Краткое содержание страницы № 1
Owner's Manual
MEDIAMASTER
9450 S
Краткое содержание страницы № 2
GB 2
Краткое содержание страницы № 3
MEDIAMASTER 9450 S Contents FOR YOUR SAFETY 4 The Radio button 15 Rear panel 4 Volume level 15 Front panel 5 List of TV channels 15 INSTALLATION OF THE MEDIAMASTER 5 List of Radio channels 16 Connecting the Mediamaster to the satellite Video recorder 16 dish 6 Subtitling and Teletext. The TEXT Button 16 Connecting the Mediamaster to a TV set 6 SETTING FROM THE MAIN MENU 16 Connecting to a TV and a video recorder 7 TV channels and radio channels 17 If your VCR does not have a SCART- TV Gu
Краткое содержание страницы № 4
FOR YOUR SAFETY Keep a clear space around the Mediamaster to allow for sufficient ventilation. Do not cover the Mediamaster or place it on a unit that emits heat. Use a soft cloth and a mild solution of dish washing liquid to clean the casing. Never allow liquids, spray or other materials to come into contact with the inside of the Mediamaster. Service should be carried out only at a Nokia authorized service center. Do not connect or modify cables when the Mediamaster is plugged in. Do
Краткое содержание страницы № 5
Front panel Power Up/Down To turn the receiver Select channel number, on/off (standby). up/down. Display Shows channel number, remote control signal and time in standby mode. At start up, it displays the model number. INSTALLATION OF THE MEDIAMASTER The box for your Mediamaster should contain the following items: Mediamaster 9450S includes SCART-Cable Owner s Remote Controller Manual and Batteries About the SCART sockets The rear panel of the Mediamaster is equipped with 2 SCART sockets. When yo
Краткое содержание страницы № 6
Connecting the Mediamaster to the satellite dish Installing the satellite dish Your satellite dish should be installed with a cable for you to connect to the Mediamaster. If you do not have this cable you will need to buy one from a dealer (tell the dealer you need a coaxial cable and F-connectors). Connect the cable from the satellite dish to the socket marked LNB IN on the back of the Mediamaster. If you need to fit the F-connectors onto the cable Prepare each end of the cable as shown in
Краткое содержание страницы № 7
Connecting to a TV and a Video recorder Refer to your video recorder manual for full instructions. Connect one SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. Connect another SCART cable between the VCR and the AUX SCART socket on the Mediamaster. Connect the RF cable from the RF output on the VCR to the TV aerial input on the TV. Connect the TV aerial to the RF input socket on the VCR. If Your VCR does not have a SCART connector Connect
Краткое содержание страницы № 8
Connecting to Hi Fi system Connect an RCA/Cinch stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your Hi Fi system. Preparing the remote control Remove the cover on the battery compartment at the bottom of the remote control handset. Insert the 2 x AAA (1,5 V) batteries, as shown in the diagram, taking care to observe the + and - markings indicated inside. Replace the cover. Before you continue Please read this information concern
Краткое содержание страницы № 9
REMOTE CONTROL This section describes how to operate the Mediamaster using the buttons on the remote control. Some of the functions can also be carried out using the buttons on the front panel. Switch the Mediamaster in and out of standby mode. EXIT TV Return to the viewing mode from a menu without storing settings (in menu mode). Switch between TV or Radio (in viewing mode). Turn the sound off/on (mute). Adjust the volume of digital programmes. The Mediamaster s maximum level is controlled
Краткое содержание страницы № 10
BASIC SETTINGS Once you have correctly connected the Mediamaster, you also have to perform some Basic Settings . During this procedure, helpful information is displayed at the bottom of the menus. Please note! The OK button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is important, often more than one value has to be entered in a menu. First, perform all necessary settings on the different lines. The
Краткое содержание страницы № 11
The Welcome Menu To install the Mediamaster properly you have to adjust a few settings. You will always be guided by the information at the bottom of the menus. When you have finished the final part of the setup procedure you can start watching TV channels and listening to radio channels. Now you should have the Welcome Menu on the TV screen. Press the OK button to proceed. Language Settings Select the menu language that you desire. This will define the language shown in the menus. This will als
Краткое содержание страницы № 12
