Краткое содержание страницы № 1
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ITEM 69488
1650 PSI
ElEctrIc
PrESSurE
WaSE h r
Visit our website at: http://www.harborfre
Краткое содержание страницы № 2
SaFEty SEtup OpERatiOn maintEnancE t able of contents Safety ......................................................... 3 Maintenance .............................................. 14 Setup .......................................................... 7 Parts Lists and Assembly Diagrams .......... 16 Specifications ............................................. 7 Warranty .................................................... 20 Operation ................................................... 10 WaRninG S
Краткое содержание страницы № 3
impORtant SaFEty inStRuctiOnS WaRninG When using this product basic precautions should always be followed, including the following: Safety Warnings 1. Read all the instructions before using the product. 11. Connect to individual branch circuit only. 2. To reduce the risk of injury, close supervision is 12. WARNING – To reduce the risk of electrocution, necessary when a product is used near children. keep all connections dry and off the ground. Do not touch plug with wet hands. 3. Know how to
Краткое содержание страницы № 4
SaFEty SEtup OpERatiOn maintEnancE Operating precautions 1. Disconnect the plug from the power source 12. WARNING: The brass components of this before making any adjustments, changing product contain lead, a chemical known to accessories, or storing pressure washers. Such the State of California to cause birth defects preventive safety measures reduce the risk of (or other reproductive harm). (California starting the pressure washer accidentally. Health & Safety code § 25249.5, et seq.) 2.
Краткое содержание страницы № 5
Vibration hazard: This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury: 1. Anyone using vibrating tools regularly or for an 2. Do not smoke during use. Nicotine reduces extended period should first be examined by a the blood supply to the hands and fingers, doctor and then have regular medical check- increasing the risk of vib
Краткое содержание страницы № 6
SaFEty SEtup OpERatiOn maintEnancE Symbology WARNING marking concerning Risk Double Insulated of Eye Injury. Wear ANSI-approved safety goggles with side shields. Canadian Standards Association Read the manual before set-up and/or use. Interlink Testing Services WARNING marking concerning Risk of Electric Shock. Properly connect power cord Volts Alternating Current to appropriate outlet. V~ WARNING marking concerning Risk of Injection. Amperes Do not direct spray at any a person or an
Краткое содержание страницы № 7
Specifications Electrical Rating 120V~ / 60Hz / 13A Maximum Pressure 1650 PSI Maximum Flow Rate 1.25 GPM High Pressure Hose 13-3/4 FT. Power Cord 35 ft. Setup – Before use: Read the EntiRE impORtant SaFEty inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO pREVEnt SERiOuS injuR y FROm acciDEntal OpERatiOn: t urn the power Switch of the tool off, unplug the tool from its electrical outlet, shut off the wat
Краткое содержание страницы № 8
SaFEty SEtup OpERatiOn maintEnancE assembly note: For additional information regarding the parts listed in the following pages, refer to Parts Lists and Assembly Diagrams on page 16. Some of the following assembly steps may have been performed at the factory. 1. Check the Inlet Strainer for any blockage, including packaging debris. Remove any plastic plugs from the water inlet/outlet. 2. Attach the Gun/Extension Nozzle holder to the side of the body. 3. Attach the Han
Краткое содержание страницы № 9
Features note: Familiarize yourself with the location and function of all of the machine’s controls before proceeding to setup of the machine. 1. this item is equipped with a the GFci device does not protect GFci (Ground Fault circuit interruption) plug. against electrical shock due to contact Read and follow these GFci precautions: with both circuit conductors or a fault WaRninG! tO pREVEnt ElEctRic ShOck in any wiring supplying this device. anD DEath: Should replacement of the GFci power
Краткое содержание страницы № 10
