Руководство по эксплуатации Kenwood KDC-MP928

Краткое содержание страницы № 1

CD-RECEIVER
KDC-MP928
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your KENWOOD dealer for information or service on the product

Краткое содержание страницы № 2

Contents Safety precautions 4 RDS features 31 Radio Text Scroll Notes 5 Registration of a station as a PTY PTY (Program Type) Warning 6 Program Type preset About CDs 7 CD/Audio file/External disc control features 33 About AAC, MP3 and WMA 8 Playing CD & Audio file Playing External Disc Notes on Multi-function System 9 Fast Forwarding and Reversing Track/File Search General features 10 Disc Search/Folder Search Power Direct Track/File Search Selecting the Source Direct Disc Search Volume Track/F

Краткое содержание страницы № 3

Menu system 44 Basic Operations of remote control 53 Menu System Accessories/ Installation Procedure 56 Security Code Touch Sensor Tone Connecting Wires to Terminals 57 Manual Clock Adjustment Date Adjustment Installation 58 Date Mode Synchronize Clock Removing the Unit 60 DSI (Disabled System Indicator) Selectable Illumination Troubleshooting Guide 61 Dimmer Contrast Adjustment Specifications 64 Display-reversing Setting Built-in Amp Setting G-Counter Level set G-Analyzer Reset G-Analyzer Calib

Краткое содержание страницы № 4

Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Never watch the G-Analyzer Display s

Краткое содержание страницы № 5

Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • If the unit fails to operate properly, press the Reset (page 52). button to restore factory settings. • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be About ODD (Offset Dual D

Краткое содержание страницы № 6

Notes 2Warning About "Media Manager" of PC application 2CAUTION • "Media Manager" is recorded in the CD-ROM Use of controls or adjustments or performance of attached to this unit. procedures other than those specified herein may result in hazardous radiation exposure. • Refer to the attached installation manual for the In compliance with Federal Regulations, following installation method of "Media Manager". are reproductions of labels on, or inside the product • Refer to the user’s manual

Краткое содержание страницы № 7

About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that cannot be used • CDs that are nott round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be

Краткое содержание страницы № 8

About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called The maximum number of characters for Audio file) and the media format has the following display limitation. The Audio file, which is not comforming File/Folder name: 128 characters to the specification, may not play normally, or the MP3 ID3 Tag/ WMA Contents property file and folder names may not display correctly. : 30 characters AAC song information: 60 characters • Attach the correct extension for the Audio file (AAC:

Краткое содержание страницы № 9

Notes on Multi-function System What is the Multi-function System? Real operational example of the Multi- Multi-function System shows the Multi-function function System display, allowing you to select various functions and Example: T urning ON/OFF the Random Play during settings. CD play. Functions available for the current source are 1. Show the Multi-function display of the Random displayed. Play. Press the [NEXT] button. Operational 1 Press the [NEXT] button to Show the Multi- Scan Rando

Краткое содержание страницы № 10

General features ATT NEXT/MENU ANG VOL AUTO SRC Control knob Release button ATT indicator Power • The DAB tuner and the HD Radio tuner must be Turning ON the Power connected one at a time. Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Volume Increasing Volume Selecting the Source Turn the [VOL] knob clockwise. Press the [SRC] button. Decreasing Volume Turn the [VOL] knob counterclockwise. Source required Display SIRIUS tuner (Optional acc

Краткое содержание страницы № 11

Audio Control 4 Setup the Audio item Turn the [VOL] knob. 1 Select the source to adjust Adjustment Item Display Range Press the [SRC] button. Volume offset "VOLUME OFFSET" –8 — 0 2 Enter Audio Control mode Dual Zone System "2ZONE" ON/OFF Press the [VOL] knob. 3 Select the Audio item to adjust • Volume offset: Sets each source’s volume as a Press the [VOL] knob. difference from the basic volume. Each time you press the knob, the item to be • Dual Zone System adjusted alternates between the ite

