Руководство по эксплуатации Royal Leisure BORDEAUX 6 XL ZG

Краткое содержание страницы № 1

BORDEAUX 6 XL ZG


■ Assemble spring-adjoined poles by inserting each pole-end into the end of
the next pole. Ensure that shaped pole ends are correctly aligned before
joining them. They do not require force (see Pic)
Lay them parallel on the ground.
■ Open flysheet on ground and position tent in
desired direction. Detach zipped canopy but make
sure that all other zips are closed. Also ensure that
all the adjustment straps attached to the flysheet
are slackened off to give the max

Краткое содержание страницы № 2

and secured into metal eyelets ■ Fit together poles marked with yellow bands to form an arch. This fits inside the tent – the side area or annexe. Secure with Velcro fastenings and push the pole’s metal pins into the ground. ■ Insert annexe groundsheet and secure with Velcro straps and other fastenings. ■ Peg out annexe anchor straps and guylines, You will now need to zip groundsheet onto the base of the inside of flysheet with corresponding zips. ■ Open out three inner tents inside the

Краткое содержание страницы № 3

PIN AND PEG Pin and Ring system Each end of the tent poles fits onto a corresponding metal pin. The metal pin fits into the metal ferrule on the end of each pole (Fig 2). It may require a little extra force to push the pole into an arch to fit it into the second pin. Some pins are located close to each other. Refer to the pole points to check that you are selecting the right pin. Rings attached to pins are to be pegged to the ground to secure the position of the poles and maintain the sha