Краткое содержание страницы № 1
8x8 HDMI Matrix Switch with 3D
over CAT-5 with IR Pass-Through
Model #: SW-HDM3D-C5-8X8
© 2009 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time wi
Краткое содержание страницы № 2
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited. Table of Contents Section 1: Gettin
Краткое содержание страницы № 3
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supp
Краткое содержание страницы № 4
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction The Avenview SW-HDM3D-C5-8X8, HDMI Matrix Switch with 3D over CAT-5 with IR Pass-Through provides
Краткое содержание страницы № 5
www.avenview.com 5
Краткое содержание страницы № 6
- Silicon Image chipset embedded for best quality, compatibility and reliability - Support HDMI Deep Color & full 3D - HDCP compliant - Allows any source to be displayed on multiple displays at the same time - Allows any HDMI display to view any HDMI source at any time - Supports 7.1 channel digital audio - Supports default HDMI EDID and learns the EDID of displays - The matrix master can switch every output channels to any HDMI inputs by push-in button, IR remote control, or RS-232 cont
Краткое содержание страницы № 7
1.7 Panel Description 1.7.1 SW-HDM3D-C5-8X8 Front Panel 1. Power: Power Control 2. Seven Segment LED Indicators: LED display for output ports and input channels 3. Front Panel Push Buttons: Front panel push 4. IR SENSOR: IR sensor for receiving the IR buttons used to select the number of input commands from the IR remote source and display channel 1.7.2 SW-HDM3D-C5-8X8 Rear Panel 1. RS232: RS-232 control port 2. SW 1-8: DIP Switch 3. HDMI 1 – 8: HDMI Inputs 4. IR OUTPUT 1 – 8:
Краткое содержание страницы № 8
1.7.3 HDM3D-C5SW-R 1. IR INPUT: Plug in IR receiver. 2. +5V DC: Spare power jack for over 60m transmission when the RX may need external power to work. 3. HDMI SIGNAL: Plug in the CAT5 connected to the 4. IR SIGNAL: Plug in the CAT5 connected to the respective A/V SIGNAL port on the respective CHANNEL CONTROL port on the SW-HDM3D-C5-8X8 SW-HDM3D-C5-8X8 5. INPUT : Display the current showing HDMI source 6. INPUT SELECT: Push button for switching input channel source channel in sequen
Краткое содержание страницы № 9
1.7.4 Dip Switch for EDID & Audio Settings (SW1 – SW8) DIP Switch Position Video Audio Description PIN # 1 PIN # 2 1 OFF OFF 1080p Surround Default Mode 1 : EDID up to 1080p video & surround sound audio output up to 7.1ch (DTS-HD Master & Dolby TrueHD) 2 OFF ON Up to 1080p Stereo Default Mode 2: EDID up to 1080p video and stereo audio for basic compatibility among HDTVs 3 ON OFF Up to Stereo Safe Mode : EDID up to 720p/1080i video and stereo 720p/1080i audio for basic co
Краткое содержание страницы № 10
1.7.5 SW Main Dip Switch for Firmware Update DIP Switch Position PIN # 1 PIN # 2 PIN # 3 PIN # 4 OFF OFF OFF OFF Normal Operation Mode 6 [via RS-232 port] ON OFF OFF OFF Firmware Block A [main] 7 Update Mode ON OFF ON OFF Block B [remote] ON ON OFF OFF Block C [HDMI] 6 Factory default for SW Main is pin#1-OFF [ ], pin#2-OFF [ ], pin#3-OFF [ ], & pin#4-OFF [ ]. PLEASE MAINTAIN THIS SETTING AT ANYTIME FOR REGULAR USE VIA RS-232 CONTROL! 7 Sequenc
Краткое содержание страницы № 11
1.8 IR Control Patch IR Transmitter Cable IR Receiver Cable The default location for IR emitter extension cable to transmit all IR command signals received IR Main from any of the four remote receivers to all of the HDMI sources. IR emitter extension cable connected here can only transmit IR command signals from the IR1 remote receivers that are setting at the input channel 1. IR emitter extension cable connected here can only transmit IR command signals from the IR2
Краткое содержание страницы № 12
