bicycle to the desired positi
Краткое содержание страницы № 8
MAiNTeNANce AND PleASe ReAD THe SeRViciNg FOllOWiNg cAReFully THE MANUFACTURER AND/OR DISTRIBUTOR Procedures not specifically HAS PROvIDED THE PARTS LIST AND ASSEMBLY explained in this manual must DIAgRAM IN THIS MANUAL AS A REFERENCE be performed only by a qualified TOOL ONLY. NEITHER THE MANUFACTURER OR technician. DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER TO PReVeNT THAT HE OR SHE IS qUALIFIED TO MAKE ANY SeRiOuS iNjuR y REPAIRS TO THE PRODUCT,
Краткое содержание страницы № 9
PARTS liST & ASSeMBly DiAgRAM Part Description Qty. Part Description Qty. Part Description Qty. 1 Foot Cover 1 10 Mounting Curve 1 19 Hook Clamp 1 2 Foot 2 11 Knob Nut (M8) 2 20 Knob Bolt (M8x70) 2 3 Tube Cap 9 12 Socket Head Screw 1 21 Top Saddle 1 4 Tube Cap 4 13 Spacer 1 22 Protector 2 5 Leg 2 14 Spring 1 23 Connector 1 6 Head Bar 2 15 Front Wheel Stabilizer 2 24 Brake Cap 1 7 Clamp Knob 1 16 Knob Bolt 2 25 Tray 1 8 Bolt (M8x70) 11 17 Screw 2 9 Nut (M8) 10 18 Adjustable Saddle 1 SKU 98579 For