Краткое содержание страницы № 12

General features 12 3 Subwoofer Output Sound Field control item "X'Over" "HPF Front" "fc" Front High Pass Filter Frequency Turning the Subwoofer output ON or OFF. "SLP" Front High Pass Filter Slope Hold down on [AM] of the Control knob for at "HPF Rear"*¹ "fc" Rear High Pass Filter Frequency least 1 second. "SLP" Rear High Pass Filter Slope Each time you press the button, Subwoofer "LPF "fc" Subwoofer Low Pass Filter Frequency SubWoofer"*² "SLP" Subwoofer Low Pass Filter Slope output switches O

Краткое содержание страницы № 13

DTA Front/DTA Rear 0 — 20.33 (feet) DTA Subwoofer • "Preset": Y ou can store an adjusted sound control Position Setting Front-Left/ Front-Right/ value by selecting "Memory". Refer to Front/ ALL (page 16). Also, you can recall it by selecting "Recall". Refer to (page 16). • When the "2ZONE" of

Краткое содержание страницы № 14

General features Equalizer Control Top 40 "Top40" Jazz "Jazz" 1 Select the source to adjust Press the [SRC] button. • User memory: 2 Show the Multi-function display The values set on the . appears. • Change each setting value with the (page Management system> (page 13). 9). First, select the speaker type with the Speaker setting. 3 Enter Equalizer

Краткое содержание страницы № 15

WOW Control Item Range Effect Middle/High/User/Through/Low • To get the best sound, first set the Cabin Setting FOCUS OFF/1 — 9 and Speaker Select Front/Rear parameters using the TruBass Front OFF/1 — 4 (page 13). TruBass Rear OFF/1 — 4 6 Exit Equalizer Control mode SRS 3D OFF/1 — 4 Turn the [VOL] knob to select "Return". Press the [VOL] knob. • Effect: TruBass, FOCUS and SRS 3D are all set to values shown in the table below. Effect TruBass FOCUS SRS 3D WOW Control

Краткое содержание страницы № 16

General features Bypass Control 4 Put in the memory Turn the [VOL] knob to select "Memory1" or Temorarily bypassing DSP (Digital Signal "Memory2". Processor) System. Press the [VOL] knob for at least 2 seconds. The "MEMORY" display blinks 1 time. 1 Select the source to adjust Press the [SRC] button. 5 Exit Memory mode Turn the [VOL] knob to select "Return". 2 Show the Multi-function display Press the [VOL] knob. Press the [NEXT] button repeatedly until "DSP" appears. Refer to

Краткое содержание страницы № 17

"Recall1": Recall the value put in "Memory1" by 2 Push the faceplate in until it clicks. (page 16). The faceplate is locked in place, allowing you to "Recall2": Recall the value put in "Memory2" by use the unit. (page 16). 7 Exit Memory Recall mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Faceplate Angle Adju

Краткое содержание страницы № 18

General features 8 Graphic display part Display Type Selection 9 G-Analyzer display part Changing the display mode. 5 Exit display control mode 1 Show the Multi-function display Turn the [VOL] knob to select "Return". Press the [NEXT] button repeatedly until Press the [VOL] knob. "Display" appears. Refer to (page • Change the inf ormation by the Display Type. Refer to 9). the page on the following table for the methods to alternate by the Display Type. 2 Enter

Краткое содержание страницы № 19

2 Select the wallpaper. 6 Select the graphic/ spectrum analyzer Push the Control knob towards [FM] or display part display [AM]. Push the Control knob towards [4] or Each time you push the knob, the Wallpaper [¢]. changes. Each time you press the button, the graphic display/ spectrum analyzer display alternates 3 Exit Display Control mode between the displays shown in the table below. Turn the [VOL] knob to select "Return". Press the [VOL] knob. Graphic display/ Spectrum Analyzer display M

Краткое содержание страницы № 20

General features Display Type B In Audio file source Text Selection for Display Information Display Song title & Artist name "Title/Artist"* Selecting the text display. Album name & Artist name "Album/Artist"* 1 Show the Multi-function display Folder name "Folder Name" Press the [NEXT] button repeatedly until File name "File Name" "Display" appears. File number & Play time "P-Time" Refer to (page Clock "Clock" 9). Date "Date" 2 Enter display control mode In HD Ra