Краткое содержание страницы № 1
Краткое содержание страницы № 2
CONTENTS CONTENTS 2 REMOTE MONITORING Remote Audio Monitoring 26 Activate Remote Audio Monitoring 26 INTRODUCTION Setttting the Remote Audio Unpacking the Ampli600 3 Monitoring Access PIN Code 27 Using Remote Audio Monitoring 27 INSTALLATION Setting Up 4 OPTIONAL ACCESSORIES Wall mount installation 5 Headset 29 DESCRIPTION 6-10 Neckloop 29 Shaker 30 SETTINGS Ringer Volume 11 VOLUME AND TONE Ringer Tones 11 Sending Level Adjustmen
Краткое содержание страницы № 3
INTRODUCTION Congratulations on purchasing your AMPLI600 telephone. This is a multifunction telephone which offers features such as hands free use, phonebook and caller display*. It also has the added benefits of send and receive amplification. There are two emergency features – the first allows you to call emergency contacts either using a remote band or with one touch of a button on the base. The other feature is called remote audio monitoring, this allows your contacts to call and speak
Краткое содержание страницы № 4
INSTALLATION Setting Up Connect the curly cord and the handset. Remove the screw of the battery compartment using the screwdriver pro- vided and open the battery compartment. Insert 4 good quality alkaline batteries (AAA size, 1.5V type, not supplied) into the battery compartment located on the base of the telephone. Note : Do not use rechargeable batteries. Do not put batteries into the household rubbish, pay attention to battery regulations regarding battery disposal. Replace the battery co
Краткое содержание страницы № 5
INSTALLATION Wall Mount Installation Slide the handset hanger bar out and rotate it 180 degrees. Slide it back into place. The hook will now point up. This ensures the handset will not fall out of the cradle when it is mounted on the wall. Plug the 8in short phone cord into the telephone jack on the AMPLI600, now run the phone cord under the wall plate adapter and through the opening. Insert the Wall Plate adapter. Hold it so that the raised mounting pins line up with the phone’s keyholes o
Краткое содержание страницы № 6
DESCRIPTION Priority memories Key to activate tone P1,P2,P3 and volume adjustment Tone reception function adjustment Aerial Speaker Volume Speaker volume reception adjustment adjustment Direct memories Stop SOS SOS key Memory storing key SOS key stop SOS key Hands free dialling & amplifier Remote control Hands free microphone Last number redial Headset button Time break recall button Message waiting / newcall LED Flashing incoming call Mute button indicator (strobe light) 6
Краткое содержание страницы № 7
Краткое содержание страницы № 8
DESCRIPTION Screen example (On hook position) Minutes Power network icon Hours Day Month Cancel key Validation key Up/down keys OK button is used to confirm action or a choice on the screen. ▲ ▼ “UP / DOWN arrow” buttons are used to high- light or scroll through the menu. C button is used to cancel or confirm an action/entry or clear a stored Caller ID call. 8
Краткое содержание страницы № 9
DESCRIPTION Screen display Your CL600 has a screen with different icons which help you to use the telephone. The telephone is supplied by battery + battery indicator The telephone is powered by AC adapter. Memory storing is required. Screen contrast level. “Mute” is activated. Speakerphone is activated. Precede the CID call record number. To show new records. 9
Краткое содержание страницы № 10
Краткое содержание страницы № 11
SETTINGS Ringer Volume The ringer volume can be adjusted as high as 95 +dB. A switch located on right side allows the ringer to be switched to OFF, LOW, HIGH. Your telephone comes with the ringer switched to ‘High’. Ringer Tones Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘SET RING’ Press OK Select desired ring tone. Use ▲ or ▼ to scroll through and listen to the 4 tones available Press OK to select desired ring tone Press C three times to exit or do nothing
Краткое содержание страницы № 12
SETTINGS Dialling Mode The Tone/Pulse is factory pre-set to Tone (Tone). In the US, all telephone exchanges now use Tone dialling. If your phone does not dial out, it is probably being used from an older private switch-board (PBX). In this case, theTone/Pulse setting must be moved to Pulse (Pulse). Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘TONE /PULSE’ Press OK Select ‘TONE’or‘PULSE’ Press OK to confirm Press C three times to exit 12
