Краткое содержание страницы № 1
INSTRUCTION MANUAL
CCD CAMERA
CG-301 Series
Краткое содержание страницы № 2
WARNING – TO PREVENT RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS CAMERA TO RAIN OR MOISTURE. PRECAUTION : DO NOT REMOVE ANY COVER WHILE THE CAMERA IS OPERATING. PAL : USE ONLY RECOMMENDED POWER SUPPLY, 24 VAC (20.4 to 27.6 VAC) 50 Hz or 12VDC(10.2 to13.8VDC). NTSC : USE ONLY RECOMMENDED POWER SUPPLY, 24 VAC (20.4 to 27.6 VAC) 60 Hz or 12VDC(10.2 to13.8VDC). CAUTION : LENS MOUNT OF THE CAMERA IS “CS” MOUNT. CAMERA LENS MOUNT IS SHALLOW, SOME CAMERA LENSES MAY BOTTOM
Краткое содержание страницы № 3
CONTENTS Section Page IMPORTANT SAFEGUARDS 3 INTRODUCTION 5 CAUTIONS FOR OPERATION 5 EXTERNAL CONTROLS AND CONNECTORS 6 LENS 7 ELECTRONIC CONNECTIONS 7 MECHANICAL CONNECTION 7 BACK FOCAL ADJUSTMENT 8 POWER CONNECTION 9 AC POWER CONNECTION 9 DC POWER CONNECTION 9 SETUP MENU 10 SETTING METHOD 12 SETTING OPERATION
Краткое содержание страницы № 4
IMPORTANT SAFEGUARDS 1. Read Instructions–All the safety and operating instructions should be read before the camera is operated. 2. Retain Instructions–The safety and operating instructions should be retained for future reference. 3. Heed Warnings–All warnings on the camera and in the operating instructions should be adhered to. 4. Follow Instructions–All operating and use instructions should be followed. 5. Cleaning–Unplug the power unit from the wall outlet before cleaning. D
Краткое содержание страницы № 5
14. Overloading–Do not overload wall outlet and extension cord, as this can result in a risk of fire or electric shock. 15. Object and Liquid Entry–Never push objects of any kind into the camera through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the camera. 16. Servicing–Do not attempt to service the camera yourself as opening or removing covers may expose you to dangerous volt
Краткое содержание страницы № 6
INTRODUCTION Thank you for purchasing this product. This product is a multiple function and a high quality CCD camera developed considering a high-end security. The following functions are built-in: (1) Wide Dynamic Range function This function makes it possible to capture both high-luminance and low-luminance subjects. Dynamic Range of max.60 dB. (2) Day & Night function This is function to capture high quality color images during the day and clear B&W images at night. (3) Elec
Краткое содержание страницы № 7
EXTERNAL CONTROLS AND CONNECTORS 3 4 5 7 CAMERA MOUNT ADAPTER 6 8 9 10 1 2 3 BACK VIEW TOP/FRONT VIEW Fig.1 ① Lens Mount The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between the lens and camera. ② Back Focus Lock Screw Loosen to adjust the back focus to match the lens attached to the CS mount. Refer to the section on Back Focus Adjustment in this manual. ③ Camera Mounts Top or bottom mounting. Maximum thread length is
Краткое содержание страницы № 8
LENS This camera can accommodate DC voltage drive auto-iris lens. VIDEO signal controlled lens is not available. ELECTRONIC CONNECTIONS Table.1 shows wiring scheme for the 4pin Auto iris connector. Lens Connector Auto-iris Lens Table 1 Connector DC VOLTAGE DRIVE AUTO-IRIS LENS Pin No. 21 1 CONT. ( ) 43 2 CONT. (+) 3 DRIVE (+) (View from wiring side of plug) 4 DRIVE ( ) Fig. 2 MECHANICAL CONNECTION Before mounting any lens onto this camera, check that the rear lens dimen
Краткое содержание страницы № 9
BACK FOCAL LENGTH ADJUSTMENT The camera has been factory-adjusted for the proper back focal length using a standard CS Mount lens. However, when the lens is mounted, it may be necessary to readjust back focal length to match the lens being used. ALLEN WRENCH 10mm 50mm Approx.15 CAMERA Fig.4 CAUTION : If the back focus locking screw is tightened too strong, the thread section of “Lens Mount” may be damaged. To tighten the back focus locking screw, use a 1.5 mm ALLEN WRENCH. Ho
Краткое содержание страницы № 10
POWER CONNECTION This camera uses 24VAC or 12VDC power supply for the main supply. CAUTION : Take care not to short-circuit the power line wire, when connecting the power-supply cord to the camera. AC POWER CONNECTION A main supply of 24VAC (20.4 to 27.6 VAC) 50 / 60Hz is required. This main supply must also have a minimum rating of 270mA. Remove the sheath at the end of power cord in the length of 10mm. Twist and straighten the wires, then insert the wires to three holes of
Краткое содержание страницы № 11
