Краткое содержание страницы № 1
L5AB2/XE (VCC-WB2000P) GB 2002, 7, 24
INSTRUCTION MANUAL
VCC-WB2000P
Network Camera
About this manual
Before installing and using this unit, please read this manual carefully. Be sure to keep it handy
for later reference.
Краткое содержание страницы № 2
Contents Precautions....................................................... 2 Alarm Setting...................................................36 External Alarm Sensor Settings............36 Features ............................................................ 3 MOTION DETECTOR SET Settings .......38 Accessories ...................................................... 3 Alarm Data Recording Capacity............39 Operating environment....................................4 Expansion memory cards.....
Краткое содержание страницы № 3
Precautions In case of problem Protect from humidity and dust Do not use the camera if smoke or a strange To prevent damages to the camera, do not odour comes from the unit, or if it seems not to install it where there is greasy smoke or steam, function correctly. Disconnect the power cord where the dampness may get too high, or where immediately, and consult your dealer (or a there is a lot of dust. Sanyo Authorized Service Centre). Protect from high temperatures Do not open or modify Do not in
Краткое содержание страницы № 4
Features Accessories Web Server Function 1 Setup CD-ROM . . . . . . . . . . . . . . . . . . . 1 pc. This camera is equipped with a web server 2 Lens iris plug (4-pin) . . . . . . . . . . . . . . . 1 pc. function. The camera can be accessed using a computer’s web browser in order to view the 3 Clamping core . . . . . . . . . . . . . . . . . . . . 2 pc. camera images. In addition, up to a maximum of 16 users can simultaneously access a single camera on the network. Network Connections This camera
Краткое содержание страницы № 5
Operating environment The camera requires the following conditions to operate. ® ® OS: In this manual, the Microsoft • Windows ® 98 operating system, the Microsoft ® Windows Millennium Edition operating ® ® system, the Microsoft Windows 2000 ® operating system and the Microsoft ® Windows XP operating system are all referred to as Windows. Microsoft and Windows are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. ® ® CPU: Intel • Pentium I
Краткое содержание страницы № 6
Name and Function of Each Part 4 5 3 PC CARD MONITOR ETHERNET RS-232C OUT 1 6 AC24V GND COM PC POWER 1 2 3 7 MODEM DC12V ALARM IN OUT CLASS 2 WIRING 2 1 Lens mount cap 3 Flange back locking screws (p. 8) Attach this cap to protect the lens mounting 4 Flange back adjustment dial (p. 8) section. When using the camera, remove the cap and attach the automatic iris-type lens 5 PC CARD slot (sold separately). Use this slot to insert a memory card or wireless LAN card. 2 Camera mounting bracket Note:
Краткое содержание страницы № 7
Name and Function of Each Part I PC CARD H MONITOR ETHERNET RS-232C OUT 8 G AC24V GND COM PC POWER 1 2 MODEM DC12V ALARM IN OUT CLASS 2 WIRING JF 9 8 Link indicator G RS-232C connector This indicator illuminates when the camera is Use this connector to connect the camera to connected to a network. It flashes while data a modem for transmission of data along transmission is in progress. telephone lines, or for connecting the camera to a computer. 9 ALARM terminals Use the PC/MODEM select sw
Краткое содержание страницы № 8
Attaching the Lens Use a DC-type automatic iris-type lens (sold separately). 1 Remove the lens mount cap. 3 Connect the lens iris plug to the lens iris output connector of the camera. Lenses from other manufacturers may have different plug shapes and specifications. In such cases, you may need to rewire the lens iris plug. (–) control coil (+) drive coil 1 3 (+) control coil (–) drive coil 2 4 2 Attach the CS mount-type lens. 2 1 2 1 Note: 4 3 The “L” part of the lens 4 3 should be 5 mm or less
Краткое содержание страницы № 9
Flange Back Adjustment The flange back is the distance between the lens (sold separately) and the image capturing surface of the camera. It is adjusted at the time of shipment from the factory to accommodate the types of lenses that are generally assumed to be in use. Accordingly, the flange back does not normally need to be adjusted. However, if attaching a zoom lens and changing from wide angle to telephoto, the images may not be captured in proper focus, and so in such cases the flange back s
Краткое содержание страницы № 10
Connections Turn off the power for all equipment before making any connections. Basic Connections 1 Connect the camera to a computer. Connect a cable between the ETHERNET connectors of the camera and the computer. Use a crossed wire-type Ethernet cable. 2 Connect the power supply. When using this unit, the supplied clamping core A must be installed on the power cord, in order to prevent electromagnetic interference to the other devices connected. • If using a commercially-available 24 V AC adapt
Краткое содержание страницы № 11
