Краткое содержание страницы № 1
Vigor 3300 Series
Broadband VoIP/Security/Load Balance Router
User’s Guide
Version: 2.1
Date: 2006/08/02
Краткое содержание страницы № 2
Copyright Information Copyright Copyright 2006 All rights reserved. This publication contains information that is Declarations protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The scope of delivery and other details are subject to change without prior notice. Trademarks The following trademarks are used in this document: Microsoft is a regi
Краткое содержание страницы № 3
T Ta ab blle e o of f C Co on nt te en nt ts s 1 Preface ...............................................................................................................1 1.1 LED Indicators and Connection .............................................................................................. 2 1.1.1 LED Indicators and Connectors for Vigor3300V .............................................................. 2 1.1.2 LED Indicators and Connectors for Vigor3300........................
Краткое содержание страницы № 4
3.3.8 LAN Port Mirroring Setup................................................................................................ 68 3.3.9 LAN VLAN Setup............................................................................................................68 3.3.10 SNMP............................................................................................................................ 71 3.4 Firewall Setup ............................................................................
Краткое содержание страницы № 5
1 Preface Preface The Vigor3300 Series integrates a rich suite of functions, including NAT, firewall, VPN, load balance, bandwidth management, and VoIP capability. These products are very suitable for providing multi-integrated solutions to SME markets. An application scenario for the Vigor3300 Series is depicted in Figure 1-1, which illustrates interconnections among branch offices through the Internet via the Vigor3300 Series routers. By combining with an existing PABX, an Internet
Краткое содержание страницы № 6
T.38 fax relay. By enabling and configuring fax rate on a dial peer, the originating and the terminating V3300V can enter fax relay transfer mode. By using the T.38 function, customers can also save on fax expenses. Lastly, by enabling the load balance feature on multiple WAN ports, lease lines can be replaced to provide a cost-effective method for network infrastructure. 1.1 LED Indicators and Connection 1.1 LED Indicators and Connection The Vigor3300V has 4 WAN interfaces and Vigor33
Краткое содержание страницы № 7
LED Status Explanation LNK On The Ethernet link is established on corresponding port. Off No Ethernet link is established. LAN 100 On It means that a normal 100 Mbps connection is (1, 2, 3, 4) through its corresponding port. Off It means that a normal 10 Mbps connection is through its corresponding port. FDX On It means a full duplex connection on corresponding port. Off It means a half duplex connection on corresponding port. LNK On The Ethernet link is established. Blinking
Краткое содержание страницы № 8
1 1..1 1..2 2 L LE ED D IIn nd diic ca at to or rs s a an nd d C Co on nn ne ec ct to or rs s f fo or r V Viig go or r3 33 30 00 0 LED Status Explanation PWR On The router is powered on. Off The router is powered off. ACT On/Blinking The system is active. Off The system is hanged. WLAN No Reserved for future use. VPN On The VPN tunnel is launched. Off The VPN tunnel is closed. Attack On The Attack function is active. Off The Attack function is inactive. QoS On The QoS f
Краткое содержание страницы № 9
LED Status Explanation 100M On It means that a normal 100Mbps connection is through its corresponding port. Off It means that a normal 10Mbps connection is through its corresponding port. FDX On It means a full duplex connection on corresponding port. Off It means a half duplex connection on corresponding port. Interface Description Console Provided for technician use. LAN (P1 ~ P4) Connecter for local networked devices. WAN/DMZ (WAN1 ~ WAN3) Connecter for remote networke
Краткое содержание страницы № 10
1 1..1 1..3 3 L LE ED D IIn nd diic ca at to or rs s a an nd d C Co on nn ne ec ct to or rs s f fo or r V Viig go or r3 33 30 00 0B B+ + LED Status Explanation PWR On The router is powered on. Off The router is powered off. ACT On/Blinking The system is active. Off The system is hanged. Attack On The Attack function is active. Off The Attack function is inactive. QoS On The QoS function is active. Off The QoS function is inactive. LNK On The Ethernet link is established
Краткое содержание страницы № 11
LED Status Explanation FDX On It means a full duplex connection on corresponding port. Off It means a half duplex connection on corresponding port. Interface Description Console Provided for technician use. LAN (P1 ~ P4) Connecter for local networked devices. WAN1 ~ WAN3 Connecter for remote networked devices. C Co on nn ne ec ct te er r S Sp pe ec ciif fiic ca at tiio on n Auxiliary Type, Connected to Remarks Cables Color Power Cord Black AC Outlet 90-264VAC Serial (Con
Краткое содержание страницы № 12
1 1..2 2 H Ha ar rd dw wa ar re e I In ns st ta alllla at tiio on n Before starting to configure the router, you have to connect your devices correctly. 1. Connect the power cord to the power port of Vigor3300 router on the rear panel, and the other side into a wall outlet. 2. Power on the device by pressing the power switch on the rear panel. The PWR LED should be ON. 3. The system starts to initiate. After completing the system test, the ACT LED will light up and start blinking.