Satellite name: From here you can select a name for the configuration. Switch Type: There are in principle two kinds of external DiSEqC switches on the market at present. One for connection of two LNBs. The other one for connection of up to 4 LNBs. If you have the other switch, defined as DiSEqC, Level 1 or 2 on the market, select DiSEqC 1, 2, (3 or 4) , for each LNB connected to respective inputs on this switch. LNB Type: Selection is possible for different kinds of LNBs. Select the frequency f
Краткое содержание страницы № 13
Manual Channel Search You can use manual channel search if you want to add new channels later. For example If you have a special antenna configuration which is not assigned in the Antenna alternative menu, you can add new channels using the manual channel search function. When you perform a Manual Search you first need to enter some parameters for the channel search to work. The information you need to enter in this menu is available in magazines covering satellite TV reception, on the Internet
Краткое содержание страницы № 14
TV Screen Format If you have a TV set with a 4:3 picture format, and the transmission is in 16:9, you can select 4:3 (Pan & Scan) or 4:3 (Letterbox) to change display format. 4:3 (Pan & Scan) will fill up the screen vertically, but cut off some information from the left and right sides of the picture. 4:3 (Letterbox) will give a complete picture, but leave black areas at the top and bottom. You can select the TV screen format in the System setting menu which is a subsidiary of the User preferenc
Краткое содержание страницы № 15
TV Guide By pressing the GUIDE button you obtain access to the TV Guide which gives the titles of the current programmes on the different channels. By pressing the LEFT or RIGHT button you also can also obtain information about the next programme. The minimized viewing window also helps you to select channels and information. Use the Up/Down buttons to move the cursor to different programme areas. You can obtain extended information for a programme by pressing the i button. The Radio Button The
Краткое содержание страницы № 16
List of Radio Channels While listening to radio Programmes you can see a programme list on the screen by pressing the OK button. You can change to another channel by pressing the UP/DOWN buttons and then pressing the OK button. To move faster (8 at the time) between the channels you can also use the DOUBLE ARROW buttons. Video Recorder With a Video Cassette Recorder (VCR) connected you can watch/record video tapes. If your VCR is connected with a SCART cable and you press the start button on the
Краткое содержание страницы № 17
TV Channels and Radio Channels TV/Radio Channels will show a list with the names of the different channels. To move faster within the list, use the DOUBLE ARROW buttons. Press OK to enter a marked channel. TV Guide and Radio Guide These guides will give you an overview of programme information from the TV/Radio channels. Step to different channel numbers with the UP/DOWN buttons. If you stop on a highlighted line and press OK, you will exit the menu and enter the highlighted channel. Select info
Краткое содержание страницы № 18
Rearrange List If you have created several Favorite lists you can determine the sequence in which the lists will appear. To rearrange channels, select the list which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK. Rename List You can change the list name with the virtual keyboard on the screen. Type in the text you want using the remote control arrow keys. Please note that the All TV , All Radio , Free TV and Free Radio can n
Краткое содержание страницы № 19
Rearrange Channels You can arrange the order of channels within your favorite lists. To rearrange channels, select the channel which you want to move using the OK button. Move the channels to the desired position using the UP/DOWN button and press OK. Remove Channels From here, when the All TV list is selected in the Edit Channels menu, you can remove channels. Please note. Channels deleted this way will be permanently removed. The only way to get them back is to perform a new channel search. To
Краткое содержание страницы № 20
Change access code From here you can change the access code from the standard 1234. DO NOT FORGET IT! Without it you do not have access to any of the functions where the code is required! If you forget it, you have to contact an Authorized Nokia Service Center to get help. Language Settings From here you can change the language for the menus, main audio language and alternative audio language. System Settings From here you can adjust settings concerning your TV. TV Screen Format: Select your TV