1.9 Installation (SW-HDM3D-C5-8X8) To setup Avenview SW-HDM3D-C5-8X8 follow these steps for connecting to a device: 1. Connect all sources to HDMI Inputs on the 8X8 HDMI over CAT5 Matrix Switch (SW-HDM3D-C5-8X8) 2. Connect each DDC output on the SW-HDM3D-C5-8X8 to respective DDC input on the remote receiver HDM3D-C5SW-R 3. Connect each TMDS output on the SW-HDM3D-C5-8X8 to respective TMDS input on the remote receiver HDM3D-C5SW-R 4. Connect IR emitter cable to the SW-HDM3D-C5-8X8 and
Краткое содержание страницы № 13
1.10 Operation and IR Control 1.10.1 Source Side 1.10.1.1Method A: Push Button 1. Use the “ ” or “—“ channel button on output port to select which port to be changed. “ ”: change selected output port in ascending order “—“: change selected output port in descending order 2. Push the “ ” or “—“ channel button on Input channel to select the HDMI input source you want to display on this selected output port in step 1 in sequential order. Once you reach the desired input channel you want
Краткое содержание страницы № 14
1.10.2 Display Side 1.10.2.1Method A: Push Button Press the INPUT SELECT push button to switch the input source on the respective output port connected to the matrix receiver in sequential order. The selected input source will be displayed on the LED of INPUT CHANNEL. 1.10.2.2Method B: IR Remote Control for Switching Input Channels Please decide which input channel to be selected by pressing Source Selection 1 to Source Selection 8. Or you can use left and right button to enter IR contr
Краткое содержание страницы № 15
1.11 RS232 Serial Port Control Scan: Press Scan button, the machine will scan the all com port and show them. Select the RS232 serial port connected to the machine. And set device ID 255 is for all device. Only the same device id or 255 can get the command you sent. Press OK. Get the new status from the machine you select. Setting: Press Get button to read back device ID. Press Set button to write device ID. www.avenview.com 15
Краткое содержание страницы № 16
Linkage: Press Linkage button to read back all status Open / Close : Press this button to Close or Open COM Port. Mapping Button: Select All Output: Select “set all output”, then select the source on main menu. You can quickly set all output to the same source. Unselect All Output: Release output selection. Select Input1~8-Output: Select Input Source. Then select the output port icon. For example: Select input source 1. Then select output port one and two. The video and audio wil
Краткое содержание страницы № 17
Group setting First select output ports one by one. Then select the input source. The selected output ports change the setting at the same time. By using Terminal: Baud rate: 9600 Data length: 8bit Parity check: No Stop bit: 1 1.11.1RS232 Commands COMMAND ACTION COMMAND ACTION COMMAND ACTION ST System Status* C5 Output C select Input5 F3 Output F select Input3 VR Firmware Version C6 Output C select Input6 F4 Output F select Input4 A1 Output A select Input1
Краткое содержание страницы № 18
Section 2: Specifications Item Description Units SW-HDM3D-C5-8X8 HDM3D-C5SW-R 8x8 HDMI Matrix Switch with 3D over Unit Description HDMI Matrix Switch with 3D Receiver CAT-5 with IR Pass-Through HDMI Compliance Support HDMI Deep Color & full 3D HDCP Compliance Yes Video Bandwidth Single Link 225 MHz (6.75Gbps) Supported Resolutions 480i / 480p / 720p / 1080i / 1080p60 Full HD: (1080p) ~ 35meter (115feet) (CAT5e) / 40meter (130feet) (CAT6) Resolution and Distance HD: (720p/1080i) ~ 50m
Краткое содержание страницы № 19
Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.3 3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable
Краткое содержание страницы № 20
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
