Краткое содержание страницы № 1
Chapter
Data Communications
This chapter tells you everything you need to know to transfer
programs between two CASIO Power Graphic calculators
connected using the cable that is equipped as a standard
10
accessory.
You can also use the cable to connect the calculator to a CASIO
Label Printer to print screen data.
To transfer data between a calculator and a personal computer,
you need to purchase the separately available CASIO FA-123
Connection Kit.
10-1 Connecting Two Units
10-2 Connecting the U
Краткое содержание страницы № 2
10-1-1 Connecting Two Units 10-1 Connecting Two Units The following procedure describes how to connect two units with the connecting cable that comes equipped as a standard accessory. uuuuu To connect two units 1. Check to make sure that the power of both units is off. 2. Remove the covers from the connectors of the two units. 3. Connect the two units using the cable. Cable #Be sure you keep the connector covers in a #Keep the connectors covered when you are not safe place so you can replace the
Краткое содержание страницы № 3
10-2-1 Connecting the Unit with a CASIO Label Printer 10-2 Connecting the Unit with a CASIO Label Printer After you connect the unit to a CASIO Label Printer with cable, you can use the Label Printer to print screen shot data from the unit (see 10-6 Sending a Screen Shot). See the user’s guide that comes with your Label Printer for details on how to perform this operation. • The operation described above can be performed using the following Label Printer models: KL-2000, KL-2700, KL-8200, KL-870
Краткое содержание страницы № 4
10-3-1 Connecting the Unit to a Personal Computer 10-3 Connecting the Unit to a Personal Computer To transfer data and screen shots between the unit and a personal computer, you must connect them through a separately available CASIO FA-123 Connection Kit. For details on operation, the types of computer that can be connected, and hardware limitations, see the user’s manual that comes with the FA-123. Some types of data may not be able to be exchanged with a personal computer. u To connect the uni
Краткое содержание страницы № 5
10-4-1 Performing a Data Communication Operation 10-4 Performing a Data Communication Operation From the Main Menu, enter the LINK Mode. The following data communication main menu appears on the display. •{TRNS}/{Recv} ... menu of {send settings}/{receive settings} Communications parameters are fixed at the following settings. •Speed (BPS): 38.4 kbps (sending a data) 9,600bps (sending a screen shot) •Parity (PARITY): NONE kkkkk Performing a Data Transfer Operation Connect the two units and then
Краткое содержание страницы № 6
10-4-2 Performing a Data Communication Operation Sending unit To set up the calculator to send data, press 1(TRNS) while the data communication main menu is displayed. Press the number key that corresponds to the type of data you want to send. • {Select} ... {selects data items and sends them} • {Currnt} ... {selects data items from among previously selected data items and sends them} • {Backup} ... {sends all memory contents, including mode settings} • {H-Copy} ... {selects H-Copy screen shot
Краткое содержание страницы № 7
10-4-3 Performing a Data Communication Operation uTo execute a send operation After selecting the data items to send, press 6(Trns). A message appears to confirm that you want to execute the send operation. •w(Yes) ... sends data •i(No) ... returns to data selection screen Press w(Yes) to send the data. •You can interrupt a data operation at any time by pressing A. The following shows what the displays of the sending and receiving units look like after the data communication operation is complet
Краткое содержание страницы № 8
10-4-4 Performing a Data Communication Operation u To send backup data This operation allows you to send all memory contents, including mode settings. While the transmit data type selection menu is on the screen, press d(Backup), to display the screen shown below. Press w(Yes) to start the send operation. The following shows what the displays of the sending and receiving units look like after the data communication operation is complete. Sending Unit Receiving Unit Press i to return to the data
Краткое содержание страницы № 9
10-5-1 Data Communications Precautions 10-5 Data Communications Precautions The following are the types of data items that can be sent. Overwrite Password Data Item Contents 1 2 Check* Check* Program names Program contents Yes Yes (All programs are listed.) Mat n Matrix memory (A to Z) contents Yes List n List memory (1 to 20) contents Yes List File n List file memory (1 to 20) contents Yes Graph expressions, graph write/ Y=Data non-write status, V-Window contents, No zoom factors Graph Memory n
Краткое содержание страницы № 10
10-5-2 Data Communications Precautions •1(YES) ... {replaces the receiving unit’s existing data with the new data} •6(NO) ... {skips to next data item} 2 * With password check: If a file is password protected, a message appears asking for input of the password. Name of password protected file Password input field 2 After inputting the password, press w. Note the following precautions whenever you perform data communications. •An error occurs whenever you try to send data to a receiving unit th
