Краткое содержание страницы № 1
1 ON OFF
2 ON OFF
3 ON OFF
4 ON
OFF
• •
•
–
+
Programmer/Remote
Cat. RZCPG
USER GUIDE
TM
Compatible with enabled products!
Краткое содержание страницы № 2
TABLE Of CONTENTS INTRODUCTION .......................................................1 MENU NAVIGATION & ICONS .............................2–4 STARTUP...................................................................4 INSTALLATION CHECKLIST ...................................5 Include Dimmers/Switches ....................................5 TEXT EDITOR .......................................................6 Include Controller ...........................................6, 7 Update Controller
Краткое содержание страницы № 3
1 ON OFF 2 ON OFF 3 ON OFF 4 ON OFF • • • – + INTRODUCTION Leviton’s Programmer/Remote, Cat. No. RZCPG, is a TM multi-functional device. It uses Z-Wave technology to act as a programmer, zone or scene controller, TM remote for setting up and operating your Vizia RF network. This manual will guide you through the understanding of your RZCPG functions as a setup controller. Once your network is installed, your RZCPG may also be used as a wireless controller for controlling your lighting sy
Краткое содержание страницы № 4
MENU NAVIGATION and ICONS Navigating screens and menus on your RZCPG is accomplished using the following buttons: LCD Display x1 -RZCPG- (HOME screen Default Profile 1. Area #1 depicted) 2. Area #2 3. Area #3 Left 4. Area #4 Stand By Menu Soft Key Right Soft Key Arrow Buttons Center (up, down, Button left, right) 1 ON OFF "–" "+" x1 OFF Button 2 ON Button OFF 3 ON 12:00 PM x1 4 ON OFF Mon 05.01.2006 12:00 PM From the HOME Screen, pressing buttons 1, 2, 3, 4 Mon 05.01.2006
Краткое содержание страницы № 5
x1 x1 12:00 PM x1 Mon 05.01.2006 12:00 PM Mon 05.01.2006 12:00 PM Default Profil e Mon 05.01.2006 Stand By Menu Default Profil e Stand By Menu Default Profil e Stand By Menu 1 ON OFF 2 ON OFF OFF 1 ON 1 ON OFF OFF 3 ON OFF 2 ON 4 ON OFF 2 ON OFF OFF 3 ON 3 ON OFF OFF 4 ON 4 ON OFF << >> x1 NEw appears on various AREA screens as a prompt to create << NEW >> something new (Area, Profile, Event, etc.) x1 Back Home All Devices 1. All Devices 2. <
Краткое содержание страницы № 6
ICON DESCRIPTION Undefined device Center button Single choice (radio button) - not chosen Single choice (radio button) - chosen Multiple selection (checkbox) - not selected Multiple selection (checkbox) - selected Remote Control Zone/Scene Controller (Single or Multibutton) Dimmer Switch Thermostat Buzzer OFF (indication) Buzzer OFF Buzzer ON Error Indication Filter (data on screen is filtered) Battery Power STARTUP TM Upon initial power up of the RZCPG, the VIZIA RF logo will appear briefly. Y
Краткое содержание страницы № 7
INSTALLATION CHECKLIST Leviton provides the Installation Checklist as a step TM by step tool to setup your Vizia RF network and recommends following these steps in order, specifically if you are a first time user. System design will impact performance, so it is necessary to include and update your devices in a specific order to ensure overall system performance and reliability. The Installation Checklist steps are shown below. When a step is completed, simply press the right soft key
Краткое содержание страницы № 8
TEXT EDITOR x1 Using TEXT EDITOR you can x1 12:00 PM either assign a name from a list Mon 05.01.200TEXT EDIT 6 OR x1 of templates or assign a unique Switch #2 Leviton name to your device. 12:00 PM Switch #2 Default Profil e Mon 05.01.2006 NOTE: The right soft key will Stand By Menu Save? Press toggle from Template to Abc to Template ABC to abc to 123 and back to Default Profil e Template again. This feature allows you to access Stand By Menu x1 the template names or to se
Краткое содержание страницы № 9
x1 Press the center button on the 12:00 PM x1 RZCPG to bring up the Mon 05.01.2006 INCLUDE INCLUDE CNTRLLER Place controller CNTRLLER screen, where you will in program mode be prompted to place the controller See Instruction sheet Default Profil e in program mode. Stand By Menu Begin? Press NOTE: Leviton Controllers require Return an inclusion process that differs from Dimmers, Switches and Plug- In Modules. Controllers must be placed into program mode before they can be include
Краткое содержание страницы № 10
x1 The RZCPG will prompt you to UPDATE stand within 3 feet of that controller. Please stand within Press the right soft key (YES) 3 ft from controller to update your controller. NOTE: and press YES It is important that you remain to continue within 3 ft. of the controller NO YES you've selected from the list. If you are unsure about which x1 controller you are updating UPDATE you can use the "who Is" Node Updated! Node ID #4 command (see pg. 13). Room controller Leviton controller
Краткое содержание страницы № 11
