Краткое содержание страницы № 1
™ ®
Cajun P550R /P580/P880/P882
Switch Release Notes v5.2.2
Overview
These release notes support the Cajun switch software version
5.2.2 (v5.2.2) for the Cajun P550R, P580, P880, and P882 switches.
Release notes are periodically updated with pertinent information.
For detailed information about your product, refer to the basic set
of user documentation.
You can download software and access the latest release notes and
other documentation at:
http://www.avayanetwork.com/
These release note
Краткое содержание страницы № 2
New Hardware and Software Features Version 5.2.2 provides support for the following new hardware software features. Hardware ■ 80-series, 48-port, 10/100 Ethernet Module with Telco connectors (M8048R-100TC) ■ 48-volt power supply for the P580 Software Features Support for: ■ The following Queue Classification and Queue Servicing features: — Classification of switch port traffic. — Classification of layer 2 tagging. — Classification of layer 3 traffic (by means of an access control list). —
Краткое содержание страницы № 3
■ Relay Agent Information option (option 82) for Dynamic Host Configuration Protocol (DHCP). When forwarding client-originated DHCP packets to a DHCP server, the Cajun switch inserts this option, which contains information about the switch. The DHCP server uses this information to authenticate the client. For information on how to enable option 82, see "Enabling Option 82 for DHCP" on page 12 of this document. ■ Enhancement of the MAC Address Lock feature. This feature has been availabl
Краткое содержание страницы № 4
Supported Product Binaries and Boot Codes Table 1 shows the product binary files and boot codes that are supported by v5.2.2 of the Cajun switch software. * Note: Before downloading and running v5.2.2, remove port mirrors with piggyback ports on 80-series modules. Table 1. v5.2.2 Product Binary and Boot Files Type of Switch Binary File Boot File P550R m5500r_v5.02.02.bin m550boot_v5.00.01.bin P580 m8000r_v5.02.02.bin m8000boot_v5.00.01.bin P880 m8800_v5.02.02.bin m880boot_v5.00.01.bin P882
Краткое содержание страницы № 5
Classification of Traffic You can classify traffic by: ■ 802.1p tag priority (default) ■ Physical source port ■ IP characteristics of the frame (source address, destination address, and so forth) Frames are classified into eight priorities, or classes, ranging in number from 0 to 7. By default, the switch uses the priority from the 802.1p tag field, if present, to assign a priority to a frame. You can alternately set each physical port with a priority that ranges from 0 to 7. The switch the
Краткое содержание страницы № 6
WFQ Queue-Servicing Algorithm You can configure the WFQ service policy. The WFQ policy implemented in the Cajun II Queue Classification and Servicing sub-system is a variation of the textbook WFQ algorithm. In Cajun II WFQ, each queue is assigned a weight increment. The weight increment never varies; however, each queue also maintains an accumulated weight, which is updated after each queue service cycle. Queues are serviced based upon their relative accumulated weights. In each queue ser
Краткое содержание страницы № 7
Configuring Port Mirroring By Using the CLI Use the following CLI commands to configure port mirroring on 80- series modules. You must be in Global Configuration command mode to enter these commands. * Note: For information on how to enter Global Configuration command mode, see “Accessing/Exiting the Command Modes” in chapter 1 of Cajun P550R/P880/P882 Command Reference Guide. Setting Up Port To set up port mirroring, use the following CLI command: Mirroring >(config)# set port mirror fa
Краткое содержание страницы № 8
Table 2. Port Ranges for 80-Series Port Mirroring Module Port ranges that you can mirror 4-port gigabit modules 1–2 3–4 Any single port You can mirror any four single ports simultaneously (one port per channel). However you cannot mirror a port range and a single port within that range simultaneously. Example: You can mirror port 1 on channel 1, port 2 on channel 2, and port 3 on channel 3 simultaneously. However, you cannot mirror ports 1 through 2 on channel 1 and port 2 on
Краткое содержание страницы № 9
Table 2. Port Ranges for 80-Series Port Mirroring Module Port ranges that you can mirror 24-port 10/100 modules 1–12 — any 1 port or the entire range. 13–24 — any 1 port or the entire range. If you mirror a single port, you can mirror only 1 port per range at a time. Example: You can mirror port 1 on channel 1 and port 13 on channel 2 simultaneously. However, you cannot mirror port 1 on channel 1 and port 2 on channel 2 simultaneously. 48-port 10/100 modules 1–12 — any 1 por
Краткое содержание страницы № 10
* Note: Avaya recommends that you mirror traffic to a port of the same speed or faster than the source port. ■ is the mirror channel that you want to use (1-4). ■ {TX| RX |Both} is the direction of traffic that you want to mirror. * Note: You can mirror transmit traffic of only one source port to the mirror port. You cannot mirror transmit traffic of multiple source ports to one mirror port. ■ {always | disable | periodic} is how often you want the mirror port to receive traf