Краткое содержание страницы № 11
10-6-1 Sending a Screen Shot 10-6 Sending a Screen Shot Use the following procedures to send a hardcopy of the screen directly to a connected personal computer (or CASIO Label Printer) or to save a screen shot in memory to send later. Screen shots can also be sent to a CASIO Label Printer. Use the LINK Mode set up (u3(SET UP)) to specify whether you want to send the screen shot now or save it in memory. u H-Copy •{Dirct}/{Mem} ............. {direct send}/{save} uuuuu To send a screen shot direct
Краткое содержание страницы № 12
10-6-2 Sending a Screen Shot uuuuu To send a saved screen shot to a computer or CASIO Label Printer 1. Connect the unit to the computer (or CASIO Label Printer). On the computer (or CASIO Label Printer), perform the procedures required to set it up to receive data. 2. In the LINK Mode, press 1(TRNS)e(H-Copy) to display of list of screen shots in memory. 3. Use the f and c cursor keys to highlight the name of the screen shot you want to send, and then press 6(Trns). 19990401
Краткое содержание страницы № 13
10-7-1 Add-ins 10-7 Add-ins Add-in capabilities let you install separately available applications and other software to tailor the calculator to suit your particular needs. Add-ins are installed from a computer using the data communication described on page 10-4-1. The following are the types of software that can be installed as add-ins. uuuuu Add-in Application After you install an application, its icon appears in the Main Menu, and you can run it just as you would a built-in application. uuuuu
Краткое содержание страницы № 14
10-8-1 MEMORY Mode 10-8 MEMORY Mode This calculator has two separate memory areas: a “current area” and a “storage area.” The current area is a work area where you can perform input data, perform calculations and run programs. Data in the current area is relatively safe, but it can be deleted when batteries go dead and when you perform a full reset. The storage area uses “flash memory,” so data is safe even when power is interrupted. Normally, you would use the storage area for data you need to
Краткое содержание страницы № 15
10-8-2 MEMORY Mode u To store a program file into the storage area 1. On the initial MEMORY Mode screen press 1(PROG). 1 • This displays a list of program files that are in the current area.* 2. Select the program file you want to store. •Use the cursor f and c keys to highlight the name of the program file you want to store, and then press 1(SEL). 3. Press 5(SAVE). The message “Complete!” appears when the store operation is finished. Press i to return to the screen displayed in step 1. A “Memor
Краткое содержание страницы № 16
10-8-3 MEMORY Mode u To load a program file from the storage area 1. On the initial MEMORY Mode screen press 1(PROG). 2. Press 6(STRG). 1 • This displays a list of program files that are in the storage area. * 3. Select the program file you want to load. •Use the cursor f and c keys to highlight the name of the program file you want to load, and then press 1(SEL). 4. Press 5(LOAD). The message “Complete!” appears when the load operation is finished. Press i to return to the screen displayed in s
Краткое содержание страницы № 17
10-8-4 MEMORY Mode k Deleting Program Files Use the following procedures to delete individual files or all files in the current area or storage areas. u To delete a current area program file 1. On the initial MEMORY Mode screen press 1(PROG). • This displays a list of program files that are in the current area. 2. Use the cursor f and c keys to highlight the name of the program file you want to delete, and then press 2(DEL). •Press w(Yes) to delete the program file. •Press i(No) to cancel the de
Краткое содержание страницы № 18
10-8-5 MEMORY Mode u To delete all the program files in the storage area 1. On the initial MEMORY Mode screen press 1(PROG). 2. Press 6(STRG). • This displays a list of program files that are in the storage area. 3. Press 3(DEL•A). •Press w(Yes) to delete all the program files in the storage area. •Press i(No) to cancel the delete operation. k Searching for a Program File Use the following procedures to search for a specific program file in the current area or in the storage area. 1 u To search
Краткое содержание страницы № 19
10-8-6 MEMORY Mode u To search for a program file in the storage area ○○ ○○○ Example To search for all program files in the storage area whose names begin with the letter “S” 1. On the initial MEMORY Mode screen press 1(PROG). 2. Press 6(STRG). • This displays a list of program files that are in the storage area. 3. Press 4(SRC). •Input the letter “S” for the keyword. • The first program file name that begins with the letter “S” appears highlighted on display. Press c or 1(SRC) to highlight the
Краткое содержание страницы № 20
10-8-7 MEMORY Mode k Backing Up Current Area Data You can back up all the data in the current area and store it in the storage area. Later you can restore the backed up data to the current area when necessary. u To back up current area data 1. On the initial MEMORY Mode screen press 2(BACK). •Screen A appears if there is already backup data in the storage area. Screen B appears if there is no backup data in the storage area. Screen A Screen B 2. Press 1(SAVE) to backup the data. The message “Com
