Краткое содержание страницы № 1
Краткое содержание страницы № 2
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING CAUTION Failure to abide by the information in a WARNING Failure to abide by the information in a CAUTION may result in serious injury and can be life threatening. may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2005 EIZO NANAO CORPORATION All rights reserved. No part of this m
Краткое содержание страницы № 3
PRECAUTIONS IMPORTANT • This product has been adjusted specifi cally for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specifi ed in the specifi cations. • To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor. [Location of Caution Statement] WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disco
Краткое содержание страницы № 4
Краткое содержание страницы № 5
WARNING Handle the power cord with care. • Do not place the cord underneath the unit or other heavy objects. • Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fi re or electric shock. Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely with the enclosed screws. No
Краткое содержание страницы № 6
Краткое содержание страницы № 7
LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark areas on the screen. This is due to the characteristics of the panel itself, and not the product defect. The backlight of the LCD panel has a fi xed life span. When the screen becomes dark or begins to fl icker, please contact your dealer. Do not pr
Краткое содержание страницы № 8
CONTENTS 2-7 Locking Buttons ............................................18 PRECAUTIONS ...................................................... 1 ● To lock operation [Adjustment Lock] ................. 18 LCD Panel ................................................................... 5 2-8 Setting Adjustment menu Display ................ 19 To use the monitor comfortably ............................... 5 ● To update menu settings [Menu Size/Menu Position/Menu Off Timer/ Translucent/Orientation] .
Краткое содержание страницы № 9
Краткое содержание страницы № 10
Краткое содержание страницы № 11
To make useful settings/adjustments Adjustment menu (Refer to below for operation) Page 20 Information/Language ● [Information] to check settings, usage time, etc. ● [Language] to select Adjustment manu language. Set the off timer ● [Off Timer] to set the monitor power off time Page 18 Locking Adjustment ……………………………………… see page 16 ● [Adjustment Lock] to lock operation of the monitor Change the screen size ● [Screen Size] to change screen size Page 18 EIZO Logo Display Setting …………………………
Краткое содержание страницы № 12
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to “readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures. Item Overview For
Краткое содержание страницы № 13
2-2 Screen Adjustment Digital Input Attention • Wait 20 minutes or more from When digital signals are input, images are displayed correctly based on the monitor power on before starting preset data of the monitor. adjustments. (This period of time is required to stabilize the operation of internal Analog Input electronic components.) The monitor screen adjustment is used to suppress fl ickering of the screen or adjust screen position and screen size correctly according to the PC to be used.
Краткое содержание страницы № 14
NOTE Perform advanced adjustments for the following using the 4 • Press the control button slowly so as not to miss the adjustment point. menu of the Adjustment menu. • When blurring, fl ickering or bars ● To eliminate vertical bars [Clock] appear on the screen after adjustment, proceed to [Phase] to remove (1) Choose from the menu, and press . fl ickering or blurring. The menu appears. (2) Adjust the clock with or , and press . The adjustment is completed
Краткое содержание страницы № 15
Adjust the signal output range 5 ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. (1) Choose from the menu, and press . A message “Your setting will be lost it you press AUTO button” appears. (2) Press while the message is displayed. The output range is adjusted automatically to display images with the maximum color gradation. All the adjustments using the “Screen
Краткое содержание страницы № 16
2-3 Color Adjustment Simple adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. ● FineContrast Mode An appropriate display mode is selectable out of fi ve modes. Mode Purpose Custom Available for making desired setting. Suitable for color matching with sRGB compatible sRGB peripherals. Suitable for displaying texts for word processing or Text spreadsheets. Suitable for displaying images such as photos or picture Picture images.
Краткое содержание страницы № 17
Attention Advanced Adjustments [Adjustment menu] • Perform [Range Adjustment] before Independent setting and saving of color adjustment are available for each starting color adjustment for analog input signals. FineContrast mode. Refer to “To adjust color gradation automatically” on page 12. ● To select an appropriate mode for images • The FineContrast mode cannot be changed during color adjustment. Set ✓: Adjustment/setting available −: Factory setting the FineContrast mode in advance
Краткое содержание страницы № 18
Menu Description Adjustment range Reset To reset the color Select [Reset]. settings of the selected FineContrast mode to the default settings. ● To set/adjust color (1) Choose from the Adjustment menu, and press . (2) Select a desired function from the menu, and press . The selected function menu appears. (3) Adjust the selected item with / / / , and press . The adjustment is completed. 2-4 Off Timer Settings ● To set monitor power-off time [Off Timer] This function allows th
Краткое содержание страницы № 19
2-5 Screen Size Selection ● To change screen size [Screen Size] This function allows you to change the screen size when a low-resolution image is displayed. Menu Function Displays an image in full screen. Images are distorted in Full (default setting) some cases because the vertical rate is not equal to the horizontal rate. Displays an image in full screen. In some cases, a blank Enlarged horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Normal Di
Краткое содержание страницы № 20
2-6 Power Indicator/EIZO Logo Display Setting NOTE ● To turn off the Power indicator while a screen is displayed • The logo appears with the default [Power Indicator Setting] setting. This function enables to turn off the Power indicator (blue) while a screen is displayed. (1) Choose from the Adjustment menu, and press . (2) Choose from the menu, and press . The menu appears. (3) Select “Disable” with or , and press . The Power Indicato
