Руководство по эксплуатации JL Audio Stealthbox SB-D-DRNGO/10W0

Краткое содержание страницы № 1

®
Stealthbox
INSTALLATION GUIDE START
HERE
for the
SB-D-DRNGO/10WØ
➔ ➔ ➔
(Fits 1997-2001 Dodge Durango, models
with three seating rows only)
STEP 1: Unbolt the second row of seating STEP 2: Remove the black plastic covers STEP 3: Remove the four Torx bolts that
from the vehicle and remove as single unit. from each side of the armrest, of the center attaches the armrest to the center seat.
seat.
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read

Краткое содержание страницы № 2

Cont. From Previous Page ➔ ➔ STEP 9: Bolt the supplied brackets to the the STEP 10: Place the Stealthbox on the seat Stealthbox using two of the bolts removed frame where seat cushion was removed from. from the armrest in Step 3. Do not tighten Be sure the two studs in the front edge of the these bolts yet. Stealthbox fit into the two holes drilled in Step 8. ➔➔ STEP 11: Thread the supplied nuts on the STEP 12: Using the two remaining factory two studs and tighten securely. bolts from the armres

Краткое содержание страницы № 3

Cont. From Previous Page CONGRATULATIONS! INSTALL COMPLETE. ➔ ➔➔ ➔ Included Hardware: STEP 13: Attach the plastic clips on the STEP 14: Run speaker wire from the amplifi- STEP 15: Place the seat back in the vehicle (4) 1/4" x 2" Bolts Stealthbox upholstery to the bars under the er to the Stealthbox mounting location. Be and connect the speaker wires to the (4) 1/4" Washers seat structure. sure the wires are routed in such a way that Stealthbox. (4) #8 Flat Head Screws they will not be pinched wh