SaFEty SEtup OpERatiOn maintEnancE Operating instructions Read the EntiRE impORtant SaFEty inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Work piece and Work area Set up 1. Designate a work area that is clean and well-lit. 4. PLAN OUT THE jOB: Plan out what areas will be The work area must not allow access by children cleaned, how many sessions will be necessary, or pets to prevent distraction and injury
Краткое содержание страницы № 11
t ool Set up tO pREVEnt SERiOuS injuR y FROm acciDEntal OpERatiOn: t urn the power Switch of the pressure washer off, unplug it from its electrical outlet, and relieve all pressure in a safe manner before making adjustments or installing accessories. 1. MAKE SURE THE WASHER IS CLEAN AND READy FOR USE. Ensure the inlet water strainer, nozzle, and the rest of the Washer are completely free of buildup or debris. 2. If using the Extension Nozzle, insert it into the end of the gun, pressing in
Краткое содержание страницы № 12
SaFEty SEtup OpERatiOn maintEnancE General Operating instructions 1. Point the Nozzle in a safe direction. Press in the note: If the unit does not turn on or turns off Safety Lock Button to unlock the Trigger and suddenly, check and reset the GFCI. squeeze the Trigger to check that all pressure is 4. Unlock the Safety Lock Button and squeeze released from the unit. Release the Trigger. the Trigger to start the stream. Be aware that note: The Gun’s safety lock feature locks the Trigger when i
Краткое содержание страницы № 13
Operating t ips For a vertical or sloped surface: Become Familiar With your machine: a. Wash from the top down. 1. Before beginning work, set aside enough time to b. If possible, direct the stream in the same familiarize yourself with this machine’s cleaning direction as the slope towards a draining area. rate and capacity along with all instructions This will enable better drainage and and precautions contained in this section, therefore better cleaning. along with the Operating Instruc
Краткое содержание страницы № 14
SaFEty SEtup OpERatiOn maintEnancE maintenance and Servicing tO pREVEnt SERiOuS injuR y FROm acciDEntal OpERatiOn: t urn the power Switch of the tool off, unplug the tool from its electrical outlet, shut off the water supply and safely discharge all residual water pressure from the unit before performing any inspection, maintenance, or cleaning procedures. tO pREVEnt SERiOuS injuR y FROm t OOl F ailuRE: Do not use damaged equipment. if abnormal noise or vibration occurs, have the problem c
Краткое содержание страницы № 15
t roubleshooting problem possible causes likely Solutions Pressure Washer 1. Cord not connected. 1. Check that cord is plugged in. will not start 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads. 3. GFCI circuit breaker tripped. 3. Press reset button on GFCI unit on cord. 4. Internal damage or wear. 4. Have a qualified techni
Краткое содержание страницы № 16
SaFEty SEtup OpERatiOn maintEnancE parts lists and assembly Diagrams pump assembly parts list part Description Qty part Description Qty 1 Outlet 1 32 Capscrew 4 2 Spring 1 33 Spring Washer 4 3 O-Ring 1 34 Pump Body 1 4 Sleeve 1 35 O-Ring 6 5 O-Ring 1 36 O-Ring 6 6 Valve Core 1 37 Valve Seat 6 7 Valve Core Spring 1 38 Valve Core 6 8 jacket 1 39 Valve 6 9 O-Ring 1 40 Valve Spring 6 10 O-Ring 1 41 O-Ring 6 11 Piston 1 42 Valve Cap 6 12 Piston Spring 1 43 y-Ring 3 13 Piston Seat 1 44 O-Ring 3 14 O-R
Краткое содержание страницы № 17
55 53 52 51 60 59 58 57 56 54 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 35 34 33 32 21 22 23 24 25 62 61 26 27 28 29 30 31 pump assembly Diagram SKU 69488 For technical questions, please call 1-800-444-3353. Page 17 maintEnancE OpERatiOn SEtup SaFEty
Краткое содержание страницы № 18
SaFEty SEtup OpERatiOn maintEnancE pressure Washer parts list and assembly Diagram part Description Qty part Description Qty 1a Power Switch Cover 1 13a Wheel 1 2a Power Switch 1 14a Heat Guard 1 3a Front Panel 1 15a Fan Cover 1 4a Upper Housing 1 16a Pump Asm. 1 5a Waterproof Cover 1 17a Left Motor Cover 1 6a Right Motor Cover 1 18a Cushion 1 7a Cord Protector 1 19a Gun/Extension Nozzle Holder 1 8a Cord Clamp 1 20a Upper Heat Guard 1 9a Handle Extension 1 21a Gun 1 10a Bottom Housing 1 22a Exte
Краткое содержание страницы № 19
plEaSE REaD thE FOllOWinG caREFully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEM
Краткое содержание страницы № 20
limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installatio