SETUP MENU This product built in OSD function and can customize the camera setting. The menu list is shown in the following. MODE SELECT STANDARD DAY&NIGHT WIDE CASINO USER MODE RETURN END EXPOSURE SET. MAIN MENU AE MODE → WD MODE SELECT LENS ADJUSTMENT LEVEL → 0 EXPOSURE SET. FLICKERLESS → OFF FUNCTION SET. OK CANCEL AGC → ON CAMERA SETUP SENS UP → 4 LENS ADJUSTMENT DAY&NIGHT → AUTO MODE SAVE DETECT TIME → 5 sec BLEMI
Краткое содержание страницы № 12
SYNC SELECT PHASE SHIFT SYNC MODE AUTO PHASE → Phase Value = 28 RETURN END *Only when AUTO is selected CHROMA RY GAIN → -1 BY GAIN → -2 RY HUE → 1 BY HUE → 1 RETURN END E-ZOOM POSITION ZOOM → OFF POSITION RETURN END *Only when the zoom magnification is selected MASKING MASK SETTING MASK → OFF MASK EDIT MASK ERASE RETURN END *Only when ON is selected for MASK TIT
Краткое содержание страницы № 13
SETTING METHOD This camera has multiple functions, and can be adapted to a shooting place. There are 2 methods which are specified functions of the camera. (1) Setting method by using OSD(On-screen Display) function. Refer to the next section in details. (2) Setting method by using Direct-key function. This camera has Direct-key function. This function can control the following functions directly without displaying the menu. When ON is selected for each function, LED on the rear panel
Краткое содержание страницы № 14
SETTING OPERATION This camera has OSD function. To change settings on the menu, operate the following procedure. 1. Press and hold down the SW for 2 seconds or more. The SW on the rear panel is used. (Fig.1 ⑧) 2. MAIN MENU appears on the monitor as shown in Fig.7-5. 3. Move the cursor to an item you want to change by using the SW. The menu of the selected item is displayed. The SW can be used as direction key. (Fig.7-2) 4. Select a parameter you want to change and specify it. 5. To clo
Краткое содержание страницы № 15
Parameters of each mode is shown in Fig.7-7,7-8,7-9,7-10. STANDARD EXPOSURE SET. FUNCTION SET. → NORMAL AE MODE SYNC SELECT → AUTO → 0 → AUTO LEVEL WHITE BALANCE → OFF → FLICKERLESS CROMA → ON GAMMA → NORMAL AGC → 4 E-ZOOM → SENS UP → COLOR DAY&NIGHT MASKING → → 5sec DETECT TIME TITLE → → OFF FILTER LIMIT
Краткое содержание страницы № 16
(2) EXPOSURE SET. In this menu, the exposure system of the camera can be specified. There are 2 kinds of EXPOSURE SET. menu. A. AE MODE other than MANUAL B. MANUAL is selected for AE MODE EXPOSURE SET. EXPOSURE SET. → WD AE MODE AE MODE → MANUAL → 0 LEVEL LEVEL → 0 → OFF FLICKERLESS SHUTTER SPEED → 1/60 → ON AGC AGC → ON → 4 → OFF SENS UP SENS UP
Краткое содержание страницы № 17
DAY & NIGHT This item specifies the switch between Color and BW picture. AUTO : Auto mode enables the camera to switch between Color and BW picture in response to light condition. COLOR : Fixes to Color picture. BW : Fixes to BW picture. EXT. : This mode allows the camera to control by the external signal. Refer to the section on EXTERNAL CONTROL INPUT TERMINAL in this manual. Note) When OFF is selected for AGC, AUTO mode is not available. If you switch OFF for AGC while selectin
Краткое содержание страницы № 18
(3) FUNCTION SET. In this menu, functions other than exposure system can be specified. EXPOSURE SET. → SYNC SELECT → AUTO WHITE BALANCE → CROM A → NORMAL GAMMA → E-ZOOM → MASKING → TITLE RETURN END Fig.9-1 FUNCTION SET. menu (3-1)SYNC SELECT This camera supports the synchronization mode such as line lock and internal. PHASE SHIFT SYNC SELECT
Краткое содержание страницы № 19
(3-2) WHITE BALANCE WHITE BALANCE You can select one of 4 modes for white balance adjustment as follows. AUTO, HOLD, INDOOR (Approx. 2800K), OUTDOOR (Approx. 6000K) AUTO : The white balance is adjusted automatically to provide the optimum picture. HOLD : In this mode, the WB gain just before changing to this mode is kept. INDOOR, OUTDOOR : These modes are the fixed WB gain. Setting procedure for HOLD 1. Image a subject. Move the cursor to WHITE BALANCE and select AUTO. 2. Change WHIT
Краткое содержание страницы № 20
(3-5) E-ZOOM This camera built in electronic zoom, electronic panning and electronic tilting function. In this menu, these functions is specified. E-ZOOM POSITION ZOOM → 2.0 POSITION → RETURN END Fig.9-5 E-ZOOM menu ZOOM The zoom magnification is selected from the following. OFF, 1.5, 2.0, 2.5 Note) When 1.5, 2.0 or 2.5 is selected, WD and MASKING function is not available. POSI
