Краткое содержание страницы № 1
Amplifier Amplifier
Installation stallatio stallat
Guide
SIGNALBOOST™
Dual-Band
Cellular / PCS
Amplifi er
Contents:
Guarantee and Warranty · · · · · · · · · · · · · · · · · · · · · · · · 1
How it Works · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Before Getting Started · · · · · · · · · · · · · · · · · · · · · · · · · · 3
Installation Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · 3
Installing the Antenna (Vehicle) · · · · · · · · · · · · · · · · · · ·
Краткое содержание страницы № 2
30-Day Money-Back Guarantee All Wilson Electronics products are protected by Wilson’s 30-day money-back guarantee. If for any reason the performance of any product is not acceptable, simply return the product directly to the reseller with a dated proof of purchase. 1-Year Warranty Wilson Electronics amplifi ers are warranted for one (1) year against defects in workmanship and / or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof
Краткое содержание страницы № 3
Installation Instructions for the Following Wilson Amplifi er: SIGNALBOOST™ Dual-Band Cellular/PCS Amplifi er Model/Part #811210 / Part #811211 FCC ID: PWO819DA IC: 4726A-819DA Patent Pending The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations were met. Inside this Package 12 V DC power Mini Magnet- SIGNALBOOST™ supply (vehicle) Mount Antenna amplifi er (811211 only) Universal ® VELCRO Cable Wrench connector How it Works Your new Wilson
Краткое содержание страницы № 4
Before Getting Started This guide will help you properly install Wilson’s dual-band, SIGNALBOOST™ amplifi er. It is important to read through all of the installation steps for your particular application prior to installing any equipment. Read through the instructions, visualize where all the equipment will need to be installed and do a soft installation before mounting any equipment. If you do not understand the instructions in full, please contact Wilson Technical Support at 866-294-1660
Краткое содержание страницы № 5
Vehicle Installation Installing the Antenna To receive the best cell signal, select a location in the center of the vehicle’s roof at least 12 inches away from any other antennas and free of obstructions. The antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. The antenna cable may be run through the door to the amplifi er. ! Warning: The antenna used with this amplifi er must have a separation distance of at least 11 inches from all per
Краткое содержание страницы № 6
Vehicle Installation Installing the Wilson SIGNALBOOST™ Amplifi er ! Warning: Do not plug in the DC power supply until the antenna and universal connector cables are attached to the amplifi er. Select a location to install the amplifi er that is away from excessive heat, direct sunlight or moisture and that has proper ventilation. Recommended installation locations are: • Under the seat • Under the dash Run the cable from the antenna and attach it to the FME-Male connector labeled “outside
Краткое содержание страницы № 7
Home/Offi ce Installation Installing the Antenna To receive the best cell signal, select a window location at least 12 inches away from any radio or television antennas and free of obstructions. Using the suction cups, position the optional mounting bracket on the window at a height convenient to where the amplifi er will be located, then attach the antenna to the bracket. The antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. ! Warning
Краткое содержание страницы № 8
Installing the Wilson Universal Connector Amplifi er Universal Connector The universal connector must be placed directly on the cell phone or cellular data card to work properly. Attach the universal connector to the cell phone or cellular data ® card with the VELCRO included in the package. The universal connector and extension cable included in the package are long enough to reach the amplifi er location. This allows for ease and convenience of use. To adjust the universal connector fo
Краткое содержание страницы № 9
Powering up the Amplifi er Make sure both the outside antenna and universal connector cables are connected before powering up the amplifi er. For vehicle use, connect the power cable from the DC power supply to the amplifi er input marked “Power” and insert the large end into DC power socket (the cigarette lighter outlet). For home or offi ce use, connect the Carefully insert the power cable. cable from the AC/DC power supply (sold separately) to the amplifi er input marked “Power” and inser
Краткое содержание страницы № 10
Warnings and Recommendations Warning: Do not plug the amplifi er directly into the cell phone or cellular data card using an antenna adapter. It will damage the cell phone or cellular data card. Warning: Do not plug in the power supply until the antenna and universal connector cables are attached to the amplifi er. Warning: The antenna must be installed with a separation of at least 11 inches from nearby persons and must not be located or operating in conjunction with any other antenna o
Краткое содержание страницы № 11
About Wilson Electronics Wilson Electronics, Inc. has been a leader in the wireless communications industry for nearly 40 years. The company designs and manufactures amplifi ers, antennas and related components that signifi cantly improve cellular telephone signal reception and transmission in a wide variety of applications, both mobile and in-building. With extensive experience in antenna and amplifi er research and design, the company’s engineering team uses a state-of-the-art testing labora
Краткое содержание страницы № 12
Amplifi er Specifi cations Dual Band 800/1900 MHz Specifi cations Model Number 811210 Connectors FME-Male Impedance (input/output) 50 Ohms Dimensions 5 x 3.5 x 1.2 inch or 12.7 x 8.9 x 3 cm Weight 1.03 lbs or 0.468 kg Frequency 824-894 MHz / 1850-1990 MHz 1 Passband Gain (nominal) 800 MHz (uplink/downlink) 26 dB / 26 dB 1900 MHz (uplink/downlink) 26 dB / 26 dB 2 20 dB Bandwidth (nominal) 800 MHz (uplink/downlink) 53 MHz / 62 MHz 1900 MHz (uplink/downlink) 112 MHz / 110 MHz ³Power output for single