Краткое содержание страницы № 13
SETTINGS Date / Time Format and setting Format You can choose between Day-Month or Month-Day , and between 12h-24h Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘DATE FORMAT’ Press OK Select ‘DAY-MONTH’or‘MONTH-DAY’ Press OK to confirm Use ▲ or ▼ to select ‘HOUR FORMAT’ Press OK Select ‘12 HOUR’or‘24 HOUR’ Press OK to confirm Press C twice to exit 13
Краткое содержание страницы № 14
SETTINGS Setting Time/date If you subscribe to Caller Display, these parameters will usually be set automatically when you receive your first call. Press MUTE Use ▲ or ▼ to select ‘SET TIME’ Press OK Use ▲ or ▼ to select the desired digit Press OK to confirm and pass to next digit You will set time first then the date Press C to exit Language Setting You can choose between 16 different languages including English and French. The default is American English (English 1). Note: Do not ch
Краткое содержание страницы № 15
SETTINGS Screen Contrast Adjustment Your screen has a backlight that automatically switches off after 15 seconds of inactivity. To decrease or increase the contrast of the backlight: Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘LCD CONTRAST’ Press OK Use ▲ or ▼ to select the contrast level that is correct for you Press OK to exit (it will automatically return to time and date screen) Auto On Hook When this feature is ON, if you leave the telephone off the hook by
Краткое содержание страницы № 16
SETTINGS Auto Screen Sizing –DIM:X-->x The phone can show a maximum of 8 digits at full size. You can choose to see the complete number (up to a maximum of 18 digits) by selecting ‘Auto Screen Sizing’. When activated, the phone will display at full size but automatically switch to display small numbers when there is a number with more than 8 digits. The default on arrival is activated. However, if you ever need to change this setting, see below: Press MUTE Use ▲ or ▼ to select ‘SET PHO
Краткое содержание страницы № 17
SETTINGS Area and Long Distance Code Setting When you use your phone for the first time or if you have moved to a different area code, you need to enter your area code into the phone. This assures that when dialing a call out of memory or your phonebook, the number is formatted properly. To set your area code & LDS Code: Press MUTE Use ▲ or ▼ to select ‘SET PHONE’ Press OK Use ▲ or ▼ to select ‘SET AREA & LDS’ Press OK Use ▲ or ▼ to enter your area code. The phone accommodates up to six (6) d
Краткое содержание страницы № 18
USING THE TELEPHONE Answering A Call During an incoming call, your phone will ring and then the number and/or the name of the caller will be displayed on the screen, if you have subscribed to a Caller Display service. Using the handset ● Lift the handset and speak. ● To end the call, replace the handset. Hands free ● Your Ampli600 allows you to speak hands free. When the phone rings, press SPKR. The caller’s voice will be heard through the loudspeaker and they will hear your voice via the
Краткое содержание страницы № 19
USING THE TELEPHONE Hands free ● Key in the required number without lifting the handset. ● Use the C key if necessary to cancel and correct a wrong digit. ● Press SPKR and the number will be automatically dialled. The speak- erphone symbol will appear on the display. ● When the call is answered, simply speak into the microphone located on the base ● You can adjust the speaker level with the slide button located on the left side of your telephone. ● To end the call, press the hands free button
Краткое содержание страницы № 20
USING THE TELEPHONE Recalling Recent Numbers You can call back any of the last 30 numbers dialed Press OK Screen will display ‘DIALLED’, the last number dialled, total number of numbers dialled plus time and date of displayed number Use ▲ or ▼ to to select the number you wish to dial Lift the handset or press SPKR or press Headset (if headset plugged in), the number will be automatically dialled Deleting Recent Numbers Press OK Screen will display ‘DIALLED’, the last number dialled, total num