Краткое содержание страницы № 11
Configuring Port Mirroring By Using the Web Agent Setting Up Port To use the Web Agent to set up port mirroring: Mirroring 1. Expand the Modules & Ports folder. 2. Click Port Mirroring. The Port Mirroring Information page opens. 3. In the Source Port column, select the port that you want to mirror. 4. In the Mirror Port column, select the port to which you want to mirror traffic. Both the source port and mirror port must either: — Be on the same vlan and have the same vlan binding or — H
Краткое содержание страницы № 12
Removing Port To use the Web Agent to remove port mirroring: Mirroring 1. Expand the Modules & Ports folder. 2. Click Port Mirroring. The Port Mirroring Information page opens. 3. In the Source Port column, select None for the port mirror that you want to remove. 4. Click Apply. Viewing To use the Web Agent to view information about port mirroring: Information about Port 1. Expand the Modules & Ports folder. Mirroring 2. Click Port Mirroring. The Port Mirroring Information page opens
Краткое содержание страницы № 13
2. Enable or disable the suboptions as appropriate in the DHCP Option - Circuit Info and DHCP Option 82 - Agent Info fields. Changing the Status of Option 82 by Using the CLI To use the CLI to change the status of option 82, enter Global Configuration mode and use the following commands: ■ To enable suboption 1, use the following command: >(config)# ip dhcp circuit-info ■ To enable suboption 2, use the following command: >(config)# ip dhcp agent-info ■ To disable suboption 1, use the followi
Краткое содержание страницы № 14
Enabling Traps for Unknown Source Addresses To enable traps for unknown source addresses, you must first enable the MAC Address Lock feature. You can enable this feature and traps for unknown source addresses by using the Web Agent, CLI, or SNMP. Enabling MAC Address Lock and Traps by Using the Web Agent To use the Web Agent to enable the MAC Address Lock feature and traps for unknown source addresses: 1. Manually add the “permitted” MAC addresses to the Address Forwarding Table (AFT). F
Краткое содержание страницы № 15
2. Use the following command to manually add the “permitted” MAC addresses to the Address Forwarding Table (AFT): >(config)# set aft entry vlan port- binding forward 3. Use the following command to disable learning on a port or port range: >(config)# set port allow-learning disable 4. Use the following command to enable known-mode on a port or port range: >(config)# set port known-mode enable * Note: To preve
Краткое содержание страницы № 16
Table 4. MIB, MIB Items, and OIDs for MAC Address Lock MIB MIB Item OID ProminetMib.txt, promL2AddressControlIndex 1.3.6.1.4.1.2167.5.1.4.3.1.1 version 5.2 promL2AddressControlMacAddress 1.3.6.1.4.1.2167.5.1.4.3.1.2 promL2AddressControlPortBinding 1.3.6.1.4.1.2167.5.1.4.3.1.3 promL2AddressControlVlanID 1.3.6.1.4.1.2167.5.1.4.3.1.4 promL2AddressControlPriority 1.3.6.1.4.1.2167.5.1.4.3.1.5 promL2AddressControlPersistence 1.3.6.1.4.1.2167.5.1.4.3.1.6 2. Use the MIB item that is listed in Table 5
Краткое содержание страницы № 17
Enhancements The following events are now logged in the event log: ■ Saving the running configuration to the startup configuration ■ Creating an IP interface ■ Modifying an IP interface ■ Deleting an IP interface Changed CLI Commands ■ The get Fabric_mode command replaces the get Cajun_mode command. ■ The set Fabric_mode command replaces the set Cajun_mode command. Corrected Problems The following problems have been corrected in this release: ■ Pulling the base port on a hunt group no longe
Краткое содержание страницы № 18
Known Problems and Workarounds The following known problems and workarounds apply to Cajun P550R, P580, P880, and P882 switches that are running switch software, v5.2.2. If a known problem has a viable workaround, it immediately follows the Problem statement. If the known problem has no viable workaround, it is listed as a bulleted statement. ARP Problem: 50-Series and 80-Series modules lose ARPs after you perform an initialization of NVRAM (NVRAM init). Workaround: Reboot the switch twic
Краткое содержание страницы № 19
Workaround: Use the following table to determine the option that corresponds to the rate that you want to set. Table 8. Flood Rate Limiting on 80-Series 10/100 Modules Desired Rate Web or CLI Setting 80% 10% 40% 5% 20% 2% 10% 1% * Note: Do not use the 20%, 40%, or 80% options of the Web Agent or CLI. Frames Transmitted with Cyclic Redundancy Check (CRC) Errors Problem: For certain revisions of the Cajun P550R/P580/P880/P882 switch 12- and 20-port module (Model M5520-100TX, module Type 9
Краткое содержание страницы № 20
Hot Swap Modules The following problems have no workaround: ■ Hot swapping 50-series modules may cause SEPROM and SMAC panic messages to appear in the event log. These messages are for informational purposes only and should be ignored. ■ When you insert a module into the switch, traffic may be affected for up to seven seconds while the module performs its hardware diagnostics. IGMP Group Membership Table Problem: The IGMP Group Membership Table does not display all members when viewed fr