Краткое содержание страницы № 13
1 1..2 2..1 1 D De et ta aiille ed d E Ex xp plla an na at tiio on n f fo or r t th he e C Co on nn ne ec ct to or r Here provides you detailed explanation for some specific connectors that you have to be familiar. T Th he e R RS S2 23 32 2 C Co on nn ne ec ct to or r The RJ45 connection jet is used for CLI commands for system configuration and control functions in the Vigor3300 Series. The jet is used for initialization of the Vigor3300 Series during preliminary installation. T
Краткое содержание страницы № 14
After the bracket installation, the Vigor3300 Series chassis can be installed in a rack by using four screws for each side of the rack. Desktop Type Installation Desktop Type Installation Rubber pads are included with the Vigor3300 Series. These rubber pads improve the air circulation and decrease unnecessary rubbing on the desktop. 10 Vigor3300 Series User’s Guide
Краткое содержание страницы № 15
2 Configuring Basic Settings Configuring Basic Settings For use the router properly, it is necessary for you to change the password of web configuration for security and adjust primary basic settings. This chapter explains how to setup a password for an administrator and how to adjust basic settings for accessing Internet successfully. 2.1 Changing Password 2.1 Changing Password To change the password for this device, you have to access into the web browser with default password f
Краткое содержание страницы № 16
3. Now, the Main Screen will pop up. 4. Go to System page and choose Change Password. 5. The following screen will appear. 6. Enter the login password (1234) on the field of Old Password. Type a new one in the field of New Password and retype it on the field of Confirm Password. Then click Apply to continue. 12 Vigor3300 Series User’s Guide
Краткое содержание страницы № 17
7. Now, the password has been changed. Next time, use the new password to access the Web Configurator for this router. 8. Next, you will see the login screen after clicking Apply. Please use new password to re-enter the system configuration. 2 2..2 2 Q Qu uiic ck k S Se et tu up p Quick Setup is designed for configuring your broadband router accessing Internet with simply steps. There are two phases of quick setup, one is WAN configuration and the other is LAN configuration. 2.2.1
Краткое содержание страницы № 18
MAC Address Router Default- Use the default Mac address stored originally in router. User Definition- Use a MAC address defined by the user. Downstream Rate Assign the downstream rate for this WAN interface. The default value is 102400 kbps (100 Megabit). This setting is very important for Vigor3300 Series incoming buffer adjustment. If you use a DSL subscriber service with a 2Mbps downstream, please set the downstream rate setting with 2Mbps. Upstream Rate Assign the transmiss
Краткое содержание страницы № 19
2 2..2 2..2 2 S St ta at tiic c M Mo od de e You can manually assign a static IP address to the WAN interface and complete the configuration by applying the settings and rebooting your router. Choosing Static as the IP mode, you will see the following page: All the settings here are set by privately. Your ISP will not provide these settings. IP Address Assign a private IP address to the WAN interface. Subnet Mask Assign a subnet mask value to the WAN interface. Default Gateway Assi
Краткое содержание страницы № 20
IP Address Assign an IP address for the LAN interface. Subnet Mask Assign the subnet mask for the LAN interface. Status Click Enable to use DHCP server; click Disable to close DHCP server; click Relay Agent to activate relay agent function. Start IP Assign the start IP address of the IP pool that DHCP server can use for clients in LAN. End IP Assign the end IP address of the IP pool that DHCP sever can use for clients in LAN. Primary DNS Type the IP address for primary DNS. When
