Руководство по эксплуатации Epson Stylus C82

Краткое содержание страницы № 1

Installation Manual on
Continuous ink supply system (CISS)
For printer EPSON C82/C80/C70

Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the
best device for an inkjet printer, and it will definitely decrease your printing costs.
Before using this system, please read this manual carefully. The pictures in this manual
may be different with the real ones. It’s just for your reference.

Note: The pictures in this manual may be different with the real ones. Here ju

Краткое содержание страницы № 2

1. Check printer status to see whether it is normal or not, and check its mechanics for smooth and any damage. 2 Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is normal (2-2 2-3). , Pic. 2-1 Pic. 2-2, 2-3 3. If printer is alright, please print a picture to see the result. Ill. Installation Procedures 1. Remove ink from the air balance tub

Краткое содержание страницы № 3

Put this system on the right side of printer, tidy up ink flow tubes, pull out an air balance plug and replace it with an air filter with the bigger side downwards. 3. Move out cartridge holder Insert screwdriver like, screw screwdriver like until take cartridge cover off. 4. Install the system ink cartridges Take cartridges out. Install CISS cartridges according to printer indication and press cartridge down to the place. 5. Attach tubes Tear sponge seal off. Tidy up ink tube. Stic

Краткое содержание страницы № 4

Enter printer nozzle inspection option (3-10-1), print nozzle test sheet. If it is ok (3-10-2)), then can run printer. If line is missing (3-10-3), please clean the nozzle. If just one color is missing (maybe there is air in nozzle). If it is still a little line missing after several times cleaning, please turn printer off and let printer stay turned off for one hour or more. Please contact local distributor if still have problem. Pic.3-10-1

Краткое содержание страницы № 5

V. Removing used continuous ink supply system Replace air filters with air plugs (5-1-1).Move out cartridge holder and take the rack off. Take the cartridges out (5-1-2) and place the cartridges on the tissue with the ink flow nozzle downwards, and let the tissue at the same level with the system ink tank (5-1-3). Pic. 5-1-1 Pic. 5-1-2 Pic. 5-1-3 VI. Refill ink During printing, if you found

Краткое содержание страницы № 6

 Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.  Demonstrate the failed device to the service center managers (the warranty repair or replacement can be provided only upon the failed product availability). We cannot provide a warranty repair under several conditions:  If the warranty certificate is wrongly filled in.  If the device has mechanical damages: chippings, dents, fractures, scratches, etc.  If the identificati