Руководство по эксплуатации Airlink101 SUPER G WIRELESS USB 2.0 ADAPTER AWLL4030

Краткое содержание страницы № 1

Ver. 1A
Step 3 Click Install Driver (Windows 2000/XP).

Quick Installation Guide
Super G Wireless USB 2.0 Adapter
Model # AWLL4030
Package Contents:
• Super G USB 2.0 Adapter
• USB 2.0 Extension Cable
• Installation CD
• Quick Installation Guide
Section 1
Step 4 Click Next at the welcome screen.
Installation
The following steps are for Windows 2000/XP. Please refer to the User’s
Manual on the provided CD for Windows 98SE/ME.
For Windows 2000/XP, you must update your USB driver to USB 2.0
For Wi

Краткое содержание страницы № 2

Step 5 Click Next to accept the License Agreement. Step 9 Click Next to accept the default Program Folder. Step 6 Verify Install Client Utilities and Driver is selected and click Next. Step 10 Read the notes carefully and click Next. Step 7 Click Yes to acknowledge the need for a reboot after the installation. Step 11 Verify Atheros Client Utlity and Supplicant is selected and click Next. Step 8 Click Next to accept the default Destination Folder. Step 12 Click OK to acknowledge the prompt. Cont

Краткое содержание страницы № 3

Step 13 Click Continue Anyway at the Windows Logo prompt for the Bootloader Section 3 Section 2 Download. (Click Yes for Windows 2000). Configure USB Adapter The following steps are for Windows 98SE/ME/2000/XP. If you already have signal strength and valid IP address, you do not need to perform the following steps. Step 1 Start the Atheros Client Utility by double-clicking on it from your desktop. Step 2 If there is no Signal Strength and/or the IP Address is all 0’s, select the Profile Managmen

Краткое содержание страницы № 4

Step 5 Return to the Current Status tab and verify that you have signal strength Step 3 Select the Default profile and click Modify. and valid IP address. Step 4 Enter the SSID (Network Name) that your wireless router/access point is If your wireless router/access point has encryption enabled, you’ll need to apply using in the SSID field and click OK. the same encryption settings to the Adapter as well. For information on how to configure encryption, please refer to the User’s Manual in the supp