Scroll to and press the center x1 button to select Add Devices x1 x1 -RZCPG- -RZCPG- Default Profile Default Profile AREA #1 which will bring up a list of the 1. Area #1 1. Area #1 2. Area #2 2. Area #2 3. Area #3 3. Area #3 Bedroom 4. Area #4 4. Area #4 dimmers and switches you Stand By Menu Stand By Menu Bathroom included in Step 1 to add to your Hall new area. Scroll to each device selected 1 check box and use the and ( ) Back 3 Who Is buttons to either add or subtract
Краткое содержание страницы № 12
The CONTROLLER ASSOC x1 screen will display with the CONTROLLER ASSOC selection box around 1. Button Dev: Room Controller 1. < Button 1 > prompting you to select the 2. Area #1 button on your controller that 3. Area ON/OFF you wish to associate an area to. Cancel Save Use side arrow buttons to toggle if applicable. Scroll to 2. Area and choose an area you wish to associate to the button you've selected. This will allow the button on the chosen controller to control the desired a
Краткое содержание страницы № 13
Press right soft key (Save) to complete. NOTE: Selecting will lock the RZCPG. When you return to the HOME screen you will not have access to the MAIN MENU nor any screens until you press the right soft key and enter your password. < > Selecting System Lock will only lock System Setup, preventing one from changing how the system is configured until the password is entered upon prompt. Install Complete STEP 7 x1 INSTALL CHECKLIST NOTE: The INSTALL 3. Update Control
Краткое содержание страницы № 14
MAIN MENU SCREEN Pressing the right soft key while on the HOME screen will bring up the MAIN MENU screen where you can navigate through the various selections to edit or change settings. x1 x1 MAIN MENU MAIN MENU 1. Device List 2. Who Is 2. Who Is 3. Area 3. Area 4. Profile 4. Profile 5. Settings 5. Settings 6. System Setup Bac k Home Bac k Home DEVICE LIST x1 Selecting 1. Device List from the MENU screen will bring you to DEVICE LIST R RZCPG C the DEVICE LIST screen where Bedroo
Краткое содержание страницы № 15
AREA Selecting 3. Area from the MENU screen will bring you to the AREA screen. You can create a new area, rename an existing area, modify devices in an area or delete an area (refer to Step 4 of INSTALLATION CHECKLIST - Create Areas pg.9). PROfILE Selecting 4. Profile from the MENU screen will bring you to the PROfILE screen. Up to 16 profiles can be created to control different areas of your house with your RZCPG. Each device may be controlled by assigning an area to one of the four but
Краткое содержание страницы № 16
The HOME screen will display x1 with your newly created profile. -RZCPG- x1 Default Profile -RZCPG- Use the side arrow buttons Default Profile 1. Area #1 1. Area #1 2. Area #2 3. Area #3 to toggle between profiles when 4. Area #4 2. Area #2 Menu Stand By on the HOME screen. Default 3. Area #3 4. Area #4 Profile will display when none Stand By Menu are selected. Use the button to deselect a profile. OFF 1 ON 2 ON OFF SETTINGS 3 ON OFF 4 ON OFF x1 Selecting 5. Setting
Краткое содержание страницы № 17
SECURITY Sets the password and lock level for your RZCPG or System (refer to INSTALLATION CHECKLIST - Security pg. 11). BATTERY LEVEL Displays the battery level for your x1 RZCPG as follows: BATTERY LEVEL 1. Select Battery Level. - 2.88 + Back Home SYSTEM SETUP Selecting 7. System Setup x1 from the MAIN MENU screen SYSTEM SETUP 1. Install Checklist will bring you to the SYSTEM 2. Advanced SETUP screen. Selecting 1. Install Checklist brings you to the Installation Back Home Checklist (re
Краткое содержание страницы № 18
NETwORK Selecting 1. Network from the ADVANCED screen will bring you to the NETwORK screen. x1 x1 x1 ADVANCED NETWORK NETWORK 1. Network 1. Include Node 5. Remove Failed 2. Association 2. Exclude Node 6. Join Network 3. HAI Setup 3. Ntwk Rediscovery 7. RZCPG Utils 4. RTS Devices 4. Update Devices 8. Replace Node 5. Utilities 5. Remove Failed 9. Dev Properties Back Home Back Home Back Home 1. Include Node (refer to INSTALLATION CHECKLIST pg. 5) 2. Exclude Node Use this option to remove a
Краткое содержание страницы № 19
as a secondary remote to x1 the network. Press the right REMOVE FAILED soft key (YES) after the Bedroom prompt to continue. NOTE: Node 2 Remove? This step will erase any existing data in the remote. NO YES You will then be required to include this remote with your x1 primary controller. follow JOIN AS SECONDARY the controller inclusion/ WARNING! replication process of This step will erase all the data your primary controller Continue? (for RZCPG see pg. 7). This secondary remote w
Краткое содержание страницы № 20
data. Follow the prompts to x1 complete this process. RX DATA Setup Data NOTE: Update DB (no. 3 Areas Profiles and 4) are only available on secondary RZCPG remotes. Select receive items Start? Press 3. Update DB (Man) is used Back Home to manually perform a database update (devices in the network, their names and types) for a secondary remote that has joined the network. It will require you to press buttons on each individual device you wish to update in your secondary remote. 4. Upd
