Краткое содержание страницы № 1
user's manual D series
D400.2
D650.2
D1000.2
D350.4
D500.4
s i s j u s t n o i s e
e v e r y t h i n g e l e
Краткое содержание страницы № 2
D - SERIES USER'S MANUAL Specifications 3 Features 4 About Built-In Crossovers 5 About Protection Circuitry 5 Amplifier and 2 Ohm Operation 5 Electrical Wiring 6 Power Fuses 6 Mounting the Amplifier 6 Low Input And Line Output Wiring 7 High Input Wiring 7 Two Channel Speaker Wiring 8 Bridged Speaker Wiring With a Two Channel Amplifier 8 Tri-Mode Speaker Wiring With a Two Channel Amplifier 9 Four Channel Speaker Wiring 10 Bridged Speaker Wiring With a Four Channel Amplifier 10 Dual Tri-Mode Speak
Краткое содержание страницы № 3
Congratulations on your purchase of a SOUND STORM LABORATORIES car audio power amplifier. D-SERIES amplifiers are designed, and engineered in the USA to the highest level of quality, and will afford you years of listening enjoyment. All D-SERIES amplifiers utilize regulated MOSFET power supplies, which assure that switching response is extremely fast and output power is clean. Thank you for making SOUND STORM LABORATORIES your choice for car audio equipment! MODEL D400.2 D650.2 D1000.2 RMS
Краткое содержание страницы № 4
Two Channel Amplifiers: D400.2, D650.2 and D1000.2 Amplifiers Two Channel Bridgeable Amplifier Tri-Mode Operation Heavy Duty Aluminum Alloy Heatsink Class A-B Operation Variable Low And High Pass Crossovers Variable Input Gain Control Variable Treble And Bass (0dB ~ +12dB) Line Output Nickel Plated RCA Low Level High Impedance Inputs High Level Low Impedance Inputs Remote Turn On And Turn Off Circuit MOSFET Pulse Width Modulated Power Supply 2 Ohm Stable Stereo Operation Soft Turn-On Circuit T
Краткое содержание страницы № 5
Built-in Crossovers All D-SERIES amplifiers feature built-in electronic crossovers. The 2 Channel amplifiers(D400.2/D650.2/D1000.2) feature an adjustable low pass and high pass cross -overs and +12dB variable Bass Boost. The 4 Channel amplifiers(D350.4/D500.4) feature a pair of individually adjustable low pass crossovers and high pass crossovers, as well as and +12dB variable Bass Boost. All D-SERIES amplifiers have been designed with 100% MOSFET power supplies, ensuring extremely quick switch
Краткое содержание страницы № 6
Electrical Wiring All SOUND STORM LABORATORIES D-SERIES amplifiers are equipped with easy top access screw terminals. These terminals are Nickel Plated in order to ensure excellent electrical contact, and to resist corrosion. When making electrical connections to the amplifier, please observe the following: Use at least 8 gauge or heavier wires for power and ground connections. Wire the amplifier directly to the car battery. For the ground connection, use the shortest possible wire to
Краткое содержание страницы № 7
Low Input / Line Output Wiring If the HIGH LEVEL INPUTS are used, do not use the LOW LEVEL RCA inputs at the same time. The 2-Channel amplifiers use ONE High Level input for both channels and the 4-Channel amplifier use TWO of these connectors-one for each pair of channels. Two Channel Amplifiers: D400.2, D650.2 and D1000.2 Amplifiers Remote To OUTPUT Subwoofer Level To INPUT ADDITIONAL Control of HEAD UNIT AMPLIFIER Four Channel Amplifiers: D350.4 and D500.4 Amplifiers To INPUT ADDITI
Краткое содержание страницы № 8
TWO Channel Speaker Wiring Two Channel Amplifiers: D400.2, D650.2 and D1000.2 Amplifiers GROUND To REMOTE OUTPUT from HEAD UNIT LEFT To BATTERY SPEAKER RIGHT SPEAKER Bridged Speaker Wiring Connect the NEGATIVE SPEAKER TERMINAL to the RIGHT CHANNEL NEGATIVE AMPLIFIER TERMINAL Two Channel Amplifiers: D400.2, D650.2 and D1000.2 Amplifiers Connect the POSITIVE SPEAKER TERMINAL to the LEFT CHANNEL POSITIVE AMPLIFIER TERMINAL GROUND To REMOTE OUTPUT from HEAD UNIT To BATTERY SPEAKER IMPEDANCE 4-8 OHMS
Краткое содержание страницы № 9
Tri-Mode Speaker Wiring Tri-Mode Operational Output is a unique feature which allows a Crossover (Subwoofer) to Be operated in MONO mode, while the main speakers are playing in STEREO. To engage the amplifier in this mode, place the Crossover (Subwoofer) switch in the "OUT"position. Use a 100v non-polar capacitor for a high pass crossover and a wire coil inductor to block high frequencies from the Crossover (Subwoofer) as shown in the figure below. Please review the table below for inductor a
Краткое содержание страницы № 10
Four Channel Speaker Wiring Four Channel Amplifiers: D350.4 and D500.4 Amplifiers CH3 CH4 SPEAKER SPEAKER GROUND To REMOTE OUTPUT from HEAD UNIT To BATTERY CH1 CH2 SPEAKER SPEAKER Bridged Speaker Wiring Four Channel Amplifiers: D350.4 and D500.4 Amplifiers SUBWOOFER SPEAKER IMPEDANCE CH3/4 SPEAKER 4-8 OHMS! GROUND To REMOTE OUTPUT from HEAD UNIT SPEAKER IMPEDANCE To BATTERY SUBWOOFER 4-8 OHMS! CH1/2 SPEAKER 10
Краткое содержание страницы № 11
Dual Tri-Mode Speaker Wiring Tri-Mode Operational Output is a unique feature which allows a Crossover (Subwoofer) to Be operated in MONO mode, while the main speakers are playing in STEREO. To engage the amplifier in this mode, place the Crossover (Subwoofer) switch in the "OUT" position. Use a 100v non-polar capacitor for a high pass crossover and a wire coil inductor to block high frequencies from the Crossover (Subwoofer) as shown in the figure below.Please review the table below for induc
Краткое содержание страницы № 12
Precautions Before you drill or cut any holes, investigate your car's layout very carefully. Take care when you work near the gas tank, fuel lines, hydraulic line and electrical wiring. Do not operate the amplifier when it is un mounted. Attach all audio system components securely within the automobile to prevent damage, especially in an accident. Do not mount this amplifiers so that the wire connections are unprotected or likely to be damaged by nearby objects. Before making or breaking powe
Краткое содержание страницы № 13
Troubleshooting Before removing your amplifier, refer to the list below and follow the suggested procedures, Always test the speakers and their wires first. No Output Confirm that all terminal strip connections are secure and tight. Check both in-line and built-in fuses. Both the "+12v" and the "REMOTE" terminals must have +12v referenced to chassis ground. Confirm that the audio signal source (car audio, equalizer, etc.) is connected and is supplying output signal. To chec