Connections Connecting to a LAN Connecting to a Wireless LAN Use an Ethernet cable to connect the This camera can be connected to wired LANs ETHERNET connector of the camera to the using an Ethernet cable, and it can be LAN’s Ethernet switching hub. connected to wireless LANS. Use a straight-type Ethernet cable. To connect the camera to a wireless LAN, insert a wireless LAN card into the PC CARD slot of the camera. You should use only the recommended wireless LAN cards and PC CARD access poi
Краткое содержание страницы № 12
Connections PPP (Dial-up) Connections If connecting the camera using PPP, you will need to install the Network Archiving software (sold separately). In addition, the data that is transmitted via PPP connections consists of alarm images and alarm information. In addition to the connection method shown below, you can also connect the camera to an ISDN terminal adapter and use the Network Archiving software. Refer to the documentation provided with the Network Archiving software for further details
Краткое содержание страницы № 13
Network Camera Settings In order to use the camera as a network camera, you must make the following settings in the order given. When making network connection settings, the network settings must always be made first. 1 Installation of Plug-in Software (p. 13) Use the accessory setup CD-ROM to set up the computer. 2 Computer and Camera Connections (p. 16) Connect the computer and the camera directly, and access the camera using the computer’s web browser. 3 Network Connection Settings (p. 18) Mo
Краткое содержание страницы № 14
Network Camera Settings 1 Installation of Plug-in Software Install the plug-in software (on the setup CD-ROM) onto the computer that is to be used. Installing the plug-in software makes it possible to view live images from network cameras using the computer’s web browser. 1 Turn on the power for the computer. 6 Click the [Next] button. After Windows has loaded, continue to the next step. 2 Insert the setup CD-ROM into the CD-ROM drive of the computer. 3 Click “Start” and then click “Run”. 7 Read
Краткое содержание страницы № 15
Network Camera Settings 8 Type in your username and organization 10 Click the [Finish] button. name, and then click the [Next] button. This completes the installation of the plug-in software. 9 Click the [Install] button. Installation of the software will start and the window display will change to show the (Uninstalling the plug-in software) installation progress. To uninstall the plug-in software, select “Add/Remove Programs” from the Windows Control Panel, and delete “J2KCORE”. – 14 – English
Краткое содержание страницы № 16
Network Camera Settings Browser Settings Cookie Settings Check that the Security settings for Microsoft The camera uses cookies. Internet Explorer are set as described below. If using Internet Explorer Version 6.0 as the web Select Internet Options from the Tools menu, browser, select Internet Options from the Tools click the Security tab and then click the Custom menu, click the Privacy tab and then move the Level button to display the settings. slide bar to the “Medium” position. Note: If usin
Краткое содержание страницы № 17
Network Camera Settings 2 Computer and Camera Connections Once the plug-in software has been installed, use the computer’s web browser to access the camera. Note: The network camera handles large volumes of image data that has been compressed into JPEG2000 format. In order to provide smooth access to the camera, you should close any other applications that you do not need to have open. 1 Click on the Network icon in the 6 Type in “ID3” as the Username and computer’s Control panel, and then set “
Краткое содержание страницы № 18
Network Camera Settings Accessing Without Setting a 3 Turn the camera off and then back on Password again. Normally you need to type in a password at the The live images will be displayed directly in password entry screen in order to display the the live image screen. live image screen. However, if you make the Note: settings described below, you can view the live image screen without having to type in a • If the ID1 setting is deleted in the PASSWORD box, the camera will start up automatically
Краткое содержание страницы № 19
Network Camera Settings 3 Network Connection Settings (Closing the initial window) 1 Select the desired language (e.g. English) To change the language or in the language selection window, and stop tasks such as live then click the [SET] button. image monitoring, click the The main menu window will be displayed. network disconnect button. Available languages: English, French, German, Spanish “SANYO NETWORK CAMERA, THE UNIT IS DISCONNECTED!” will be displayed, and the camera will be disconnected f
Краткое содержание страницы № 20
Network Camera Settings A NETWORK SET Settings These settings are used in order to connect the camera to the network. Note: Check with the network system administrator for details on settings related to the network itself, such as IP address settings. Default settings displayed Reset if necessary 1 2 3 4 1 Click the [NETWORK] button in the main 2 Set the password. menu. There are three access levels available (User, Operator and Administrator) and separate passwords can be set for each level. Th
